Question about Bissell 9200 Upright Vacuum

1 Answer

Bissell Proheat 2x 9200

Water will not despense from the bottom of the unit or from the hand tool.

Posted by on

  • beanie7269 Sep 25, 2008

    I also have this problem. Water will not spray out of the hand nozzel or the floor sprayer. I took it apart and cleaned all the hoses and filters and it still does not spray

  • jeankoroly Nov 01, 2008

    no water or cleaning solution is dispensing from bottom of machine. Hand dispenser is working ok

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

Ensure you have water in tank and solution (or water in solution tank). When you start the vacuum up, the pump starts to prime itself. If you have air in the system, it takes a little longer to prime. Allow the vacuum to run for 1 minute before attempting to pull the trigger. Then pull the trigger.
If this doesn't work, you'll need to open the unit up and check the hoses for any clogs, and next test the pump to see if it is functioning.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hand tool works wount for floor


see the videos from bissell and troubleshooting :
http://www.bissell.com/how-to-videos/
God bless you

Jul 27, 2012 | Bissell 2X Proheat 9200 rug cleaner

1 Answer

Bissell proheat 2x carpet cleaner 9200 How do i


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101

teyet

Jul 22, 2010 | Bissell 7901-1 ProHeat Scotchgard Upright...

1 Answer

Have a model 9200 that is not dispensing fluid,


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
bnv,nm

Jul 17, 2010 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

I have bissell proheat 2x 9200 no water or cleaning solution is dispensing from bottom of machine hand dispenser is not working too. how can I troubleshoot it?


Ensure you have water in tank and solution (or water in solution tank). When you start the vacuum up, the pump starts to prime itself. If you have air in the system, it takes a little longer to prime. Allow the vacuum to run for 1 minute before attempting to pull the trigger. Then pull the trigger.

If this doesn't work, you'll need to open the unit up and check the hoses for any clogs, and next test the pump to see if it is functioning.

Jan 21, 2010 | Bissell 9200 Upright Vacuum

1 Answer

Bissell 2X Proheat 9200 - uses lots of cleaner.


May be that the cap and valves on the bottom of the tank is not shutting like it should and letting too much to come out. You may have to replace them.

Mar 10, 2008 | Vacuums

Not finding what you are looking for?
Bissell 9200 Upright Vacuum Logo

474 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Brad Brown

Level 3 Expert

13536 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...