Question about Hoover Floormate H3000 Upright Wet/Dry Vacuum

1 Answer

Floor Mate Need to find REPAIR, not owners manual for hoover floormate spinscrub 810 for disassembly instructions

Posted by on

  • wellener_ann Sep 26, 2008

    I took off the brushes to clean them when the floor roller assembly fell off. Now it doesn't seem want to stay in place when I put it back. What am I doing wrong?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

There is a black shaft with a black circular arm at a right angle to the shaft. The black plastic arm that sticks out of the front ( farthest away from the hinge) of the roller assembly plugs into the circular arm so that moving the scrub/vacuum slider causes the roller assembly to move up and down. I can do it with my finger, or use a flat blade screwdriver. I'm assuming you mean the black plastic thing with the little rollers on it.
Kirk Thompson
San Juan, PR

Posted on Oct 28, 2008

  • Kirk Thompson Oct 29, 2008

    I forgot a step. There is a black rectangular spring loaded device that must be pushed into the roller block before it will go all the way down so you can then connect the pin to the circular arm as mentioned before. It will end up beside a white round pin sticking up. It is the resistance for the wet/dry foot switch.



    Kirk Thompson

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I Replace reservoir and tubing assembly on a hoover floor mate?


Hello, this is Ava with Think Crucial.

You may check the online manual for Hoover Floormate in this link: Hoover FloorMATE Hard Floor Cleaner Owner Manual Also, you may call Hoover for assistance which is 800-944-9200

You can order replacement filters for your Hoover Floormate directly to us. You can check the filters in this link: http://www.thinkcrucial.com/search?type=product&q=hoover+floormate

As a special offer here is an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Oct 13, 2016 | Hoover Vacuums

2 Answers

Hi, how do I check my hoover floormate deluxe spinscrub's filter and motor?


Hi Mike! To check the filter on the Floormate deluxe, remove the dirty water tank and pull up on tank lid to separate from the base. Check foam filter for debris, if filter has debris, rinse it with water. To prevent internal damage make sure you are using only the Hoover Floormate detergent. If the machine is still noisy and smells bad we recommend taking it in to a Hoover authorized service center. Follow the link to find the nearest service center to you. Hope this helps! Service Center Locator

Oct 20, 2014 | Hoover Vacuums

1 Answer

Owners Manual For Hoover FloorMate H3060 Lost


Here you go

http://www.hoover.com/pdfs/manuals/H3060.pdf

Aug 23, 2009 | Hoover H3060 FloorMate SpinScrub 800...

1 Answer

Troubleshoot floormate spinscrub 800 floor cleaner


The brushes are not designed to scub the floor, they only lightly touch the floor. Make sure the front nozzle is put on correcdtly. Make sure your filter is dry and clean. I wet filter will give poor suction down to the nozzel. Down load the manuel at Hoover.com. The model is located on the back of the unit. H3000, or H3010

May 24, 2009 | Hoover Floormate H3000 Upright Wet/Dry...

3 Answers

I have misplaced my instructions and need to use it today


Thank You, but after I sent the FixYa mail yesterday, I finally found my instruction book.

I am not interested in a repair program at this time.

Diner

Aug 27, 2008 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

I just bought a hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the brissles at all. Help please. It is brand new. any ideas???


http://geeksquad.fixya.com/ThreadView.aspx?prdid=40471&thid=603805
I just bought a Hoover
Posted by serdmann4 on May 17, 2008
I just bought a Hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the bristles at all. Help please. It is brand new. Any ideas???

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Hoover Floormate H3000 Upright Wet/Dry Vacuum. You can down load the owner manual from the Hoover website www.hoover.com . It looks like the one of the holding or recovery tanks my not be in place, leaking, cracked or damaged, or the clear tube is leaking and needs replacing. I looked 2 the owner’s manual and it does not show the clear tube but the vacuum does come apart and just back track the clear tube and mark the screws when you disassemble the unit. Other wise , please call the factory or a local Hoover warranty station in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

May 17, 2008 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Need instructions for operation


The last time I checked, manuals were available on www.hoover.com.

Mar 21, 2008 | Hoover H3030 FloorMate SpinScrub 500...

3 Answers

Hoover Floormate SpinScrub won't dispense cleaning liquid


I had the same problem and was preparing to take it back, the last thing I tried was to 'reseat' the handle -- I removed it then snapped it very firmly back into place. That did it, it's working beautifully now!

Nov 25, 2006 | Hoover H3030 FloorMate SpinScrub 500...

Not finding what you are looking for?
Hoover Floormate H3000 Upright Wet/Dry Vacuum Logo

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...