Question about Nikon Monarch ATB 7345 Binocular

1 Answer

Nikon Monarch 10 x 42

I have a pair of Nikon Monarch 10 x 42 binos. I love them except for the eye cup design. Both are broken. Where can I get a replacement.

thanks

mike

Posted by on

  • 2 more comments 
  • Anonymous Oct 25, 2008

    ? help

  • Anonymous Dec 14, 2008

    Broken turn eye piece

  • Anonymous Jan 25, 2009

    I have one eyepiece broken,the small steel ball that rolls in the groove fell out.

  • Anonymous Feb 12, 2009

    Bino's fantastic BUT Eye piece broken.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

If the warranty has expired you can't get any replacement
you have to buy a new one

if not talk to the shopkeeper or write a letter to the company

Posted on Oct 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i find out what meade telescope i have


Check for similar items on the Meade site.

Jan 12, 2017 | The Optics

1 Answer

Will the 407746 marlin mag. Fit in a marlin 795


So, you love the look of sustainable, eco-pleasant bamboo flooring, and the idea of reduced-flow bathrooms and geothermal heating get the eco-friendly warrior in you all excited. There's only one problem. AmanStino Ultra Slim Lightweight Smart shell Stand Cover with Auto Wake...

Jan 10, 2017 | The Optics

1 Answer

Beemans sportsman rs2 trigger system not engaging after the break barrel been bend goes blank


Do you mean that you have never been able to cock the rifle ever

Like get the piston to lock up to the sear if so

Return to where you purchased it and get them to sort it

Mar 17, 2015 | Optics

1 Answer

I have a hand gun made by Hopkins and Allen Arms and the serial number is 9491. I would like to know the year it was made. Thank you


You would have to know the model and variation. There are H&A collector's reference works that might tell you. Mid 1910s would be a good guess.

Feb 18, 2015 | Optics

1 Answer

I have a single shot 20 ga.and the stalk is broke can i get replacement stalk and four arm


Tom,
Sounds like a nice project to repair and pass along to grand kids. You will likely need to provide some pictures if you want to identify it or take it by a knowledgeable gunsmith or collector. replacement "stocks" and forearms are available. A good craftsman could even fabricate replacements from scratch. Good luck.

Jan 04, 2015 | Optics

2 Answers

4005776


What type of chainsaw or product?

Sep 07, 2014 | Optics

1 Answer

Harrington richardson arms


You didn\'t state what make, or type (pistol, revolver, rifle or shotgun) of H&R you have, so I can only give generalizations.



As a general rule, centerfire rifle\'s and handgun\'s firing pin protrusion usually measure between .050" and .060".

Shotguns are a little longer at .055" to .065".

Rimfire guns usually fall into the .028" to .035" range.





Once you have established that the firing pin protrusion is within an acceptable range, you can get a rough idea of hammer spring strength by looking at the primer on some fired rounds for how deep and pronounced the indent is.



Also, you mentioned that some brand(s) of ammo fired more reliably than others.



Some ammo requires a harder "hit" from the firing pin to ignite the primer.

This has to do with factors such as the alloy composition of the primer "cup" (some are harder than others, requiring a harder "hit"), some primer compounds are more sensitive than others, etc.



So maybe experiment with different brands and see which ammo works best for you.

Aug 28, 2014 | Optics

Not finding what you are looking for?
Nikon Monarch ATB 7345 Binocular Logo

Related Topics:

927 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Optics Experts

kakima

Level 3 Expert

100140 Answers

pictureman4u

Level 2 Expert

126 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Nikon Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...