Question about Compaq Pesario S4120WM (DK216AR#ABA) PC Desktop
This was the worst answer I've seen anywhere in quite some time. If this guy is an expert I'd hate to see a novice.
Posted on Dec 16, 2009
You are printing a web site page i pressume, this doesn't always work, the best way is to copy the page and paste into word, then print it off.
Posted on Sep 03, 2008
Tips for a great answer:
Nov 13, 2013 | Dell Dimension PC Desktops
00 = Divide Fault
Occurs if division by zero is attempted or if the result of the operation does not fit in the destination operand.
Interrupt 2 is reserved for the hardware Non-Maskable-Interrupt condition. No exceptions trap through interrupt 2.
Occurs after an INTRO instruction has executed and the OF bit is set to 1.
05=Bounds Check fault
The array Index is out of range
06=Invalid Opcode fault
This error can be caused by one of the below conditions.
07=Copressor not available fault.
This error can occur if no math coprocessor is present. This error can also occur when the math coprocessor is used and a task switch is executed.
This error occurs when processing an exception triggers a second exception.
09(OD)=Copressor Segment Overrun.
Floating point operand is outside the segment.
10(0Ah/0A)=Invalid Task State Segment Fault
Can be caused by a number of possibilities as Task State Segment contains a number of descriptors.
11(0Bh)=Not Present Fault
The Not Present interrupt allows the operating system to implement virtual memory through the segmentation mechanism. 0B fault occurs when this segment is not available.
Occurs when instruction refers to memory beyond the limit of the stack segment.
13(Odh)=General Protection Fault
Caused by any condition that is not covered by any of the other processor exceptions. The exception indicates that this program has been corrupted in memory generally resulting in the immediate termination of the program.
Occurs when a paging protection rule is violated (when the retrieve fails, data retrieved is invalid or the code that issued the fault broke the protection rule for the processor).
16(10h)=Coprocessor error fault
Occurs when an unmasked floating-point exception has signaled a previous instruction.
17(11h)=Alignment Check Fault
Only used on 80486 computers. Caused when code executing at ring privilege 3 attempts to access a word operand that is not divisible by four, or a long real or temp real whose address is not divisible by eight.
Find out the reason of Fatal Error if that is due to Software related then go in safe mode and uninstall the software recently installed or udate them/patch them. or if the same is related to hardware then unplug the recently added hardware,
Aug 21, 2011 | PC Desktops
Mar 10, 2010 | Dell Dimension XPS 600 PC Desktop
Sep 22, 2009 | Dell Dimension C521 PC Desktop
Sep 04, 2009 | Dell Dimension C521 PC Desktop
Aug 23, 2008 | PC Desktops
Jul 24, 2008 | PC Desktops
May 14, 2008 | HP PC Desktops
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: