Question about Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

1 Answer

No cleaning fluid or water comming out of cleaner

This is a new bissel proheat carpet cleaner. when using it it will shoot out fluid and the belt wheel on top is spinning off and on to show the brushes are turning but then the wheel stops and fluid quits comming out why !!!

Posted by on

  • walkingwalts Oct 15, 2008

    No cleaning fluid or water spray. Inst. new pump and belt. no help? Checked all hose and all secure. no blockage could not be found? Water don"t seem to flow from water tank to pump. and there is no restricted reason water should not flow?





×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Not sure of your model but on most of the bissell's ( except there new style) the belt drives the pump and the brush on the bottom. no pump action then no spray action. you probably need a new belt.

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brushes don't rotate on proheat2X,


How to Replace the Belt & Brushroll on Bissell ProHeat 2X ...

? 2:11
https://www.youtube.com/watch?v=Jj_43IHz9U4
Dec 28, 2012 - Uploaded by eVacuumBags
How to Replace the Belt & Brushroll on Bissell ProHeat 2X Series Carpet ... How to Replace Bissell Deep Cleaner Pump Belt orBrush Belt - Duration: 1:44. ... Won't SPRAY solution Rollers spin Fixing Bissell ProHeat Carpet ...

Brushes Will Not Rotate Deep Clean Essential - YouTube

? 0:53
https://www.youtube.com/watch?v=gbEXY5jkWSc
Apr 9, 2015 - Uploaded by BISSELL
If your machine is turned on and in the upright position yourbrushes will not turn. ... How to Replace the Belt & Brushroll on Bissell ProHeat 2X Series Carpet ... Won't SPRAY solution Rollers spin Fixing Bissell ProHeat Carpet ...

bissell pro heat 2x brushes wont spin Questions & Answers ...

www.fixya.com > Forum > Tags
... bissell pro heat pet 2x and my brushes won't turn or operate... check the belt belts ok brushes won't turn/rotate turn dial on bottom front on the water tank to ...

Feb 03, 2016 | Vacuums

1 Answer

Bissell pro heat steam carpet cleaner, not releasing water.


That means that you need to replace the pump belt. Here is the belt you need and a manual you can view:

Bissell 7901 Belt and Manual

Mar 01, 2010 | Bissell 7901-1 ProHeat Scotchgard Upright...

1 Answer

Bissell 7920 Problem


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
fghj

Jan 08, 2009 | Bissell 7920 ProHeat Pro-Tech Upright...

4 Answers

Want to Buy a Repair Manual for Bissell Proheat 9500 Clean Shot


I have the manual and would be more than willing to share...contact me at brewcrew2u@aol.com

Aug 19, 2008 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

Changing from carpet cleaning to hard floor cleaniang


http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618960&thid=540075
Changing from carpet cleaning to hard floor...
Posted by Charlottek on Apr 23, 2008
Bissell 9500 ProHeat 2X Clean Shot Upright
How do you change machine from carpet cleaning to hard floor cleaning?

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
The Bissell 9500 ProHeat 2X Clean Shot Upright are mainly designed to do mostly carpet, you can use it for bare floors, but for good wood floors I would use less water and pickup the water ASAP because you don’t want the good wood floor to warp - linoleum floors are fine but be careful with wood floors, and remember that the Bissell 9500 ProHeat 2X Clean Shot Uprights
Clean on the pull back, you squeeze the trigger, dispense water, the machine will use the scrubbing brushes to clean and the vacuum will pickup the water all in one smooth motion.
For further information please feel free to contact your local vacuum cleaner dealer in the area or the yellow pages or contact the Bissell Factory @ the information listed below:
http://www.bissell.com/ By Phone Customer Service:
(800) 237-7691 Hours:
M-F 8:00 a.m. - 10:00 p.m. ET
Saturday 9:00 a.m. - 8:00 p.m. ET

Thanks, Don – The Vac Man
Go Ahead. Use Us.

Apr 23, 2008 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

Bissel Proheat 2x "catches" when it is pushed forward-- Help Please!!!!


http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618960&thid=499675
Bissell ProHeat 2x "catches" when it is pushed...
Posted by Marlene101 on Apr 08, 2008
My ProHeat 2x bucks and catches when I try to push it forward-help!

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
Bissell 9500 ProHeat 2X Clean Shot Upright
The Bissell is not designed to be like a vacuum – it is designed to clean on the pull back, you dispense the Bissell cleaning fluid, the brushes scrub the carpet and the suction will vacuum up the excess water, the push forward will do the reverse action. You may want to refer to your owner’s manual and check out the trouble shooting guide for no water coming out. You may want to contact the factory or manufacturer to see if they have service tech support or to send out a new owner’s manual for your current model #. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.bissell.com/ By Phone Customer Service:
(800) 237-7691 Hours:
M-F 8:00 a.m. - 10:00 p.m. ET
Saturday 9:00 a.m. - 8:00 p.m. ET

Don – The Vac Man
Go Ahead. Use Us.

Apr 08, 2008 | Bissell 9500 ProHeat 2X CleanShot Upright...

5 Answers

Bissell proheat 1698 cleaner not spraying water


MY CARPET CLEANER WAS NOT SPRAYING ANY WATER OR CLEANING SOLUTION. I TOOK THE BACK OFF OF THE HEATER THAT IS IN THE HANDLE. IT WAS CLOGGED WITH CALCIUM DEPOSITS. I CLEANED THE HEATER AND PUT IT BACK TOGETHER AND IT WORKS GREAT. KEN

Feb 25, 2007 | Bissell 1698 PowerSteamer ProHeat Upright...

Not finding what you are looking for?
Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Brad Brown

Level 3 Expert

13530 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...