Question about HP LaserJet 1160 Printer

2 Answers

HP LaserJet 1160

After installing a new computer, my Hp LaserJet 1160 prints real slow. 50 seconds it starts the first page, basically a full minute until first page is finished. Specs are 8.3 seconds. What could be wrong?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 521 Answers

Change the usb wire and it will be ok.

Posted on Sep 03, 2008

  • tech expert12 Sep 03, 2008

    also check whether the print mode setting is on best mode then set it to normal for fast printing.

    for that click file on the left corner in that click print in that click properties in that in that check the print mode it will be listed just make it normal or make it draft for fast printing.its simple.do not forgot to apply the settings.or it will not change after you close the page it will again become as it what it was before.

    pls do rate the solution

    thanks.
    regards.
    fixya expert team

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

HI,

Please reinstall your printer drivers.

Posted on Sep 03, 2008

  • Priya darshan Sep 03, 2008

    Can you please let me know your Operating system so that i can give you the drivers.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to change font size larger when printing


Change the font on your document before printing

Jan 12, 2015 | Office Equipment & Supplies

1 Answer

How can i calibrate print head of pagewriter trim 1


It would help if you stated the manif. example. Phillips, HP, hewlett Packard. ect.

You should be able to find service information on the bottom of unit.

May 08, 2014 | Office Equipment & Supplies

1 Answer

Hp laserjet m1522f error 5 turn off and on


Hi, Error 5 is a Scanner error. When turning the printer on, have the lid up so you can watch the scanner movement. Does it move smoothly? It should go through a warm up and you should be able to watch the scanner movement. If there is a problem with the scanner, there isn't a lot you could do except. The service manual says the scanner assembly should be replaced. If it was my printer, I would try to take a closer look at the scanner assembly and check to see if the scanner unit is bound up somewhere, or maybe a drop of 3 in 1 oil on the scanner rails. Let us know what happens.
thanks

Oct 02, 2013 | Office Equipment & Supplies

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

3 Answers

HP Laserjet 3330. Scanner bulb warming up doesn't go away. I have done the "solution 1" as discribte but nothing is happening. It goes like: - i put the power on, hewlett packard is flashing, the...


How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

1 Answer

I have a hp photos mart d7360 printer and do not have the disk to instale


Hi,

You can download the required installation drivers and software from manufacturer's site by clicking this link

On the page which opens, select your operating system to download the appropriate drivers and software.

Hope this solves your problem. Thanks.

Nov 13, 2009 | Office Equipment & Supplies

1 Answer

Problem installing drivers for HP 4355 printer in vista 32bit OS


Vista OEM Cd usually doesnt come with drivers.

Printer should have come with its own cd which contains both the software & drivers.

If it didn't come with any
You can try using windows update
or
downloading drivers from hp site

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&cc=us&dlc=en&product=1138373&lang=en

Feb 24, 2008 | Office Equipment & Supplies

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
HP LaserJet 1160 Printer Logo

Related Topics:

872 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98766 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...