Question about Motorola Mobility RAZR V3

1 Answer

Razr V3 audio will only work on speaker phone

My daughter's phone will only allow her to use the speaker phone as regular audio is not working. Any suggestions as to cause and remedy?

Posted by on

  • Mike Miller
    Mike Miller Sep 03, 2008

    Have the same problem. I can barely hear using the regular earpiece, so I have to use the speaker phone. I've checked the volume settings and all is fine.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

If you quickly enther ##debug (##33284). if the 4 doesn't appear then that means the phone regognized the code. press END then once you see you home screen press CLR and then the LEFT SOFT key which brings you into the debug mode. ONce your in there be very carful not to change any settings for it can easily screw up your phone so be cautious. to go through the pages press the LEFT or RIGHT SOFT keys. more prefferd by pressing the RIGHT one. press it a few times till you come to the page where the first line says "ServOPT: NoChg". The second line or the line right after that says "AudioOpt: Auto". Scroll down to it by pressing the down button on your keypad then once the little pointer on the left of the screen is at "AudioOPT:". you'll notice that right on top of the RIGHT SOFT key says change. Pess that till it goes from "Auto" to "Spkr". once your finished all that press Exit (LEFT SOFT KEY) and you will see it going out of the editing mood. Press CLR and the LEFT SOFT key on the keypad again to Exit the debug mode. Once you out to the main screen again press ##debug again to disactivate the Debug mode. Again if the 4 doesn't appear then that means the code registered and it disactivated. If you won't disactivate it it will enter into the mode again by switching your phone off and on again. which you don't want to happen. however if it does happen press the CLR and LEFT SOFT key then you out again. then disactivate it again by pressing ##debug.
If that doesn't solve your problem then i'm sorry but i can't help you. I am also not responsible if you Screw up your Phone.
This only works on the Razr phones so don't try it on other phones.

Posted on Sep 04, 2008

  • drsumansinha Aug 31, 2011

    worked well. The trick is to press the CLR with left soft key to get in the debug mode. Thanks a lot. very best

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Razr only works on speakerphone


The other post refers to the process that allows you to use speaker only, instead of automatically selecting earpiece. Unfortunately, this will not resolve your issue, as it appears that your earpiece has a loose connection and must be repaired, or you can continue to use speakerphone, bluetooth (if capable), or wired headset.

Jun 26, 2009 | Motorola Mobility RAZR V3

1 Answer

Earpiece speaker no longer working


was the phone dropped or had anyone taken it apart?

Jan 13, 2009 | Motorola Mobility RAZR V3

1 Answer

Razr only sound thru speaker


posted by zafaralam on Jul 31, 2008 Report abuse

helo sir
i have one moto v3 there is ear piece problem how to solve this?
postsolution.gif Post Solution addwq.gif Work Queue -->sameproblem.gif Have the same problem? --> Have the same problem? Click Here
X This Problem has been added to the Share Your Expertise Page under "My Work Queue". OK Best Solution posted on Jul 31, 2008 4%20stars.png
noavatar_s.gif
Daelmyth
Rank:guru_s.gif Guru
Rating: 86%, 18 votes
You've either gotten in wet, a small tear in one of the cables, or the speaker itself has gone bad.

I recommend www.wirelesunlimitedinc.com, or www.myspace.com/wirelessunlimited.

They can help with that and they have parts in stock.

Fast turn around and affordable.

Sep 02, 2008 | Motorola Mobility RAZR V3

1 Answer

Moto Razr does not work with speakers off


you need the ear piece cable needs to be replaced.

Jul 18, 2008 | Motorola Mobility RAZR V3

1 Answer

Does not work with speakers off


your ear-piece need to be replaced

Jul 17, 2008 | Motorola Mobility RAZR V3

3 Answers

Cant apply audio file as a ringtone


I'm told the Razr 3a's software won't allow audio files that were transfered to your phone via Bluetooth, for example, to be used as ringtones. I gather they want us to buy them instead.

Jul 04, 2008 | Motorola Mobility RAZR V3

1 Answer

Razr V3 keeps dropping calls


yea if you have verizon atleast dial *228 and press option two when the prompt comes up it will allow you to use the newest tower in your area and shoudl boost your recpetion

Feb 11, 2008 | Motorola Mobility RAZR V3

1 Answer

RAZR V3 Very Low Audio


you need to replace the ear piece cable on the lcd

Dec 31, 2007 | Motorola Mobility RAZR V3m Cellular Phone

1 Answer

Razr v3 problems with the phone locking up, when display lite goes out


okay...what you need to do is take the phone to a mobile service center close to you or a mobile professional technician and have them replace the LCD and the flexcable for you , this would correct the problem with the phone that you are currently having.

Dec 05, 2007 | Motorola Mobility RAZR V3

1 Answer

Motorola Razr V3 speaker doesn't work


The speaker needs to be replaced.THE SPEAKER is located in the bottom section of the phone. You;ll have to remaove the bottom section with a t6 screwdriverand replace the speaker in this section. Sam!

Jun 17, 2007 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

947 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1059 Answers

Lawrence Oravetz

Level 3 Expert

7565 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...