Midi cable wont work with vista

Did the machine come with originally vista os installed or it was xp. Try to re install the driver. Still if it doesnt work, i would suggest that it is wise to send it for a depot repair. Good Luck.

I know this sounds weird, but make sure you connect the MIDI-OUT cable to the MINI-IN port on the keyboard, and the MIDI-IN cable to the MIDI-OUT port. Backwards and illogical, but there it is.. I had the same problem; now it works flawlessly.

On my Vista desktop it worked directly, but I had the same error message on my Vista laptop when the scanner was connected through an USB hub. Perhaps the power is not sufficient?
Then i plugged the connector directly into the laptop usb port 2.0, and the driver was automatically installed and works fine!

change the setting in the settings toolbar

this cable is design to transfer files from xp to vista or vista to vista.
but you can try by installing the software on both the pcs and tranfer the files hope it will work

Did you install the Vista Behringer BCD3000 driver?

see this link

http://www.behringerdownload.de/B-Control_download/BCD3000-Vista-XP-1.2.0.0.zip

Note!

You didn't mention your Vista version. Like 32-bit of 64-bit.
This driver is for the 32-bit! 64-bit is not listed(yet).

HELLO I AM RAVICHANDRAN FROM iRELAND, I BOUGHT THE EEE PC 900 SERIES WINXP, I GB RAM CELERON 900 PROCESSOR. NOW WIDOWS XP IS CORRPTED, WHAT CAN I DO . I HAVE A USB DVD DRIVE. HOW IS BOOT THE BOOTABLE CD. PLEASE DETAILY EXPLAIN ME STEP BY STEP

THANKS

Hello,

I still haven't fixed my MIDI CRISI PROBLEM. I am still looking for solutions in your audience of other web users in this type of MARK OF YHE UNICORN PC MIDI FLYER. I found a an article on the PARELLAL THAT IS USED ON IT. I need all the information I can get to.I was testing this product with the VISTA OS AND HEARD A SOUND-IN PORT, NO SIGNAL. Still need more answers. I Really need the DRIVERS/DOWNLOAD AND THE MANUAL of this product. I am doing at this point freehand.I'll continue to look on your website for help. I prefer the Free Tech Support at this time.


Thank you for notifying me and I will continue to look for help on your web site


KatrinaG
[email protected]

download touch pad driver from internet
giveme your laptop company and model number

Try resetting the device to the default factory settings. Then see if you can get an IP address, either wireless or ethernet, to configure the router through its web interface.