Question about Apple iPhone Smartphone

2 Answers

No service I upgraded my 1st generation I-phone from 1.1.4 to 2.0 firmware version using Quickpwn tool program.The I -phone was pwning and jailbreaking ,too.All the phone's functions(i-pod,wi-fi...etc) are working except the dial-up.I can't make or receive any calls,I haven't any signal and it refers that I have NO SERVICE . Please,if somebody have any clever solutions, he can communicate to bullit77k@hotmail.com or here. Thanx for your time,guys!

Posted by on

2 Answers

Thanx for your effort and your time,guys! I fix the broblem on my own. I downloaded the application "Bootneuter" via Cydia and I unlocked my baseband.

Posted on Sep 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I spend few hours researching this issue. you cannot upgrade to 2.0 and need to restore to 1.1.4 and ziphone 3.0 to jailbreak.

Posted on Sep 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The dvd is asking for a pass code, is there one>


no, That's a firmware issue. You'll have to take it to a Volvo repair shop and have them update the firmware. They should have received a DVD with an update program on it.

Oct 18, 2014 | 2004 Volvo XC90

Tip

Itunes Error 1013/1015


68cc21f.jpg
I think this article is necessary because we are very glad to know how to fix errors in iTunes!

Error 1013/1015:

These are typical errors restore!
They occur when you are restoring to a

firmware lower than pre-exist on your iPhone.

To use iBrickr Nightlife (PC) and Independence (Mac) or the corresponding

version of QuickPwn to firmware restored

Solution iBrick / Independence: here

QuickPwn: here

on Sep 29, 2010 | Cell Phones

1 Answer

I found a iphone and it is locked, and I need to unlock it to use it.


Up until recently, those of us with an iPhone 3G had to use it on the AT&T network. Not anymore! After months of development and research, the guys over at the Dev Team have released the worlds first 3G unlock method. Unlocking will allow use of the iPhone on any network, and also the ability to install 3rd party applications not available via the App Store. This article will walk you through the steps in order to finally free your iPhone.
  1. 1 First, you will need to download the QuickPwn software. It is available in both Windows and Mac formats, and both download links are provided in the resources area of the article below.
  2. Step 2
    Make sure you are running the most current iTunes and iPhonemag-glass_10x10.gif versions. You must have iTunes 8.0.2. You can check what versions your iPhone is running by going to Settings->General->About on your phone and then looking for Version and Modem Firmware listings. The most current version is 2.2 (5G77) and the firmware is 02.28.00. If you do not have these running on your iPhone, the unlock will not work.
  3. Step 3 Create a backup of your iPhone using iTunes.
  4. Step 4
    Launch the QuickPwn program, making sure you have your iPhone on and plugged in via usb. Press the big blue arrow button to continue.
  5. Step 5 Next, QuickPwn will search for the firmware file on your computer. It should be able to find it on its own, so just press the blue button to continue.
  6. Step 6
    Next, QuickPwn will ask you if you want to install Cydia, Installer or to replace boot logos. In order to unlock, you MUST install both Cydia and Installer. Once done, press the blue button.
  7. Step 7 This is the tricky step. And not because its hard – its just so time-sensitive! In order for QuickPwn to begin its magic, the iPhone has to be in “Recovery Mode”. To achieve this, you are going to have to press some buttons! Don’t worry though, QuickPwn will highlight each step, and even count the seconds for you! First, you will hold down the HOME button for 5 seconds (the home button is the circular one on the face of the phone). Once that 5 seconds has passed, you will continue to hold the HOME button down, as well as the POWER button for 10 seconds. The power button is the one on the top of the phone, that you (duh) use to power the phone on and off with. After those 10 seconds go by, keep holding the HOME button down, but release the POWER button. Keep holding the HOME button down until QuickPwn tells you that the process has begun.
  8. Step 8
    Now, sit back, and try not to have a heart attack. QuickPwn will write the modified files to your iPhone, and for the most part, will keep you informed of what it’s doing. You might see some random lines of code on the screen of your iPhone, but it is nothing to be scared of.
  9. Step 9 Once complete, your iPhone will reboot and then be recognized by iTunes. When asked if you want to set this up as a new phone, or restore from a backup, select the backup option. This will allow you to choose the restore point we just made before starting this whole process. The restore process can take a while, so don’t sweat it. This is especially true if you had a ton of music and applications on your iPhone. It took about an hour or so for it to complete mine.
  10. Step 10
    Once complete, look for the Cydia icon on your phone. Open it, and go to the "Sources" section. Click the + at the top of the screen, then type this web address to add the following source: http://apt9.yellowsn0w.com
  11. Step 11 Install the Yellowsn0w program and reboot your iPhone, making sure your with SIM card is inserted. Wait about 90 seconds for carrier lock; if you are still unable to connect, pull the SIM card out and try again

Nov 24, 2009 | Apple iPhone 3G

1 Answer

How do I unblock my iphone 32gb phone


Depending on the firmware, u can use Pawnge tool, or Quickpwn... or even simpler search in google "Iphone 3g "NUMBER OF FIRMWARE" Unlock
And u will get your answer

Oct 30, 2009 | Apple iPhone 3G

3 Answers

2 2 Jailbroken iPhone 3G locked after upgrading can it be unlocke


i am sorry i found a wesite that will possibly help you (www.webcrawler.com/fix_iphone)

i hope it works and please rate me

Mar 16, 2009 | Apple iPhone 3G

1 Answer

IPhone won't do anything!


Before you connect your iPhone or iTouch to iTunes.
Try and put the device into DFU Mode.
Plug your USB cord into your Device and Not into your computer.
Turn the Phone all the way off by holding the power button until the Red Bar appears and Slide it off..
Hold the "Home" Button Down for 5 seconds.
Then Push and Hold the "Power" Button while still holding the "Home" button and count to 7
Let go of the "Power" button while still holding the "Home" Button and Hold the Home button for approx 26 seconds.
The screen may or may not go blank with lines. No Worries!! now plug the USB into the computer with iTunes open. If the iphone is in DFU mode, iTunes will come up with a popup that says, "Itunes has detected an iPhone that is in recovery mode. Your must restore it"
Once this occurs, you can restore your device with any firmware by pressing "SHIFT" on your keyboard and "Clicking" Restore with your Mouse. Restore your device and let it mount to itunes.
If you are unlocking the device, I would suggest using "QuickPwn" you can get it HERE
You can download Apple iPhone Firmware HERE, when using quickpwn you will need to upgrade your firmware to 1,2_ 2.2_5G77...NOT 2.2.1
(TIP: Don't restore your iphone with custom firmware in iTunes. Restore with the original Firmware and Unlock or Jailbreak letting Quickpwn make the custom firmware....Also if you have a 3G do not ungrade in itunes to the 2.2.1 firmware, it changes the phone modem baseband and renders it "NOT" unlockable)

Feb 28, 2009 | Apple iPhone Smartphone

1 Answer

Error 16xx


I would suggest reseotring it once more and trying to use quickpwn again. If it fails you may alternatively want to use Winpwn, it basically does the same thing. 

Winpwn: http://www.winpwn.com/index.php/Main_Page

Feb 18, 2009 | Apple iPhone Smartphone

1 Answer

Iphone hangs


I used quickpwn and took mine to 2.2 and it works fine except for a pairing problem with my jawbone. www.quickpwn.com

Dec 16, 2008 | Apple iPhone Smartphone

1 Answer

IPHONE SHOWING INCORRECT SIM AND ASKING FOR APPROVED SIM


This was attempted on 5.11.2008
Hi I was using ziphone with 1.1.4 firmware and wanted to use Quickpwn 2.1. I restored my Iphone from I tunes by clicking and holding SHIFT then hitting restore in I tunes and after it rebooted it asked me to insert original sim-card. I inserted my pay as you go O2 sim-card, which it was happy with. I went to upgrade to 2.1.1 firmware but it asked me to upgrade to the latest I tunes. After updating I tunes I then uploaded the firmware 2.1.1 I then followed the procedures exactly as explained from QuickPwn, everything worked fine. It came to the end which also unlocked the phone but when putting in the unofficial sim-card, it said “Please insert original sim-card.

Jan 30, 2008 | Computers & Internet

Not finding what you are looking for?
Apple iPhone Smartphone Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Lesley Cameron
Lesley Cameron

Level 3 Expert

371 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you an Apple Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...