Everytime I start printing the first ticket comes out wrong
the first print is spread over 2 tickets and the rest comes out just fine
I also hookd up a eltron lp 2622, and that worked just fine
I think the sensor on the zebra is broken, but that's kinda strange cause only the first print is **** up
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if u have printer at home then it is easy task to print any thing. u jst open file and press alt+p print dialogue box will appear, if u dont have printer then copy that file into flash and go to nearest printing shop
Your problem is related to the size of your Tags.
When the label is fed to be cut, the notch is placed on the sensor. Since there is no paper the value recorded says no paper. Try to recalibrate the sensors or stick a piece of liner on the sensor.
Make sure you're using the website's printer-friendly option when printing the ticket. Look for an option on the webpage (not in the pull-down file menu) that will correctly format the information for printing.
your label length is set incorrectly, there are 2 things it could be 1) your software is telling the printer the label length is longer then the current labels, even if the label size is out my a single millimeter the printer will give you this issue of feed an extra label. you need to change this in your software. you can set a label size smaller then the current label size and it will work correctly
2) you software is not setting a label length and so the printer is going off its internal setting, to recalibrate hold feed and power up the printer letting go after the light starts flashing
it is important to note that label roll will change slightly over time so even though you are ordering the same labels as a year ago the manufacturer will have slight changes from batch to batch