If you have linux, you may have mounted it with the wrong filesystem. Use umount to "unmount" the device, than "man mount" for the flag for filesystem (I think it's -t) and mount it then with "-t vfat" from fat32 or other filesystem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Such errors of NO VIDEO mean: - Memory not inserted correctly: pls remove and insert memory again - Graphics cards possibly moved a bit while you were trying to install the memory: Remove graphics card and insert again.
Another reason could be: Graphics card is brurnt! Perhaps due to touching the chipset with hands full of static electric. If above 2 suggestions do not work, put your graphics card in another PC and check if it works, if not -bad luck- replace it.
ML110 server with System BIOS Version 16 supports a total of eight IPL
devices. Four IPL devices, such as the IDE controller and the floppy
controller, are integrated, leaving support for four additional PCI IPL
devices (i.e., PCI card plugged into PCI expansion slots); however, the
ProLiant ML110 has five PCI expansion slots. Therefore, it is possible
to configure the ProLiant ML110 with five PCI IPL devices (such as SCSI
controllers or NICs) and exceed the limitation of System BIOS Version 16 The
resolution to the problem is to update the System BIOS Version 17 which
supports a total of nine IPL devices and five PCI IPL devices. Update
the ProLiant ML110 server to System BIOS Version 17 i could not include the url for the download because you did not specify the generation of your server but follow this link 1.select your server with the corresponding generation 2. select the operating system 3. from the download list select the bios update to a bootable usb or diskete 4.install the os
Either CPU usage reaches 100% to perform a disk operation or to read the Interrupt.
Check the Event Viewer for Specific Errors. You can verify it using the Task or Process Manager. A Sudden increase of the CPU usage.
Typically servers are configured to allocate the CPU for the Background Services. So it can happen. You should not change it.
The other things is your Mouse interrupts (IRQs) are not compatible with another Device such as a Network card you have. (Most probably a network card)
That is a common issue.
You have to check the compatibility of your Devices.
Scan the System for Spyware.
Clean the mouse connectors.
Try booting into safe mode, getting into device manager, deleting the mouse drivers and rebooting will solve the issue as well. Hope this will help. You can check the IRQs on the web. Please feel free to ask for further help. Please rate the answer as well Thanks for using Fixya!
Hi there again,
I am assuming you are using XP OS.....
I have a couple of questions for you.
With computer on and camera NOT connected,
Please look at my computer,
1.What happens when you connect camera to usb lead then connect the lead to the computers usb port?
2,Would it upset you if we use another way of moving your photo and video files from camera to computer?
3.Does Memory card work in another device or computer?
Solution 1 =================================
If usb did not recongise the camera on the usb port then it will be a software and hardware reinstall ,
Remove usb lead from computer
Go to Add/Remove from you control panel.
Remove the cameras software.reboot.
restart install software first and reboot,
do not connect camera yet,WAIT.
once restarted add camera via usb
should be good to go.....
If it does continue to give you issues then consult the manufactuerer.
Solution 2 =================================
if the usb is connected to the camera via usb lead to usb port on the computer and you can see the cameras' drive info then its more than likely you will be able to open and use this file ,if so you should be able the move these files to your computer too.
Solution 3 =====================================
Explains itself really-Replace it if you need to.
Hope this sorts out your problem.
I beleive your card reader may be poked,
Uninstall and reinstall try again, replace if presists.
these solutions I have put forward have been proven to work in many situations so good luck and let us know the results thanks
Some common reasons for a delayed-write failure are:
1. Problems with a device driver, especially a SCSI or RAID device driver.
Some RAID device drivers are known to issue spurious "Delayed Write
Failed". Most manufacturers have been
alerted to this, so check to make sure the disk drivers are up-to-date.
2. Cabling problems. A faulty or broken cable
-- especially for an external USB or Firewire enclosure—can generate
this error. It can also happen if the cable is too long, or if it is
hooked up through a hub that isn't up to spec. Another possible culprit
is if you have a UDMA drive that requires an 80-pin cable, and you are
using a 40-pin cable.
3. SCSI termination errors. This has become less likely with the advent of self-terminating SCSI hardware, but it shouldn't be counted out.
4. Media errors. This is the worst possible
scenario -- essentially, drive failure. If you can garner statistics on
the drive via SMART (such as SMART & Simple (http://www.beyondlogic.org/solutions/smart/smart.html), you may be able to determine if there's a mechanical failure in the offing. Gibson Research's SpinRite tool (http://grc.com/) is also useful for assessing media errors, but be warned: It may take a long time to do a thorough test.
5. BIOS settings on the computer are forcing faster UDMA modes than the drive controller can handle.
This is unlikely, especially with newer hardware (which can support
UDMA far more flexibly), but it can usually be fixed with a BIOS
upgrade, or by resetting the BIOS entries for the hard drives to
auto-detect settings. Devices set to UDMA Mode 6 that produce this
error, for instance, might need to be set to Mode 5.
6. Controller issues. I've observed that USB
controllers that contend strongly with other hardware can produce this
error. In systems that have both "long" and "short" PCI slots (i.e.,
64-bit and 32-bit), try moving the USB controller to the long slot.
Older PCI cards will not fit in such a slot.
7. Memory parity issues. If the problem
appears after installing new memory, the memory in question may be
faulty or not of the correct type for the motherboard in question.
(This may go hand-in-hand with other problems such as random lockups,
8. The LargeSystemCache Registry tweak and ATI video adapters.
One peculiar set of circumstances that has been observed on multiple
machines with ATI video adapters and more than 512MB of memory involves
the LargeSystemCache Registry setting, a DWORD entry found in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession
This setting governs the amount of memory set aside by the system for
certain kernel processes. If it's set to 1 (which allegedly improves
performance on systems with more than 512MB of memory), it can cause
data corruption on some systems, and produce the "Delayed Write Failed"
error. Try resetting it to 0 if it's been set.
I'm glad to hear your using Linux. It sounds to me like you have bad sectors on your Hard Drive but I can't be sure from what you describe above. I need more info. Is it hda sdb or what? dev What? I'm pretty sure it's a hardware problem. Most of the time a Linux server only goes down if there is a hardware malfunction. dev is a device. The question is what device.