Question about HP DesignJet 450c InkJet Printer

2 Answers

Error lights Steady KLM (i.e. All three lights on the right Cartridges, Data and Media are on). When I press cancel, the lights for Media and Align Media come on. What do I do now?

Posted by on

  • 2 more comments 
  • r2uzenblot Sep 03, 2008

    Exactly the same problem. What is it?????

  • kellyrr87 Oct 24, 2008

    I HAVE THE CARTRIDGES AND DATA LIGHTS FLASHING, WHEN I PRESS CANCEL THE MEDIA LIGHT COMES ON STEADY, IF I PRESS CANCEL AGAIN READY FLASHES....

  • Anonymous Dec 08, 2008

    same as above

  • Anonymous Jan 19, 2009

    All three lights on the right Cartridges, Data and Media are onWhen I press cancel, the lights for Media and Align Media come on. What do I do now?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

All three lights on the right Cartridges, Data and Media are on). When I press cancel, the lights for Media and Align Media come on. What do I do now?

Posted on Jan 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 67 Answers

Lights are explained in the owners manual. Google HP 450 owners manual if you don't have yours. Various lights can be everything from change the ink to close the cover to Oh Oh, you're in trouble!

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have changed one of the cartridges(colored one) in my canon mp450,after inserting it,the printer flashed U140 saying that the ink cartridge cannot be recognized. what shall i do to correct this...


Hi there, Try the following. Remove all the cartridges. Then switch Printer off.. Wait a minute or 2 then switch printer on again and install the cartridges again. Also make sure that on the cartridges the little golden contacts are clean.
If that didn't work try doing the following. It will reset your printer.
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data

Jul 29, 2011 | Printers & Copiers

3 Answers

My HP Officejet 4500 keeps telling my to align my printer cartridges and I have done it several times. After I align them and print something it requires me to align them again.


Try removing the cartridges, closing the printer, and disconnect the power. Let sit for at least 10 minutes, then hook up the power, wait until it stops making noises, the reinstall the cartridges, black first, then color, and if the alignment comes up again, press cancel. This should remove the error.

Sep 30, 2010 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Reset To551 ink cartridges


Hi,

  • Power off the printer
  • Hold the stop/reset button then press and hold power (for 5 secs)
  • Hold Power and release the stop/reset button
  • Press the stop/reset button twice
  • Relase power button
  • Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
  • On the 3rd press the inicator should be orange.
  • Press the power button to set data
  • To set data remove cartridges then replace.
  • leave for 20 or 30 secs
  • Press the power button again to shut down
  • Then press power button to power up.
  • The printer will feed one piece of paper through
  • then set language and counrty.
  • Then ink should be reset
Please rate my sesponse!!
Thanks, SF

Jan 28, 2010 | Printers & Copiers

1 Answer

I get a message error that ink cartridge is not well installed


Remove all the cartridges then back again installed..if the orange light is always blinking.long press the cancel botton til the green light is steady..ok..

Jan 03, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Keep getting message Press Enter to Align Cartridges


after each alignment you press enter key or start key not cancel key,

Dec 12, 2008 | HP PSC 2175 All-In-One InkJet Printer

2 Answers

Refilled, full ink cartridges, but...


To Reset the Canon Cartridges Works 100%
Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Relase power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the inicator should be orange.
Press the power button to set data
To set data remove cartridges then replace.
leave for 20 or 30 secs
Press the power button again to shut down
Then press power button to power up.
The printer will feed one piece of paper through
then set language and counrty.
Then ink should be reset

Aug 17, 2008 | Canon MX300 Office All-In-One Printer

1 Answer

Problem with plotter


Are the lights flashing? If they are flashing it is a system error, if they are on steady it is a recoverable error. When you push cancel is the media light the only one or is align media or ready on as well?

Aug 11, 2008 | HP DesignJet 450c InkJet Printer

1 Answer

Hp2170 all in one


error message on saying remove and check cartridges , was working fine yesterday and nothing has been changed

Apr 17, 2008 | Printers & Copiers

Not finding what you are looking for?
HP DesignJet 450c InkJet Printer Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...