Question about Projection Televisions

Open Question


Posted by on

  • gileo13 Sep 21, 2008

    Need Wharfedale ctv 1428 service menu code


1 Suggested Answer

  • 2 Answers

SOURCE: I am after a wharfedale

i found a code for my wafdale lcd tv model L32TA6A = 0206

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


To make a factory reset, you have to enter its service mode option. If you wish to get more details about how to enter and exit service mode options, and how to make adjustments to it, check this link. It has details. You can see details about, how to reset it. Never forget to exit the service mode after adjustments. Never do any unnecessary changes to data value set there. It might make set tampered. Pull up older posts there, either by its left side bar, or see it in Timslide option.

Jun 24, 2013 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

Does the TH-42PZ70BA have the scrolling bar option to get rid of screen burn?

You're asking about how t enter the burn in mode, I assumes. To access it, you have to enter its service mode. Check the link given here. It has details about how to enter service mode to many brand televisions and others. Detail can be get. Pull up older posts there by its left side bar, or do a search by the brand name.

Jun 04, 2013 | Projection Televisions

1 Answer

Pioneer plasma elite pro-504pu how do reset to factory mode on standby mode >??

u cam reset ur only by the following way.

p { margin-bottom: 0.21cm; }

In order to enter Service Mode, TV guide must be turned off

In order to do this procedure you must have and use the correct remote. The full function remote that

came with the set has a TV Guide Logo in a red box. This is the remote you should use.

NOTE: If TV guide has not yet been setup, then the 1st step is to follow instructions to set TV guide up.

Enter ZIP code, cable or ant. Etc. and release the "TV Guide". TV guide will appear on the screen.

2.Navigate to the TV Guide tool bar and use the ">" button to select "setup" in the menu and press

and release the "enter" button

3.use the "arrow down" button to select "default options" and release the "enter" button and select "general defaults" and release the "enter" button (opens menu on lower left side)

6. use the "arrow down" button to select "auto guide"

7. use the ">" button to select "off"

8. use the "arrow down" button to select "done"

9. press and release the "enter"

10. press and release the "TV Guide" button to turn the display off

System Reset Using Service Mode:

1. Enter Service Mode

2. Use the "muting" button to select "initialize" screen

3. While on the "initialize" screen

4. Use the "down arrow" button to select "final setup"

5. Press and release the "enter" button to select "data reset"

6. Use the ">" button on the remote to select "yes"

7. Press and hold the "enter" button until the screen goes black release "enter" button on remote.

8. Power the unit off using the remote control

9. Unplug the power cord from the media receiver to complete the reset

10. Plug in the media receiver; turn the system on and reset is complete.


Jan 11, 2011 | Pioneer Projection Televisions

1 Answer

How do i reset lamp timer Model #HL-S4676-SX/XAA Samsug tv

Using the original remote, while the unit is off hit the Mute key then push 182 then the power button, this will take you into the service mode, use arrow keys to scroll down to different options and push enter, do this until you see lamp reset push enter to reset, then turn power off to exit service mode.. Do not mess with any other settings in this mode.

Jan 21, 2010 | Projection Televisions

1 Answer

Service menu

How to Enter Service Mode
1. Turn on the main power switch to place this set in standby
mode. (LED will light in red.)
2. Press the buttons on the commander as follows, and enter
service mode.

PRESS these buttons in sequence


Method of Cancellation from Service Mode
1. Set the standby mode (Press “ (TV STANDBY)” button
on the commander), then press “ (TV STANDBY)” button
again, hereupon it becomes TV mode.


Oct 29, 2008 | Sony KP-53HS30 53" Rear Projection...

1 Answer

Need to enter service mode on RCA P60752EB LG1

Here is a procedure to enter in Service Mode of RCA TV.
Another procedure is appended below.

NOTE: It is strongly advised to Be Care Full while changing data in Service Mode.

Oct 03, 2008 | Projection Televisions

1 Answer

Service mode

what do you need to do in the service mode?

Feb 02, 2008 | Projection Televisions

1 Answer

Service Mode

JustinMan, if you use original IC`s (not the el-cheapo chinese copies) the odds are good you will need no or minor adjustments which don`t require the need to go into service mode which you really shouldn`t go into unless your experienced with tv repair, you should be able to order the serv. manual here, it will give you the parts list and set-up procedure, good luck, BMW Rider

Dec 28, 2007 | Toshiba 50HX70 50" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers


Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides