Question about NEC Projection Televisions

1 Answer

I have just purchased a nec px-42vr5g plasma monitor and intend to use it as a tv connected to my sky plus, dvd and wii the guy i bought it from cant find the manual it has lots of sockets etc whats the best way to connect it, he had a scart to vga cable and only used the 1 vga plug (as it has no speakers) Any help would be fantastic Thanks in advance

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi,

Get the Wii "COMPONENT" cable set. This set has white-red (sound) connectors plus the red-green-blue (component - video) connectors. You can get this cable where they sell the Wii. It will give you the best possible picture with this device.

Plug the Red-Green-Blue connector in their respective sockets on the NEC display (upeer right-hand side). Switch the NEC display to the DTV/HD input (upper right button on the remote).

Please note that this setup does not provide sound since the display does not have speakers.
Use the white-red connectors and plug them into your amplifier or other sound device.

Good luck.

Posted on Jun 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NEC PX 42XM1A won't power on


Any chance you might think that it is your remote control faulty? As you need it to turn your plasma on from standby via remote (only). Let me know.

Apr 23, 2009 | Projection Televisions

2 Answers

I have a plasma display panel ppm42s3q which i use to recive sky and watch dvds. the picture on dvd is spot on however when i move to sky the brightness is too strong; especially on peoples faces. have...


Have you tried adjusting the contrast within the sky menu.
go to services and alter the settings from there, maybe change the outout from rgb to cyan/red/green.

Mar 26, 2008 | Projection Televisions

1 Answer

NEC px-42vp4g/s 42in.plasma monitor PDP:np42b3mf01...


Hello,
I have the same problem with vertical coloured lines on my NEC PX-42VP4G/S. The photo only shows a black background just so it's easier to see the lines in the photo but normally the picture is OK except for the vertical lines which aren't always in the same place.
If anyone can advise on exactly what I need to replace then I would be very grateful.
Regards, Simon.
_1559.jpg

Apr 17, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Just bought a samsung ps50a557s3f 50" plasma tv and the picture isnt very good.Have only got normal sky at the moment and i was wondering what the best settings are


Hi Smudger

Not sure if you still have this issue, but i have just bought this TV & also use sky (not + or HD)...

I got myself a Monster Cable Home Theatre surge protection unit from comet, basically it helps filter out all the background interference (picture & sound) & helps boost the signal sent to the TV..

I use a gold plated scart lead from the sky box to the TV & the picture is spot on.......i've not noticed any ghosting/pixeling etc & am well impressed...

The unit came with a top end HDMI cable & cost £135 (bit excessive you may think, but to buy the unit & cable seperate would cost £250!!) + the cable is a 'cable for life', so you can get a free updated cable as technology progresses :-)

My sky signal was always at half power (you can view this from the sky menu options) & now its almost full signal

Oct 06, 2008 | Samsung Projection Televisions

1 Answer

I just bought a samsung ps42a457p1d 42" plasma tv.watching football is a nightmare.it is very blurry when watching through sky and also bbc1.we have checked scart leads(they worked fine on our old...


It's under warranty. The convergence might be off but you deserve to have the thing looking right. If they can't fix it tell them to take it back and you're going across the street for better service...

It should be a great picture but something is wrong. I would hope they offer you onsite assistance if not I would want to talk to a company rep. Samsung has a pretty good following in terms of their products but I think something is wrong with your TV. Call them. Tell them you want a replacement. Tell them that and stand by it. Hopefully they will give you support or at least have someone come look at it on their nickel. and maybe they will be nice and make you very happy. That's my hope.

Sep 24, 2008 | Samsung Projection Televisions

1 Answer

Hooked up my new aquos and cant get the cable to work, my wii comes on , my dvd player too, but the Direct Tv screen is just blank


How is the cable connected to the TV. Is it direct into the back of the TV or through one of the connections like say the wii? Did it work before with the way it is connected?

Aug 18, 2008 | Projection Televisions

1 Answer

I need a Remote for NEC Plasma TV Model PX-50VP2G


www.replacementremotes.com should have the remote. Just enter the model number of your set in the search box

Apr 01, 2008 | Projection Televisions

1 Answer

Yamaha DSPAX761 no s-video to HDMI


S-Video and Composite are analogue and HDMI is digital. Your receiver dose not have the capability to convert from analogue to digital and hence you are not not getting any video.

Feb 28, 2008 | Projection Televisions

1 Answer

Connecting TV-DVD recorder-Sky plus


scart from the sky to the dvd recorder. then a scart from each to the tv. Job done.

Jan 18, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61195 Answers

Are you a NEC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...