Question about Dell PowerEdge 1600SC Server

1 Answer

Dell PowerEdge 1600SC Server problem

Hi,

I have a Dell PowerEdge 1600SC Server. Yesterday I found that server is not responding (Hanged). I restarted it by RESTART button on front pannel, on booting it shows "memmory has been changed" cheked all devices connected and after two minutes it shutdowns. I again start it and now it boots perfectly with no error but after two-three minutes it shutdowns again.
What could be the problem?

Posted by on

  • mani_mani Sep 08, 2008

    Thanks Coss.



    I fixed the problem. I cleaned the entire motherboard and memmory sockets with IPA. Reassembled the server and now it is up.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Dell Master
  • 1,050 Answers

I had the same thing happen in a 600SC about a month ago.
Replaced the memory, and it fixed the problem.

It did the same hang. Would run fine for any where from a hour to 3 hours, and then quit (hang). And I got the same message. Talk to them and it was a short in the memory module, so some times it would read the entire stick, other times it would "not see it", and that would lock the OS.

Posted on Sep 06, 2008

  • Coss Sep 08, 2008

    Great!

    Glad it was a simple fix for you.

    The one I had go bad was 430 miles away. Made my fix a little longer.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When powering up a Poweredge 1600sc i get 6 error beeps,the order is 1-3-2


Hi,
It states 1-3-2 = No memory installed
Remove and reset the memory modules (see "Memory Modules"). If the problem persists, replace the system board (see "System Board"). Good Luck

Jan 29, 2010 | Dell PowerEdge 1600SC Server

1 Answer

PowerEdge 1600SC long beep and hang


check the Cmos battery. or levae pluged in over night and then check setup setting you battery went dead

Oct 12, 2009 | Dell PowerEdge 1600SC Server

1 Answer

Dell PowerEdege 1600SC not recognizing IO devices


Just go into the bios and insert the correct parameters. you shut it off before it could save the settings. Or hit fi on boot and it should take you into the bios and you cand sort it out in there. If you want an easy way, just do a system restore. Start,Programs, accesorys, system tools, system restore, just go back a day or two before you had that issue, and you should be good to go, good luck

Apr 12, 2009 | Dell PowerEdge 1600SC Server

1 Answer

Hard disc Problem for server (powerEdge 1600SC)


Hi , I suppose its a issue with the RAM , Kindly check re-inserting the RAM on the server and try booting the system

Jan 14, 2009 | Dell PowerEdge 1600SC Server

2 Answers

Boot from CD is not recognizing the Windows 2003 Server CD


hv u tried booting from other CDs .
if u can boot from other CDs , then this 2003 CD is botched , change it.

Jan 05, 2009 | Dell PowerEdge 1600SC Server

1 Answer

My Dell powerEdge 1600SC Server Fail.....


Sounds like you're running Windows Server 2003 and want to run a backup utility.

Fortunately, this OS ships with a built-in backup utility called we call "ntbackup."

You can launch this program from Start -> Run, or you can find it in Start -> Accessories -> System Tools -> Backup.

Jan 03, 2009 | Dell PowerEdge 1600SC Server

2 Answers

Dell PowerEdge 1600sc server is running


What operating system is the server using? What roles is the server doing (DNS/DHCP/DC/Exchange/etc). If it's a Windows 2003 SBS box, you're supposed to be able to run upto about 75 users. I would never run more than 30 users on an SBS box (and it'd have to be a very high spec). You may consdier bringing another server to do an aditional role (file/print) and leave the primary to be an SBS box

Oct 10, 2008 | Dell PowerEdge 1600SC Server

Not finding what you are looking for?
Dell PowerEdge 1600SC Server Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...