Question about NEC MobilePro 900 Handheld

1 Answer

When should I replace my backup battery?

I am receiving the error message “Backup Battery Very Low – Your back up battery is very low or missing. Data loss may result from failure to replace the battery very soon. Consult the manufacturer’s instructions for directions on replacing or charging the backup battery.” What should I do?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 903 Answers

The back up battery should be replaced immediately upon seeing the message "Backup Battery Very Low - Your back up battery is very low or missing. Data loss may result from failure to replace the battery very soon. Consult the manufacturer's instructions for directions on replacing or charging the backup battery." Warning: It is important to note that the back up battery in the MobilePro 900 is not rechargeable, thus, to prevent data loss, it is important to change the back up battery immediately when this message is displayed.

Posted on Sep 14, 2005

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 903 Answers

SOURCE: Error message "Backup Battery Very Low"

The MobilePro 900 back up battery is low and should be replaced. The battery is a CR2032 coin-cell battery, which is very common and can be purchased at most department and drug stores. Refer to section 1-7 of the "MobilePro 900 Handheld PC's User's Guide" for detailed replacement instructions.

Posted on Sep 14, 2005

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low battery and Phone communication failure


Check that you are not using an app that is continuously accessing the internet and communicating with a server for some reason that is using the phones WiFi or mobile channel. This will drain battery life if incorrectly configured etc ( i.e selecting access to your location, services and other info )

Apr 02, 2017 | GE Security Simon 3 Wireless Home Security...

1 Answer

APX alarm system reads low battery,what do we do?


The backup battery that help the system keypad/receiver unit to operate it is low in power and it is dying and in need of a new battery replacement.Traced the system back where main junktion and overide to the system box unit is should have the battery there.This battery really easy to do a replacement.The battery it is like a similar to a motor cycle battery.

Jul 21, 2011 | Honeywell Ademco/ Honeywell 6150rf Apx...

1 Answer

MC1000 scannerBackup battery very low


You must disasemble de unit. There is a Ni-Mh 3.6v 15mAh batery inside at the bottom of the unit.

Apr 26, 2010 | Symbol MC1000 Barcode Scanner

3 Answers

Battery backup is too low..


This may happens sometime with charger ,as i have the same problem and i replace the charger---i shown the mbile HTC authorised center

Aug 05, 2009 | HTC Touch P3450 Smartphone

1 Answer

How do I prevent loosing data when my battery discharges


Hi. Actually, on pocket pcs there's a backup battery onboard, but in your case maybe backup battery is dead. So you can have that changed or you can charge your PDA on regular basis. Hope this helps.

Jun 28, 2009 | Toshiba e355 Pocket PC

1 Answer

Backup battery is not charging not visible.backup battery none


hi thanks for using fixya!

I recommed that you bring your Imate PDA to a service technician to check further the error. It is not a good sign, especially if there is a problem with the back up battery.

Regards!

May 24, 2009 | i-mate JAM Pocket PC

1 Answer

I'm getting a message - backup battery very low etc -


you can buy a Backup battery for the axim X3 series on Ebay for about 17.00 that includes shipping. best price Ive seen

Dec 05, 2008 | Dell Axim X3 Pocket PC

1 Answer

Low Battery DATA Lose - HP iPAQ Model h5450 Packet PC


The h5450 comes with what HP calls a backup battery. It is built into the device and not accessible by the user. However, the backup battery has only enough juice to power the Pocket PC for a few minutes while you change main batteries. Don't expect it to keep your RAM data alive if the main battery runs out.

Mar 12, 2008 | RIM BlackBerry Pearl 8100

1 Answer

Error message "Backup Battery Very Low"


The MobilePro 900 back up battery is low and should be replaced. The battery is a CR2032 coin-cell battery, which is very common and can be purchased at most department and drug stores. Refer to section 1-7 of the "MobilePro 900 Handheld PC's User's Guide" for detailed replacement instructions.

Sep 14, 2005 | NEC MobilePro 900 Handheld

1 Answer

"Backup Battery Very Low"


NEC has identified an issue where the system can erroneously generate the "Backup Battery Very Low" message. There are two possible solutions that will eliminate this erroneous low battery warning message (the first method is the preferred solution, the second method can be used if the update file is not available). Solution I. Install a new version of the driver that controls the battery monitoring circuit. 1. Download the Low battery warning fix to your desktop. 2. Using ActiveSync or a compact Flash Card, copy FixBatt_HPC2K.EXE to the MobilePro internal disk. 3. On the MobilePro, double click the FixBatt_HPC2K icon. 4. When the message "Low Backup Battery Issue" is displayed, tap the "Patch it" button 5. When prompted turn unit over and momentarily depress the Reset button using the stylus. Solution II. Change the default power management configuration. Configure your MobilePro 900 to suspend when the LCD lid is closed on battery power and AC power. To ensure that the device suspends whenever the lid is closed, please make the following changes and perform a soft reset: 1. Go to Control Panel. 2. Open MobilePro Settings. 3. Go to the LCD Suspend/Resume tab. 4. Place a check next to "Enable suspend while on External Power." 5. Click the "Advanced" button and place a check next to "Enable suspend while on External power. 6. Click OK to close the Advanced Setting window and click OK to close the MobilePro Settings. 7. Turn unit over and momentarily depress the Reset button using the stylus. NOTE: Both the software update and power management settings are cleared on a hard reset and must be re-applied.

Sep 14, 2005 | NEC MobilePro 900 Handheld

Not finding what you are looking for?
NEC MobilePro 900 Handheld Logo

Related Topics:

1,631 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

parusdi rusdi

Level 1 Expert

3 Answers

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...