Question about Magic (ED8000) Professional Microphone

2 Answers

Need local repair in Los Angeles for MagicSinging Model#ED-9000

When wand is turned on.. there is no power ., possible bad AC adapter or
short in possible cord.. Can you recommend a warranty station or repair site in the Los Angeles area ...Please e-mail me at JimmyLee@aceweb.com

Thanks so Much!

Posted by on

  • martan267 Dec 02, 2008

    I have the same problem with a Koritech HandyStar 2004. I need to find out how I can get a replacement RCA cable/power connection cord.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I bought an et18000k enter tech magic sing on the internet Aug. last year and this item stop working May this year, not even a year. The music is distorted, like a broken record, out of tune, cant even understand what music is playing. I change the batteries, did all the trouble shooting listed, everything not working ..and I realize that the company where i bought this piece is from the Philippines, so rather ship there that is very expensive, is there an easier solution to repair for this, do know any service center along West Covina, CA. or Los angeles area

Posted on Aug 16, 2011

  • te__4787 Aug 20, 2011

    Hello Sean, the system is working, i could hear my voice, ther is a signal, but the problem is the music comng out is distorted, like broken slipping record,and cant understand what song is playing... The system has still a year warranty from wow video karaoke in the Philippines but i dont wanna send it there spending too much money for just the shipping and waiting too long to be fix. Can you fix it, where is your shop so i could bring it t you and test it, thanks.

×

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 18 Answers

Are you getting a green flashing light or none at all..
if green flashing light then it is the mic signal, if none at all, then it is the transceiver inside. contact me sean.delcarmen@magicmic.com

Posted on Mar 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there no power on the mic?


try putting fresh batteries, but disconnecting the ac adapter temporarily. If power is intermittent, the power button could be internally dirty. I normally open it up to clean the plastic buttons.

Mar 29, 2016 | Magic Entertech ED-9000 Mic Sing Along...

13 Answers

Won't turn on


I know it sounds silly, but have you replaced the batteries? Do you have your receipt still? Maybe it is still under a warranty of some sort? As for that dealer, maybe he could let you exchange it if you have a receipt?

Sep 03, 2008 | Magic Sing Along Consumer Microphone

1 Answer

I lost the power adapter for microphone Leadsinger LS-3700W


I found a power adapter at the local thrift shop for $1.99.
not the original one but it works fine.
AC adapter Input:120VAC OUTPUT: 9VDC.
good luck..

Oct 31, 2013 | LeadSinger Microphones

1 Answer

Well the ac adapter still works and the mic does too but i accedently put the wrong ac adapter to the system that had a higher voltage and i think i blew it out also it stinks like burn plastic were their...


Hi
Electronic equipments dont work with ac supplies. That the fact is they need d.c. and in your case a.c. power goes through rectification and regulation in which case by feeding over voltage into your system you have probably damaged rectifier diodes and the regulator and these items are very cheap.N.B. if you are going to do the repair yourself check for burnt and melted copper tracks.

Jun 30, 2011 | Magic (ED8000) Professional Microphone

1 Answer

Shorted out AC on Shure T4A receiver, need schematics


You can get the repair manuals/schematics by emailing Shure at service@shure.com

May 09, 2010 | Shure T4A DIVERSITY AC RECEIVER (CV) T4ACV...

1 Answer

Shorted out AC on Shure T4A receiver, need schematics


Repair manuals and schematics can be obtained from the Shure service department by writing to serviceweb@shure.com

Mar 17, 2010 | Shure T4A DIVERSITY AC RECEIVER (CV) T4ACV...

1 Answer

ED-9000 freezes


try removing the song chip( if your using one)
test the mic with its built in songs...
if it works- then the problem is on the song chip- try cleaning it......

customerservice@magicmic.com

Jan 01, 2009 | Magic Sing Along Consumer Microphone

1 Answer

ED 9000 picture problem


I hope you have configured the MIC for NTSC. By default it comes configured for PAL (Indian TV standard). The manual explains how to do it.

Feb 23, 2008 | Magic Entertech ED-9000 Mic Sing Along...

1 Answer

Not working Magic Sing ED 8000


its better for you to bring to electronics technician.maybe only ur ac adaptor was burn.

Jan 04, 2008 | Portacom Porta-Com COM-60FC 6 Headset...

2 Answers

Entertech mic ed-9000--Mic stopped working


Could be the wiring in the RCA cable.
Swinging mike to and fro can wear through the power wiring inside the cable.
I'm on my 3rd cable.
Manufacturers have said they recognise this is a common fault with product but it seems they are not taking any steps to rectify.
I found that using the mike with batteries sometimes works.
If you get a new cable may be a good idea to reinforce the top 12 - 18 inches of the cable to avoid same problem in future.

Nov 16, 2007 | Magic (ED8000) Professional Microphone

Not finding what you are looking for?
Magic (ED8000) Professional Microphone Logo

567 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Microphones Experts

Barbat Nae
Barbat Nae

Level 3 Expert

508 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

411 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Magic Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...