GE Oven Model # JRS04B0W3BB is showing an F7 code, how do I fix it? I can stop the beeping noise by pushing the stop button, but the beeping returns after about 30 minutes. I have pulled the breaker for days at a time, then tried the oven again, and the F7 code returns.

Hello,

The F7 error code means that a function key on the touchpad is shorted or stuck, the F7 can be cleared by pushing the clear/off button,if the error code returns the touchpad would need to be replaced.


GENE

Hello,

The F7 error code means that a key on the touchpad has shorted and the touchpad needs to be replaced... sometimes it's a electronic anaomily, since you have pushed Clear/off and the F7 returns it surly means that touchpad is bad.


GENE

Hello,

The F7 error code means that a button on the touch pad is bad,you can clear the error code by the pushing clear/cancel button if it doesn't reoccur all is well. If it returns (what i have heard from my customers is that it always reoccurs in the middle of the night when their fast asleep) the touch will need to be replaced

I hope this helps ,if it does please give me a 4 thumbs up rating

Gene

Hi

You don't say what type of GE oven this is so I will advise the following;

On a GE range oven F7 indicates either a function pad button is stuck or the clock on the oven is malfunctioning

On the 99 Range oven F7 indicates a shorted Clear/Off Key due to membrane switch or a shorted control or connector

On the GE XL44 Self Clean Oven F7 is Stuck keypad or control relay malfunction

Hope this helps. Please remember to rate my answer. Thank you.

F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

from repairclinic.com:

F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)
It looks like you have a function button pad stuck or a bad clock.

Unstick button or replace electronic range control.

F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

HI, if this error code cannot be canceled, this will confirm a touch pad issue. the membrane is damaged and, this will require you to replace the ERC.

Replacing the Electronic oven control will fix this issue.

A function pad is probably stuck.
Push all buttons several times each. Often this will clear a stuck pad.
If that does not work replace the clock.