Question about Invicta Speedway Collection Grand Chronograph Gold Tone #4220 Watch for Men

1 Answer

Invicta Gran Speedway CG second Hand reset

The second hand on my grand speedway stops at 58 no 60 can you tell me the sequence I need to go through to reset it to 60?

Posted by on

  • 1 more comment 
  • goldfieldgus Sep 03, 2008

    No I do not. I found the manule for this watch on line. I followed the directions and reset the CG second hand by pulling the crown to the #2 position and pushed the two pushers at the same time for 2 seconds. I then pushed pusher #1 and each time I pushed it it moved the second hand one second. When the second hand was at 60 I stopped and pushed the crown in. Problem solved. This site is worthless!

  • Anonymous Nov 05, 2008

    Thanks for the solution goldfieldgus! I'm aligned again... and I didn't have to have it "repaired"... idiots.

  • Anonymous Mar 28, 2014

    Only worn for a day. Three weeks old.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

Good after noon ! the hand of your watch is need to aline , so you need to go to the watc repairman,thank you! god bless !

Posted on Sep 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set date


Usually you pull the time adjust out and keep spinning till you get the correct date in the window

Jul 25, 2014 | Invicta Speedway Collection Grand...

1 Answer

Hi there, I have recenlty purchased the Invicta 9223, however, I cant get the second hand to swoop. Is there any chance you may know why please? I have read the manual inside and out... Thank...


If you have pressed the 2:00 push button, and the chronograph hand has not started, the movement is defective.

You should return the timepiece directly to the seller in exchange for another. If they are an authorized dealer, you may return it directly to Invicta with your warranty, and they will provide the repair / replacement directly.

Again, there is nothing that you are doing wrong, the movement itself is defective. We see this in a small percentage of watches, but often enough. Do not take no for an answer from the seller if you have just purchased this defective item, especially if they are not an authorized reseller / dealer of this brand.

Feb 23, 2011 | Invicta Speedway 9223 Wrist Watch

2 Answers

Invicta Speedway 9223 not keeping time


It sounds to me as it is a quartz chronograph and it is right that the centre seconds hand moves only if the pushbutton is pressed. If you look close enough, you will notice that the small subdial finger is ticking and counting seconds. It is recommended to replace battery, as sometimes watches been laying in stores for a few years before selling and the battery is flat or underpowered.
Want to know more about your watch? Go to www.invictawatches.com and find out.

Regards

Arthur

Dec 16, 2008 | Invicta Speedway 9223 Wrist Watch

1 Answer

I have an Invicta 5103 mechanical wind chrono and the large second hand will not zero out on the 12


To set the sweep arm pull the stem and crown out to the first or second set position then press and hold down the start button. The sweep arm will move into position and you can let go of the button when it is where you want it.

Dec 02, 2008 | Invicta Dive/Sport - SPEEDWAY CHRONOGRAPH...

2 Answers

How do i change second hand


I have a Fossil Speedway watch (FS2895). The second hand was on the 2, and I wanted it on the 12. Like the above suggestion says, pull out the winder twice as if you are going to reset the time. However, leave the winder alone after that and, instead, press and hold the chronograph start/stop button (above the winder) until the second hand reaches the desired position. If you want to move the hand a small bit at a time, just press and release that same button until the hand reaches the desired position.

Apr 02, 2008 | Watches

Not finding what you are looking for?
Invicta Speedway Collection Grand Chronograph Gold Tone #4220 Watch for Men Logo

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Invicta Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Jimmy Accardi

Level 2 Expert

98 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you an Invicta Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...