Question about Bosch Nexxt Premium WFMC6400UC Front Load Washer

1 Answer

Help! My Bosch Nexxt washer has issues.

My book says the model number, etc. is on the left when the door is open. But it isn't. I have looked at the net and don't see a control panel that looks like mine.

Where do I look for this information on my washer? The problem with my washer is it will start, fill with water, run and then stop. The light for door lock is still on but the door isn't locked.

I have 4 children under the age of 11. I need my washer. Please help. Thanx!

Posted by on

  • maltadvocate Jan 02, 2009

    I have a Bosch WFMC2100UC with the same problem. Washer starts the cycle, agitates for a short period, then unlocks the door and stops. The "lock" light on the control panel is illuminated, but the door isn't locked. There are no error codes, just a time display.  I've cleaned the drain trap with no luck.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 223 Answers

Will your machine pump out water? If it does it sounds like a faulty module. Try this website: www.bshappliancecare.com I think it identifies the model number by another code on the washing machine so you should be able to at least positively identify what unit you have. Good luck.

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing a gasket on a bosch nexxt washer


For parts look in Fixya. For changing go to YouTube, great videos to show you how.

Click helped, if helped.

Mar 14, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Bosch Nexxt Washer Error Code E01


means that the computer is seeing the door as opened even though it may be closed, you can fix this by following this guide:

Bosch Front Load Washer Error E01

Dec 01, 2012 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Bosch Nexxt 100 series washer stops at 1st spin cycle


take a look at your manual that came with your machine go to problems usually at the back and see what that says,or go to the bosch website and type in your model number its on the inside of the door.i would suspect a program fault.adrian,,,,,

Jun 28, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Looking for part number of the Transit/transport Bolts


Hi


Thanks for using FixYa. Please check these links for the parts of your Bosch washer:


Bosch WFMC3301UC Parts

Bosch WFMC3301UC Parts-2


Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 14, 2010 | Bosch Nexxt 500 WFMC3301 Front Load Washer

4 Answers

Error code E:01


Hi and welcome to Fixya, The E01 error for your bosch indicates a door lock problem has been detected at the control board. Insure the door is closed tight, turn your breaker off or unplug the washer for a couple of minutes and retry. Let me know what happens, ultimately it may be a faulty lock assembly, a loose wire harness etc. but we'll cross that bridge when we get there...if necessary. I'll watch for you to respond with the result's. Good luck. Macmarkus :)

Jun 07, 2010 | Bosch Nexxt 500 WFMC3301 Front Load Washer

3 Answers

Mold inside the rubber seal as well as inside the glass in the door. Clothes are not fresh. I have to keep the door open due to the smell.


Bosch Nexxt Premium WFMC6400UC Front Load Washer mould on rubber seal.
This video will show you how to change a door seal on this Bosch front loader washing machine.
we have all bosch repairs in our channel.

Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.

Nov 18, 2009 | Bosch Nexxt Premium WFMC6400UC Front Load...

2 Answers

Bosch nexxt washer fabric softener not draining


is there a drain on the bottom left corner if so drain the contents its usually under a small panel

Sep 14, 2009 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

500 WFMC3301 Bosch Front Loader


The door for this model of washing machine cannot be changed to open from the left.

Jul 07, 2008 | Bosch Nexxt 500 WFMC3301 Front Load Washer

Not finding what you are looking for?
Bosch Nexxt Premium WFMC6400UC Front Load Washer Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...