Erroro code f6e6 what is problem? what is solution?

We bought this oven too for our newly renovated home, we used it for six days before it failed due to an electronic error (F6E6: Appliance Manager 1 Board Communication). After a failed warranty repair attempt and multiple phone calls/complaints we eventually got Whirlpool to agree to give us a new oven. We had to wait six MONTHS for this new oven to arrive due to it being out of manufacture. Our second oven arrived and worked for 8 weeks until this weekend, it failed again with an F6E6 error! Now to try and get it repaired replaced!

There is obviously something wrong with the electronic design or poor-quality components are being used. We strongly recommend you do not buy this oven.

We bought a matching combi oven from the same range which means we have to stick with this oven or we will end up with ovens that don't match in a brand new kitchen!

You posted to the 'Ovens' category. I can find nothing on 'temper codes' or even 'tAmper codes'. Please always include FULL

make model (what it is) in all questions

Perhaps it is an alarm system? We have that category as well.

https://www.google.com/search?q=Keypad+needs+tamper+code

..

Possible Solutions

Reset power to the product:

There may be a problem with the Oven Appliance Manger Control or the associated wiring.

• Power unit down by turning off the circuit breaker(s) for one (1) minute.
• Power unit up by turning on the circuit breaker(s).
• Monitor the oven for one (1) minute to ensure the error code does not display again.
• Verify oven operation.

Still need help? Call or schedule service.

rcr311w codes Washing Machines Questions & Answers ...

www.fixya.com > Forum > Tags > rcr311w codes
Zita http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3308-bosch-wae-range-washing-machine-fault-codes.html here is one link to error .

Although fault code "F6E6" most often indicates a communication failure between the User Interface and Appliance Manager board (Service Pointer W10538518), it could also indicate an incorrect electrical connection at the customer's home junction box. Sounds like you have some wires crossed!

Factory Code settings 1234, To change the factory code press button 1 for 2 seconds, wait for 2 beeps, now enter your new 4 digit code, you will hear a further 2 beeps to confirm the new code. If the battery is removed the code will revert to the preset code(1234)

I FORGOT MY PASSWORD AND THEY ASKED TO WRITE PASSWORD RESET CODE THEN HOW TO DO THAT AND WHAT IS PASSWORD RESET CODE

This is information from the Tech Sheet.

Fault Code F2 - Error Code E1: Code Explanation: Keypad keytail not connected. Recommended Repair Procedure: 1. Check keypad connector for firm connection. 2. Press CANCEL. If error code returns after 60 seconds, replace keypad. 3. Replace control.

HI. the F-1 code is a System Watchdog Circuit failure code.

Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC).

Concerning the F-5 code. This is an oven temp sensor failure code. have it replaced asap. ((Check the wiring leading to and from the control and sensor for cracks and fouled structure. if the wiring is bad, replace the harness as well)),