Question about Digital Cameras

1 Answer

I have a minolta maxxum htsi plus camera, but I have no directions on how to use it. I dont know what all of the buttons and settings are for. Is there a online directions I can download so I can learn how to use it properly

Posted by on

  • deewee96 Sep 03, 2008

    This was everything I could hope for. I now have the complete instruction manual. I am very happy and am excited about getting started taking pictures. The manual looks like it explains the operations of my camera in good detail. Thanks again, my problem is solved!!!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,113 Answers

Hi - You can download the manual by clicking the link underlined in blue below:

maxxum htsi

i have a minolta maxxum - 8caf775.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Posted on Sep 03, 2008

  • Greg Cann
    Greg Cann Sep 04, 2008

    Thanks for the good feedback, it makes it all worthwhile!
    Best regards,
    Informatica.


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Old pictures show up fine but new pictures show up very darkkk


two reasons for this are possible:
1) you changed the exposure compensation by mistake to minus something... - see below - change it again to +- zero:
Konica Minolta MAXXUM 5D Instruction Manual Exposure Compensation
old-pictures-show-up-fine-but-new-4qf1labpgcqiqwpsaxwo3k5u-3-0.jpg
2) you should have the ISO settings to auto:


old-pictures-show-up-fine-but-new-4qf1labpgcqiqwpsaxwo3k5u-3-2.jpg
Konica Minolta MAXXUM 5D Instruction Manual Camera Sensitivity iso And...

Jan 28, 2014 | Konica Minolta Dynax 5D / Maxxum 5D...

1 Answer

Need to set self timer


Press the MENU button, select "Drive Mode," then select the self-timer (one-handed clock). To start the self-timer, press the shutter release button.

Sep 06, 2009 | Konica Minolta Dynax 5D / Maxxum 5D Body...

1 Answer

Don't know how to put film into a minolta qtsi maxxum


Hi - You can download the manual from the link underlined in blue below:

minolta qtsi maxxum

89e1c25.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Jul 29, 2008 | Digital Cameras

1 Answer

Bracketing in Maxxum 5D


Hey arnelsartwor,
To set both exposure and flash bracketing you need to press the drive mode button, and then use the up/down arrows to select bracketing and then use the right/left arrows to highlight the drive mode option and then press the center button to select the desired drive mode. These instructions are on page 50 of your user manual. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.

May 23, 2008 | Konica Minolta Dynax 5D / Maxxum 5D...

2 Answers

Need camera manual


you can get the camera manual here

http://manualsforall.com/minolta/minolta-dynax-maxxum-5d-camera-user-manual.html

Mar 20, 2008 | Canon PowerShot SD200 / IXUS 30 Digital...

2 Answers

Minolta Maxxum 7xi Complete User Guide


Hi , try to visit the fixya recommended site www.CameraBooks.com

Mar 18, 2008 | Digital Cameras

1 Answer

Lens adaptor


The good news is that it is possible to get the camera to operate with the lens & adapter :-)

The bad news is that you'll only be able to use it in manual mode :-(

To get the camera(s) to actually fire, you will need to change some settings.

For the Maxxum 7:

Go to Custom settings (No.16) and change to 'Lock Off'.

For Maxxum 7D

Go to the settings menu (purple cog icon) and then to sub-menu 3. Change Shutter lock to Off.


With the camera set to Manual mode, you can still use the built-in meter. Half-press the shutter button and you will see a metering scale appear in the viewfinder. This will indicate whether the shutter/aperture setting you've selected will over/under-expose the image. Adjust your settings until the indicator bar is over the zero.

Hope this helps,

Matt.

PS. Even if you could somehow modify the adapter, the lens won't have the necessary electrical and mechanical coupling for the cameras to control it in an automatic mode.

Mar 05, 2008 | Konica Minolta Maxxum 7D / Dynax 7D...

1 Answer

Minolta Maxxum 5D


The P-channel MOSFET switching the CF power is dead. It is on the little board directly above the battery compartment. SOT23 package, the marking is 338 or something like that. Replace it and it will work.

Mar 04, 2008 | Konica Minolta Dynax 5D / Maxxum 5D...

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Cameras Experts

kakima

Level 3 Expert

96627 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...