Question about Nikon Coolpix L11 Digital Camera

1 Answer

Will not stay on

When turning 'on' it automatically turns 'off', by itself, immediately. Changed the batteries but that did not resolve the problem. (The batteries that were replaced were fully charged anyway)

Posted by on

  • messerh Sep 02, 2008

    Thanks - I think I just sent another request vs. responding to you.

    However, the lens would extend and immediatly retract. So you may be very correct in that it may not be turning 'off' The LCD would not light up, but probably because the lens closed so fast.

  • Anonymous Sep 09, 2008

    same problem

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Hello,

Will the lens extend when turning on? , can you see any message on the LCD? it is possible there could be a system error or lens error (lens error if jammed all the way in closed position, usually makes the camera shut off right away)

Posted on Sep 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error E0


Error E0 results from the copier being turned off and on immediately after an error. Most likely there is another underlying error on your copier that needs to be resolved, but in some cases leaving the copier powered off for a couple hours can resolve the problem automatically. If you see another error code (most likely E000, E001, E002, or E003), your copier may need repairs.

May 10, 2012 | Office Equipment & Supplies

2 Answers

Changed battery won't turn on


Try inserting a tooth pick into the reset hole found just below on-off button and slightly to the left. Apparently the camera requires a reset after batteries have been changed. Our problem after resolving this problem is now the camera doesn't always stay on, i.e., turns off by itself.

Jul 19, 2010 | Vtech Kidizoom Digital Camera

2 Answers

My ps3 will not stay on, i push the button to turn it on and it turns on but then immediately turns itself back off and the red light flashes


you have a hardware failure either your cpu or gpu has died cannot be fixed, ring up sony and get it replaced

Sep 11, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

When the camera is turned on with the power button the lens comes out and stays out but the camera immediately shuts off and the lens stays open. The only time the camera remains on is when the dial at the...


Please try Power Resetting the Camera.
To Power Reset the Camera, First, please turn OFF the Camera.
Then, remove the battery pack from the Camera.
Then, press and hold the POWER button on the Camera for 30 seconds.
Then, reinsert the battery pack and check whether the issue is resolved.

Jun 13, 2009 | Sony Cameras

1 Answer

5 blinks, Sony KP-65WS500 stays up only with one CRT gun at a time....


5 times blinks shows White Balance error in tv. You need to adjust Screen Volts (G2) and problem will resolve. Screen volts controls located at Focus Block as shown in below picture.

d90a778.jpg Need further help, please let me know.
Bye.

Sep 09, 2008 | Sony KP-65WS500 65" Rear Projection...

1 Answer

Player not working


  • If your MuVo player turns off automatically after a few seconds of operation, or if it turns off immediately when you press any button on the player, it is possible that the battery is depleted or the firmware is corrupted.
  • To resolve this difficulty and prevent it from happening again, update the player's firmware
  • Aug 30, 2008 | Creative Labs Nomad MuVo TX MP3 Player

    1 Answer

    TV Problem


    SANYO MIGHT HELP YOU BUT YOU NEED TO CALL IMMEDIATELY BEFORE MORE DAYS GO ON..

    Feb 21, 2008 | Televison & Video

    Not finding what you are looking for?
    Nikon Coolpix L11 Digital Camera Logo

    Related Topics:

    187 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nikon Cameras Experts

    kakima

    Level 3 Expert

    102366 Answers

    Steve

    Level 3 Expert

    3287 Answers

    Ric Donato

    Level 2 Expert

    225 Answers

    Are you a Nikon Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...