Question about HP iPAQ H5450 Pocket PC

1 Answer

Email I have input the required information for my email. It then connects and says logging on then the password screen appears I select OK it then states logging on and then the password screen appears again. I have triple checked my passwords etc. Is there something I am missing ? I have read the manuals etc

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 450 Answers
Re: email

Have a look at this little guide to see uf there's anything you might have overlooked: And try this: wherever you're asked, giive the long form of your e-mail address (that is, [username] PLUS @[domain]).

Posted on Sep 14, 2005

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Connect for email and internet surfing

As far as I know, some N300 series PDAs have a built-in Wi-Fi card. If this is your case, gather your Wi-Fi router's (or the one you want to connect your PDA to) SSID and encryption informations, go to 'Start > Settings > Connections tab > Wi-Fi' and tap 'Search for Networks'. After a while, the available WLAN should appear on screen. Select yours, fill in the required informations, and, after a while it should get connected. Otherwise (i.e., if your PDA is not Wi-Fi enabled), you will still be able to connect to the internet whenever it is connected to your PC (which should be on-line, of course).
Anyway, if you happens to miss your device's user guide, feel free to download it from this location.
Just my 2 cents...
Regards, Carlos

Jul 22, 2010 | Acer N300 Pocket PC

2 Answers

Need email setting for nokia n81 incoming and outgoing

Hello :

Here are the instructions :

Setting up email:
1:From the standby screen, press the Messaging softkey . Altenatively, press the Menu button, and highlight Messaging .Press Open.
2:Scroll down to highlight New mailbox .Press Open.
3:A message appears: No mailbox defined. Define now? .Press Yes.
4:Instructions appear for the email wizard .To start the email set-up wizard, press Start.
5:In the email address box, type in your full email address .Press OK.
6:You can now type in the name you want to call your email mailbox, or leave it as the default name of your email service .Press OK.
7:You are asked to define the user name and password for your account . Press Yes to continue.
8:In the User name panel, edit the email address until you have your user name - this is usually the bit of your email address before the '@' sign, (though if you're unsure, check with on your email service provider's website).
9:When completed, scroll down using the navigation pad to highlight the Password panel. Type in your email account password . Press OK.
10:After a few moments a message appears onscreen informing you that the email mailbox has been defined .Press OK.
11:The first time you set up, you will be taken into your mailbox and asked: Connect to mailbox? . Press Yes.
12:After a few seconds while the phone connects, you will get a list of email message subject headers onscreen . Scroll through the list to highlight ones you want to view.
13:Press Open to download and view the full email. Scroll down to read the message .
14:If the message has an attachment, scroll to highlight it and press Attachments . Highlight the attachment and press Open . You'll be able to see the attachment in full . Press Close and Back to return to the original email.
To get back to your mailbox, press Back. Alternatively, if you want to reply, forward or see other options, press Options. A list appears onscreen .

 Replying to emails:
1:To reply, highlight Reply. Press Select. Highlight To sender .Press Select.
2:Type in the text of your message. You can also edit or delete the original message if you want to, add new recipients or alter the subject header .
3:When you're ready to send, press Options, highlight Send and press Select .
4:Alternatively, before you send the message you can add an image or other files by selecting Insert from the Options list and pressing Select .
5:A row of icons appears at the bottom of the display, representing different elements you can insert - images, others, video clips, sound clips or text . Highlight and select one of these, and you can search through files to add a suitable attachment. Press Select to add it to your email.
6:When ready to send, as before press Options, highlight Send and press Select .
Checking for new emails :
1:To check for new emails go to the Messaging menu as before .
2:Scroll down to the name you gave your email mailbox . Press Open.
3:If you're not currently connected, you will be asked if you want to connect to your mailbox . Press Yes. New messages will now be retrieved.
4:If you are already in your mailbox and want to check for new messages, press Options, scroll down to Retrieve email .Press Select.
5:Highlight New . Press Select. New messages subjects will be delivered to your mailbox.
Sending new emails: 

You can send messages as emails as quickly and easily as text or MMS messages.
1:In the Messaging menu, highlight New message .Press Select.
2:Scroll down to highlight E-mail . Press OK.
3:Add the email address, subject and message .
4:If you want to, add any attachments in the way outlined above.
5:As before, when your email is ready to send, press Options, highlight Send and press Select .

good luck .

rate please !

Mar 18, 2010 | Nokia N81

1 Answer

How to have email in my k810i

By default, you may have some email settings provided by you network provider, but ignore them for now – you can always find them again later. Highlight Account Settings and press Select , then scroll up to Create new account and press Add.
  • First enter an account name, for example type ‘Gmail’. Now press OK.
  • Now you’ll neeed those details you found out earlier on. Highlight E-mail address and press Select. Enter your full email address for this account. Press OK .
  • Highlight Connect using and press Select. Select your mobile network provider from the list and press Select. If you are unsure of which is the right one, contact your network provider, but normally you should be looking for the same option as you use to connect to the web, for example: Vodafone GPRS .
  • Connection Type should already be set to POP3 by default, but if not, press Select, highlight POP3 and press Select .
  • Highlight Incoming server and enter the Incoming server address you found out earlier. It should look similar to a website address .
  • Highlight Username and press Select. Enter the username provided by your email provider and press OK .
  • Highlight Password and press Select. Enter your ordinary email password and press OK .
  • Highlight Download and press Select . This lets you decide how much of your email will be downloaded. By default it should be set to Header and Text, but to save more money on data fees, you can highlight Header only and press Select . You can also limit how much of the email is downloaded by pressing Size limit. Enter a number of less than 200 to reduce the number of kb downloaded.
  • Go back and highlight Check Interval and press Select . This lets you choose whether you want the phone to automatically check for new emails at regular intervals of 5 minutes, half an hour, an hour… all the way up to every 12 hours. Or you can leave it set to Off, allowing you to do it manually and save on data fees. Press the Back button to return to the Account settings menu.
  • If you want, you can set up an outgoing server so you can send emails as well as receive them. If you don’t want to do this right now, you can skip the next few steps.
  • To set up outgoing emails, highlight Outgoing server and press Select. Enter the outgoing server address given to you by your email provider and press OK .
  • Highlight Username, press Select and enter the same information as you did previously for Username. Now press OK.
  • Highlight Password, press Select and enter the same information as you did for previously for Password. This is your ordinary email password again. Now press OK.
  • You can choose to enter your name and a signature by scrolling down and highlighting Your name and Signature and pressing Select.
  • Some email provider may use encryption, so you can set this up by highlighting Encryption and pressing Select . Choose the type of encryption your email provider requires for both incoming and outgoing mail and press Select. Normally, you’ll need to select SSL for each, although it may vary between providers. If in doubt, leave blank or check with your email provider.
  • Highlight Incoming port and press Select . By default this should be set to 110, but different email providers may require different port settings. If in doubt, check with your email provider. Press OK.
  • Highlight Outgoing port and press Select . By default this should be set to 25, but different email providers may require different port settings. If in doubt, check with your email provider. Press OK.
  • Last of all, press Done to finish the setup. This will return you to the Account setting menu. Highlight the account name you made in step on

Jul 09, 2009 | Sony Ericsson K810i Blue Smartphone

1 Answer

LG Viewty email set up

1 Find "Access points"
  • Press the menu icon.
  • Press the fourth tab.
  • Press Phone settings.
  • Press Connectivity.
  • Press Access points.
2 Create new or edit existing data connection
  • To create a new data connection:
  • Press Add.
  • To edit an existing data connection:
  • Press the required data connection.
  • Press the icon to the bottom left.
  • Press Edit.
  • Press the Connection title input field.
  • Press C to clear the input field.
  • Key in EMAIL GPRS and press OK.
3 Select data bearer
  • Press the Bearer drop down list.
  • Press UMTS or GPRS.
  • Press OK.
4 Select authentication
  • Press the Authentication drop down list.
  • Press PAP or CHAP.
  • Press OK.
5 Enter username
  • Press the Username input field.
  • Key in user and press OK.
6 Enter password
  • Press the Password input field.
boxAdd('info6', cBoxClosed); The APN name must be in lower case letters. 7 Enter APN name
  • Press the APN input field.
  • APN same as your internet settings
8 Save and exit
  • Press Save.
  • Press Disconnect to return to stand-by mode.
Please note: You now need to select settings for an email profile.

Nov 17, 2008 | LG KU990 Viewty

1 Answer

Manual programing

You need to be more specific about what you want to do
with your phone.
However, I know that everyone uses Email, so I will give you
an example of how configurable is.

This is how you can do Personal Email Setup
[with providers with automatic settings - Motorola approved]

During automatic setup all the necessary settings for the ISP is downloaded from the network. A few popular ISPs with automatic settings include:


  • You'll need this information ready:
    • POP3/IMAP provider
    • Your username, password, and any special security requirements
    Note: For these instructions, “LSK” refers to the Left Soft Key; “RSK” refers to the Right Soft Key on your Motorola Q.
    1. Press Start, locate the Messaging Icon.
    2. Move cursor over Messaging Icon and select.
    3. Select B. Outlook Email
    4. Press Menu
    5. Select Options
    6. Select New Account
    7. Input your name (as they want it to appear to any email recipients). Press the down arrow key when complete.
    8. Input your email address. Press the down arrow key when complete.
    9. Select the “Attempt to obtain email settings from the Internet.” check box.
    10. Press the Next button. (RSK)
    11. Allow the device to obtain the settings. There should be a success message when the process is complete: “Success. Auto obtained settings for”.
    12. Select Next (RSK)
    13. In the User Name field, input your login. Press the down arrow.
    14. Input the password for the account in the Password field.
    15. If a domain exists for the account, it will be automatically populated. Note: For most POP3/IMAP4 account, a domain is not necessary.
    16. Select the check box to save the password.
    17. Press the Next (RSK)
    18. All fields on this screen will be automatically populated.
    19. Press Next (RSK)
    20. All fields on this screen are automatically populated.
    21. Press Next (RSK)
    22. Choose how many days worth of email you would like to receive. Use the left/right arrows to make selection.
    23. Choose the initial size of each email you would like to receive. Use the left/right arrows to make selection.
    24. Press Next (RSK)
    25. Select how often you would like the device to automatically synchronize with this email account. Note: If you plan to sync another email account via ActiveSync using a scheduled sync, the POP3/IMAP4 account should not be set to sync on a schedule. If the POP3 account is set to sync on a schedule, it will disrupt the ActiveSync scheduled sync.
    26. Press Next (RSK)
    27. Press Finish (RSK)
    28. If you would like to download the email from the account press Yes (LSK). Press No (RSK) if you do not want to download the email from your account. Note: To delete an email account, From Home Screen > Start Menu > Messaging. Select the Account you want to delete (e.g. Yahoo!). Press Menu > Options > Account Options. Highlight the account you want to delete. Press Menu and select Delete.

    Feb 21, 2008 | Motorola Mobility Moto Q

    1 Answer

    How to connect my palm to my computer when I am using a reseault Linksys

    hi. try this.

    have the tx search for you network using the wifi button at the bottom of the screen.
    select/highlight your network and click edit. note do not connect to it yet
    click configure.
    on the security, pull down the arrow and pick WEP (or WPA according to what your router has.) note that since you mentioned the 10 digit alphanumeric code i assume it is WEP
    on the key type click on 40 bit hex
    i usually leave the four keys unchecked. (unless you have 4 keys)
    insert your alphanumeric key that you use to protect your network into the dotted line.
    click yes to connect. enjoy.

    if your pda has connected and you still cannot get your internet, please read below.

    PS. some internet servers may require a new user to input a name and password as a safeguard. this is familiar when you try to log into a public wifi hotspot with your laptop and the web browser always redirects you to an agreement page.

    if this is so, what i do is to run my internet browser. let it load the first page then i accept the agreement and i am in.

    hope this works for you. please feel free to email me with any more questions.

    Sep 29, 2007 | Palm TX Handheld

    1 Answer

    Yahoo email connect on my blackjack

    Reset the phone, turn off leave it for 10 mins and on. Log in again..

    Sep 21, 2007 | Samsung BlackJack

    Not finding what you are looking for?
    HP iPAQ H5450 Pocket PC Logo

    Related Topics:

    36 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP PDAs Experts

    David Payne
    David Payne

    Level 3 Expert

    13436 Answers


    Level 3 Expert

    3932 Answers

    Bob S

    Level 1 Expert

    15 Answers

    Are you a HP PDA Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides