Question about Bugaboo Cameleon Jogger

1 Answer

I dont know how to change from the cameloen bassinet to the seat part thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You just have to change the fabric. Take off the bassinet fabric and put the seat fabric on.
This video might help:

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My bugaboo cameleon frame wont click on the chassis


The chassis must be fully opened out and the handle locked in position before the seat / bassinet frame can lock down on to it. The seat / bassinet frame is the safety lock keeping the frame ridged. You should see a square hole (made by two half squares from adjoining hub disks) at the top of the chassis hub assembly when fully open. A square pin under the seat frame must engage into it and the white release button must click. Your Bugaboo will not br safe unless this happens and you should contact the seller to help.macnutz_36.jpgmacnutz_35.jpg

Jul 10, 2011 | Bugaboo Cameleon - Tailored Fabric...

1 Answer

Hi, when I open my Bagaboo Frog stroller and flick the front (small wheels) out, they dont lock into place. This means when i am walking if I lift the pram up to go onto a curb, those small front wheels...


The chassis is locked by the seat or bassinet unit clicking down onto the black prongs that stick up from the central hubs. It would be mechanically impossible for the front wheel assembly to swing back if the seat was fully engaged into the hub as it has a large plastic block that fits into the hubs to lock them. Remove the seat check for any obvious damage, spray some silicone spray on the prongs and the square white lock buttons. Wipe of excess with a paper towel than try to fit seat again. macnutz_13.jpg

Jun 24, 2011 | Bugaboo Frog Stroller

1 Answer

Will the bugaboo chameleon seat/bassinet frame fit on the bugaboo frog chassis?


The answer is yes, the chassis prongs are the same size and spacing. The size of the seat and bassinet are different so the fabric sets are not compatible.

Nov 24, 2010 | Bugaboo Cameleon Stroller

1 Answer

Hi...can I convert the seat into a bassinet or do I need to buy a whole different piece?


you can not convert the seat into a bassinet it's completely different you will need to buy the carrycot canvas. try www.buggypitstop.co.uk they have all the parts for bugaboo

Nov 30, 2009 | Bugaboo Frog - Black Stroller

1 Answer

Quinny XL Freestyle - I can't press the foot break & need parts


1. I went to "Baby Corb" and they sprayed some oil on it. The breaks work now. Email me for details. The side wheel is still a little noisy.
2. One can buy the seat there.

Sep 02, 2009 | Quinny Freestyle 3 XL Stroller

1 Answer

I have a quinny buzz 3 wheel pushchair. i brought it 2nd hand. iT COMES With 2 parts a crib and a child seat. i do not know how to fit the crib on to the frame as i think that there is something missing....


There is a plastic adapter part that is supposed to come with the bassinet. There's one for each side where the Bassinet attaches. It's the same part that's also used to attach the car seat. I suggest seeing if you can purchase just that adapter on the Quinny website.

Apr 24, 2009 | Quinny Buzz Three Wheel Stroller

1 Answer

Bassinet to seat


If you do not have your manual, go to www.bugaboo.com and download one. It will explain how the frame for the bassinet is used on the seat set up.

Good Luck! from Moms Just Know

Sep 02, 2008 | Bugaboo Cameleon Jogger

1 Answer

I don't know how to change my bugaboo frog from the chair to the bassinet?


You'll have to undo all the velcro attachments as well as the tether that snaps together behind the foot rest then slide the seat fabric out from the frame. You'll then have to attach the bassinet to the same frame using the velcro straps.

Aug 14, 2008 | Bugaboo Frog Stroller

1 Answer

Tilting bassinette


Hey momofila:

This may help:

While installing the bassinet fabric set onto the bassinet/seat frame, there are two Velcro straps that hold the bottom portion of the bassinet fabric onto the vertical connectors that attach to the chassis. You can find these if you follow the vertical connectors up from the ground (if the bassinet is sitting on the ground). They should be about 2 inches from the bottom of the bassinet on both sides. These Velcro straps hold the bassinet fabric onto the frame so the bassinet does not tilt. If these are fastened properly, and the bassinet is still tilting, you can take a photo of the problem and email me at strollerinfo@gmail.com. I will take a look at the situation and try and help more.

Hope this helps!

StrollerInfo
www.StrollerInfo.com

Jul 23, 2008 | Bugaboo Frog Stroller

Not finding what you are looking for?
Bugaboo Cameleon Jogger Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bugaboo Baby Strollers Experts

Stephen Faulkner
Stephen Faulkner

Level 2 Expert

541 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2621 Answers

Are you a Bugaboo Baby Stroller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...