Question about Jensen CD400M CD Player

Open Question

Jensen cd400m manual

Anyplace to get a manual for a jensen cd400m

Posted by on

  • 1 more comment 
  • keegah Sep 03, 2008

    i have one on the boat i purchased.

  • Anonymous Feb 17, 2009

    i dont know how to program the # buttons...

  • Daniel Jenkins
    Daniel Jenkins May 11, 2010

    Why would you need a manual for this?

×

1 Suggested Answer

  • 42 Answers

SOURCE: Jensen CD400M / IPOD

Based on the specs of the CD player there are no AUX inputs on the deck. Neither 1/8 inch or RCA inputs. Has preamp RCA outs but that doesn't help. The only way to do it would be to use an FM Transmitter. Like these ones or others that are compliant with your generation of Ipod.

http://www.bestbuy.com/site/olspage.jsp?id=abcat0208031&type=category

Hope this helps. M~

Posted on May 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why dosent my computer read my jensen mp3 player model smpv-4gbeb when i plug it into the usb port


I changed the usb connection. My camera usb connection fits my player, and it worked. For some reason the usb connection for the player didn't work.

Nov 08, 2010 | Jensen CD400M CD Player

1 Answer

It got wet


Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question.

Jul 18, 2010 | Jensen CD400M CD Player

1 Answer

How do i set the clock on a jensen cd 615x ?


Hello there, I came across the manual on Jensen's customer support site:

http://voxrightnow.custhelp.com/app/answers/detail/a_id/6194/~/owners-manual-operations-manual-for-jensen-cd615x


The Manual:

http://voxxsupport.com/images/User%20Manuals%20-%20FAQ%27s/CD615X_Operation.pdf


The Instructions from Page 4:

1. Press and hold DISP for 3 seconds until display flashes.
2. Within 3 seconds, press >> to change minutes, << to change hours.

I hope that helps.

Jun 18, 2010 | Jensen CD-615X CD Player

1 Answer

No radio reception cracking sound


If it`s just a radio with no reception then check  that the aerial is fully plugged in correctly and making a decent connection

Sep 12, 2009 | Jensen CD400M CD Player

1 Answer

Speakers Crack at mid to high volume (anything over level 20)


make sure speakers are connected properly to individual speaker outputs from radio .Also make sure speaker cables going to speakers are not pinched or shorted anywhere

Jul 30, 2009 | Jensen CD400M CD Player

5 Answers

FM Reception with Jensen MSR3007


I have the exact same problem with the exact same stereo. I started by removing the in-line AM/FM/VHF Separator and connecting the antenna directly to the stereo. The static/popping/fade-out continued. Today I swapped to a new antenna, but it did not help. I swapped back to the original antenna and for a brief while, I had good reception. The I went to coil the excess antenna cable and the static/popping/fade-out resumed. I have narrowed it down to either the antenna connector coming out of the back of the stereo or an internal circuit. Either way, it does not look like a do-it-yourself fix.

May 31, 2009 | Jensen CD400M CD Player

1 Answer

Amp stereo hook ups


You need to run RCA cables from the RCA output jacks on the back of the Sony to the input RCA jacks of the Jensen amp. Then you need to run a wire that connects to the blue wire of the wiring harness on the sony to the "remote" or "turn on" terminal of the jensen. That is the wire that turns the amp on when the radio is turned on. It should be on the power wire terminal of the jensen along with the +B (positive) and the GND (ground) terminals. Those are the only ones that go from the Sony to the Jensen. You also need to have the speakers connected to the speaker jacks of the amplifier, and the power wires connected to the power terminal of the amp. The positive power wire needs to go to the positive battery terminal and the ground should be connected to the chassis of the car close to the amplifier. make sure the ground is connected to a clean bare metal part to make sure it is good.

Thats all, but you also need the proper guage wire and make sure no bare wire is exposed to any metal areas or the chassis of the car. You can get all of those things at anyplace that installs car audio. They can tell you the proper guage wire and they have the RCA cables to.

If you are not experienced at this type of installation you really would be better off lettng a professioanl do it for you. It is easy to wire something wrong and damage the amp and/or the receiver.

The wires also need to be run in a place that they will not be damaged and are out of the way.

Ihope this helps you, and please be careful. Help is here if you need it.

If you found this information to be helpful a rating of "FixYa" would be appreciated. It is the only reward we get for the free help we offer.

Thanks,

Dave

Jun 28, 2008 | Tomtom GO 700 GPS NAVIGATION BRAND ONLY...

1 Answer

Jensen CD400M / IPOD


Based on the specs of the CD player there are no AUX inputs on the deck. Neither 1/8 inch or RCA inputs. Has preamp RCA outs but that doesn't help. The only way to do it would be to use an FM Transmitter. Like these ones or others that are compliant with your generation of Ipod.

http://www.bestbuy.com/site/olspage.jsp?id=abcat0208031&type=category

Hope this helps. M~

May 01, 2008 | Jensen CD400M CD Player

2 Answers

Need manual for jensen cd4610


go to jensen.com and download the manual

May 11, 2007 | Jensen CD4610 CD Player

Not finding what you are looking for?
Jensen CD400M CD Player Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio Receivers Experts

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Are you a Jensen Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...