Question about Projection Televisions

1 Answer

Component connection doesnt work on rca 32v550t

Posted by on

  • Jean Leblanc Sep 03, 2008

    the ports seem fine. The component connections work in 480i, but as soon as i switch to 480p or 720p, all i get is mostly black screen with white diagonal lines for 3 secs, after that displays "unusable signal".

    Wouldn't be surprised the connections are defective from what ive seen on the net,pretty crappy tv is how most people described it.


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Some RCAs were sent through the assmbley line too fast and some of the grounds were not soldered properly.Carefully check the plug-in ports to see if they are loose. You will probably need to take it to a repair man.

Posted on Sep 02, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I connect a blue ray player to this RCS model

Yes, web search "component to HDMI converter"

Dec 27, 2014 | RCA Projection Televisions

1 Answer

Component to HDMI Converter Problem

Does the TV have a plug connection I think is called DVI. There is a DVI to HDMI adapter that also needs an audio connection on TV to work. Other option is audio and video rca cables. You may also need to change input connection to correct source, as it may not be auto for connection

Jan 03, 2014 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

RCA hd52w67 analog convergence problem.

with Tv off press and hold ch- and vol- at same time untill tv turns on then release and you should be in factory settings service mode.

May 26, 2010 | Projection Televisions

1 Answer

Runco DTV-5800-component to BNC connection problem

component cables have standard RCA fitting on the end. you can however but adapters enc to RCA. these work well are are readily available through eBay

May 04, 2010 | Runco DTV-5800 58 in. Rear Projection...

1 Answer

60" RCA TV

The tuner in RCA is a known issue. I recommend connecting the satellite with RGB (Red-Green-Blue) component cables and red/white sound cables and use video. The picture will be better. The tuner repair can be pricey $$$

Apr 02, 2010 | RCA P52921 52" Rear Projection Television

1 Answer

We have a RCA Model 32V550T TV. It just all of sudden decided not to come on. You can press the button on top, nothing, the same with to remote. It did this one other time, but it came on. I have tried...

Try to unplug the tv for 30 min. then try to see if it works. If not, there is a fuse in the tv. take off the back cover and replace it. If it blows again, take it to a repair shop. If the fuse is good, you will still need to take it to a repair shop.

Mar 15, 2008 | Projection Televisions

2 Answers

RCA D52W17 won't stay on.

Possiblility include bad convergence cuircit. A component that is overheating and bad solder connections.. Technicians can use special equipment to read error codes... this will tell them the error that is shutting it down

Mar 13, 2008 | RCA D52W19 52" Rear Projection Television

2 Answers

RCA D52W15 52 in. Rear Projection HDTV-Ready Television

The component connections are usually video only and the audio goes to separate connectors set aside for that input. Check your manual to make sure you have all the connections made.

Dec 02, 2007 | RCA D52W19 52" Rear Projection Television

2 Answers

Mitsubishi WT-46809 Problem getting HD from DirecTV

I have the same exact problem. Same model, etc. Is there a resolution?

Sep 16, 2006 | Mitsubishi WT-46809 46" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers


Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides