Question about Computer Cases

1 Answer

Ei 4419 laptop

How do I remove the keyboard

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

Pull out the socket

Posted on Sep 08, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keyboard mouse touch pad does not work cant type ect


Try a full reboot. Power out and remove battery. If the cable from the trackpad is intact and connected there is not much else you can do economically as the fault could be the motherboard or the trackpad. In the meanwhile you can use an external mouse

May 13, 2014 | Samsung Notebook Np-n150 Plus Laptop Hard...

1 Answer

My laptop R18+ is not opening the massage is system registry file is missing or corrupt status 0xc000014c,,what is the problem with my laptop?


Their are few reasons behined this Stop error. It might be due to hardware problem or windows is corrupted. WebRepOverall ratingThis site has no rating(not enough votes)

You need to perform the following steps:

Update the drivers
Fix registry errors
Scan PC with an updated Anti-Virus
Run AntiSpyware
Remove third party programs
Remove junk frm temporary internet folders

If problem still occurs then use system utility tool Reginout to fix this error.

Dec 04, 2012 | Samsung R18 R20 R25 R455 R458 R457 R466...

1 Answer

Black screen


A blacked-out screen doesn't necessarily indicate a broken monitor. If the computer has run out of charge or is in hibernation or sleep mode,

if the screen is too dark, or if the display cable has come disconnected from the motherboard, the screen may appear black or fail to turn on.

To fix a blacked-out laptop screen, troubleshoot the screen settings, check the LCD connector and see if the computer is awake and receiving power.

Touch the touchpad or move the external mouse to see if the computer is asleep or hibernating. If the computer fails to respond, press "Enter" on the keyboard.

Press the power button if the screen remains black. Confirm that the power indicator light, found at the front of the computer or above the keyboard, is glowing solid green or blue.

Confirm that the power adapter is plugged into the computer and into a wall outlet. Confirm that battery indicator light is glowing solid green or blue.

Hold down the "Fn" key. Press the up-arrow to see if the screen brightness increases. Some computers also use the "F6" or "F7" keys to increase screen brightness.

Hold down the power button for 10 seconds to turn off the laptop. Remove the AC adapter from the computer, close the screen, and then turn the PC over.

Slide the battery latch to eject the battery. Pull the battery out of its compartment. Turn the computer back over, open the lid, and insert the edge of a flathead screwdriver or other flat, solid object beneath the bezel above the keyboard.

Wedge the edge of the keyboard bezel off of the top cover. Work your way along the edge of the keyboard bezel to loosen it. Pull the bezel off the laptop.

Trace the cable coming from the laptop screen to the connector found beneath the bezel. Reconnect the display cable to the motherboard if the cable has come loose from the connector.

Line up the tabs on the bezel with the slots along the top of the keyboard. Insert the right edge of the bezel into the gap above the keyboard, and then push the bezel back in place.
Turn the computer back on. If the laptop screen is still blacked out, connect an external monitor to the video port on the side of the PC to confirm that the video card isn't defective. If the external monitor works, the LCD screen could be broken. If the monitor doesn't work, the motherboard or video card might need to be replaced.

hope this helps

Jul 20, 2012 | ASUS K60ij 16" Genuine Laptop Hard Drive...

1 Answer

I dont have a laptop or the same computer but I have the same problem. However my problem is even more painful as my computer wont frickin recognize my keyboard. So I cant enter BIOS or boot the Windows...


You're not using a wireless keyboard that could have a "dead" battery inside????

Check that the keyboards (PS/2 and USB) work in some other desktop computer.

Disconnect the disk-drive's "data" cable.

Hold down any key on the keyboard, and then turn your computer on, hoping to generate a "keyboard error; press any key to enter BIOS setup" message.
Now, does the keyboard work?

Insert the Windows CD-ROM.
Startup your computer, and it should boot from the CD-ROM (since the disk-drive is not accessible).

Eventually, it will "pause", and ask for keyboard input.

Try each keyboard, and see if either keyboard works.

If not, then your motherboard is the cause of your problems, and needs to be replaced.

Jan 19, 2010 | Computer Cases

1 Answer

Laptop Lid will not open


There are two metal hinges that are on that laptop model and are at top of laptop near keyboard and screen joint. When one of these hinges breaks, and they do, it can become jammed. By continuing to try and open it you run the risk of damaging the LCD on the laptop. The top of the laptop has to be removed to access the hinges and replace them. This is not something a novice can do easily and is dangerous to the laptop. If its not under warranty and you feel comfortable with your skills you can try. However I would recommend a repair shop. The hinges for this model run about 10 dollars for the pair and the labor would be whatever the local rate is. To see the hinges that are for your unit.. this link has a good picture http://battery-adapter.com/product_info.php/products_id/3463

Sep 27, 2009 | Computer Cases

2 Answers

Replacing Power Button Circuit Card on Gateway W730 K8X Laptop


The instructions for replacing the keyboard include the cover you have to remove to replace the power button pcb. The power button pcb is attached to the bottom of the bezel that covers the hinges/button array. In a nutshell you just remove the 2 screws indicated in the instructions, pry the hinge covers up a bit, then gently pry the bezel up from the bottom. remove the ribbon cable, pull back the small piece of tape, remove the three small screws holding the pcb on, and remove it from the spring clips.

Apr 11, 2009 | Gateway Computer Cases

1 Answer

ACER NOTE BOOK


Check the bottom of your computer. There should be a few screws holding the keyboard. Remove those and set them aside (DON'T LOSE THEM). Then, using a small flat head screwdriver, lift up the plastic panel gently just above the keyboard. Be careful that you don't break this. Finally, there should be a few screws holding the keyboard in place, remove them & lift up the keyboard. If you can't lift it up all the way, make sure there are not additional screws on the bottom holding it into place. Carefully remove the cable that connects the keyboard to the motherboard. Repeat the process in reverse for installing the new keyboard.

FYI: You will need a laptop keyboard from the same model notebook or the replacement won't work.

Apr 11, 2009 | Acer Computer Cases

1 Answer

My Lenovo 3000 G400M Laptop's BIOS password was set automatically and unknowingly. I dont even know what password has been set. I tried a lot to reset it according to my knowledge, but all in vain. Please...


The easiest way to do this is to remove the keyboard and look for the bios battery. Unplug the laptop and remove the normal battery and then remove the bios battery for about 10 mins. Replace the Bios battery, replace the normal battery, plug the laptop back in and the password should be gone.

Dec 12, 2008 | Computer Cases

1 Answer

Replacing a DVD DRive in Averatec 5110


If your removing your dvd drive, disconnect any usb and power cables, hold down the power button for a few secs. You should be able to undo the screws and cables and then slide it out of the holder. Some times there are screws hidden. Usually there are four. If it catches on the front 'plate', you may have to remove it, but be careful, sometimes there are wires attached. This is, of course, for a desktop NOT a laptop. Dont worry about disconnecting your keyboard, but make sure that anything that has its own power is disconnected. This also depends on the design of your case as well. Good luck.

Oct 05, 2007 | Computer Cases

Not finding what you are looking for?
Computer Cases Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Cases Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

Are you a Computer Case Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...