http://www.fixya.com/support/sharp/microwave_ovensSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 18 Dec 2009 04:00:55 GMT80http://www.fixya.com/support/t3286896-microwave_convection_oven_in_our_fifthMicrowave/convection oven in our fifth wheel will not run past 59 seconds. For example trying to reheat a cup of coffee set at two minutes - it will only run for 59 seconds. I am afraid to try the convection oven. Please help.Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t3155503-opened_door_sharp_microwave_nowi opened the door on my sharp microwave and now it wont latch. it sounded like something snapped off where the door latches to the microwave, not the door itself . Even if the door is held shut the light stays on and it wont workFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t3027953-sharp_r930_ok_last_nightI have a Sharp R930 which was OK last night. This morning there is no power on the unit, the wall outlet power is OK.Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2926436-install_latch_spring_in_microwave_doorI have a sharp carousel R-1610 model microwave and the door will not stay closed. I ordered a new latch and spring but cannot find the owner's manual to know how they are to be put in place. Any help is greatly appreciated.Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2858437-sharp_model_r_1871_shuts_off_every_59I have a sharp convection/microwave model R-1871 that is 5 years old. When using convection cycle or microwave cycle the oven shuts off every 59 seconds. If I set it for a minute it will shut off with 1 second left. Any ideas? thanks in advance Read...Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2855329-need_manual_sharp_microwave_convectionWe just purchased an RV with a Sharp Microwave/Convection Oven Model # R7A85. I need the operating maual so that I can cook efficiently. ThanksFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2816091-replacing_damper_motor_sharp_r967Hi, Should the damper door be closed when off and when the microwave is on and open when the convention is on? I am not sure as the orientation of the new motor was slightly out and I needed to turn it to fit. Thus not sure whatis right and wrong.Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2798124-sharpe_microwave_r_316f_display_lightTime display light is out. How do I access it, to replace it?Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2788397-display_partialdisplay is partialFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2690996-door_aparthow take door apart on Sharp r-630d?Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2668055-microwave_works_numbers_display_onlyThough the microwave itself works fine, the numbers on the display are either partially visible or not visible at all. The problem seems to be worsening with more of the numbers disappearing from the display. Can this be repaired?Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2656096-ge_microwave_rusting_under_turntableMy expensive GE microwave is rusting under the turntable. GE seems to think it has never happened before although the same thing happened to my sister's new microwave. In the past I have not had this problem with other microwaves I have owned. The...Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2634120-sharp_r_520lk_arcingSharp R-520LK is arcing. Should I just replace the waveguide cover?? I tried cleaning it, but it was like paper and now there's a small hole in it.Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2622486-internal_fusewhere is the internal fuseFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2555509-after_elec_outage_sharp_carousel_2I have a small vacation place w/ a Sharp Carousel 2 Mwave/Convec oven. At some point over the last couple of months, there was an electrical outage (typical). I normally reset it (Stop/Clear) or Set time - sometimes one has to open and close the door...Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2529425-spare_parts_search_prolinest44_microwaveMy ST44 Proline (950W) Microwave stopped working. Thanks to a previous comment on this page I looked at the internal fuses and discovered that a 5KV 0.7A fuse had blown (this is in a soldered fuse unit connected to the transformer at one end.) Any...Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2312214-door_catch_broken_latch_replaced_orThe right door catch on my Sharp R 9H84B has dislodged (I think it fell inside the slot) and the door wobbles and doesn't close correctly. Can the door be replaced easily?Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2277472-flashing_dispaly_4_eights_no_responseMy Sharp Carousel Microwave 1200W is flashing 4 eights in the display with no response from the keypad..how do I resolve?Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t2240301-sharp_r_1460_microwaveSHARP R-1460 MICROWAVE WAS USING ON A SANWICH IT DID NOT COMPLETE HEATING. NOW HAS NO POWER ON PAD ETC. OUTLET POWER IS OKFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1758492-sharp_r_1490_microwave_2000all buttons, lights, fan & carousel work but no heatFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1652935-sharp_microwave_oven_timer_counts_downI "mis-pressed" the touch screen when entering time/start in my Sharp "Smart & Easy" Model R3H83 (May 1982) microwave. Immediately on entering time/pressing start more carefully, the 90 seconds flashed by in microseconds. Note that when I pressed the...Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1581176-lcd_display_only_partially_workingI have not disassembled te unit yet. I am trying to find the part but have not had any luck. Is the dispaly only available with the main control board? If that is the case is there any work around? Mahalo and Aloha JoeFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1560352-tricky_touch_pad_sharp_r530_es_microwaveThis microwave oven is slightly over 1 year. Touch pad was not responsive to begin with, getting worse over time. In the beginning, I have to push very hard to get response on a few buttons. Then the number "0", "stop/clear and "minute plus"...Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1556615-sharp_1505_microwave_display_failureAll functions work except the display first partially failed and now completely. Is there a single part that runs the display such as the display itself or display driver that has failed? How grievous is it to replace?Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1554088-r1481_no_manualWe can't find the manual - no power, display, etc...power ok from outlet. We need a manual for dismounting, changing the fuse as suggested (where is it?) Can we find a manual to print on-line??Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1442585-sharp_carousel_r1754_microwave_displaytouch pad buttons work, beep,etc.....display screen however, after unplugging for awhile, will come on, then all the display starts "scrambling" and then breaksup and fades out. i wonder if power surge or something got it ??? can i replace JUST the...Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1272401-sharp_carousel_microwave_doesnt_spinEverything works , but the carousel doesn't turn, is it worth fixing? or can it be fixed?Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t1114501-display_window_doesnt_show_anythingThe display window on my microwave doesn't show anything. It's just black. The other buttons seem to work ok. Thanks.Fri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t936549-microwave_user_manualcan you tell me how and wher i can download a manual fpr a sharp R-254 microwave ClareFri, 18 Dec 2009 04:00:55 GMThttp://www.fixya.com/support/t773655-noisy_microwave_not_cookinghave a sharp 1490 over the range microwave that is noisy and doesnt cook. appears to operate but doesnt cook?Fri, 18 Dec 2009 04:00:55 GMT