http://www.fixya.com/support/sanyo/multimedia_projectorsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 07 Dec 2009 11:39:46 GMT80http://www.fixya.com/support/t3168266-put_brand_new_bulb_assembly_into_sanyoWe put a brand new bulb assembly into the Sanyo PLV Z-4 and it still is indicating a problem with the bulb needing replacement. What could it be? Air filters are all clean so it is not that.Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t3102556-plv_z2_globe_will_not_light_up_power_upMy PLV-Z2 will not light up,power up to start,green power light, then turns red flasing with a ringing sound coming from inside unit...globe is older however replace globe light not on...what is the bell sound inside unit?..has anyone had...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t2925712-thought_bulb_bad_replaced_still_noThe orginal problem had the picture gradually getting dimmer and dimmer. I assumed the bulb was bad. Replaced the bulb and I still get no light from the bulb. The fan runs and the machine seems to power up fine just no light. Could I have gotten a...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t2874798-projector_keeps_shutting_off_during_useThe projector keeps shutting off during use. What may be the problem?Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t2714106-power_light_blinking_redwhen we press power button on projector intial it apperas green after almost 1 min. power light blinks red and projector is not focusing the after repeating so many times problem is sameMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t2331120-plv_z1_flashing_lamp_lightI'm working on my buddies PLV-Z1 and he just replaced the lamp, but the ready light does not light and the lamp indicator is flashing... any ideas... looking for a service manual also thanks for any helpMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t2276030-projector_will_not_power_up_confirmedSanyo PLC XP57 LCD projector will not fire up. Power light will not come one. Have tried multiple good 120 vac powe source to unit. Still will not power upMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t1890888-sanyo_xp_56_overheating_all_air_intakesnew bulb, bulb counter reset, projector runs for about 5 or 10 minutes, then shuts itself offMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t1366183-sanyo_plv_70_powers_up_approx_5_secoundsprojector says lamp is ready and green light indactes ready, upon pressing power lamp lights up and then system shuts downMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t1219673-sanyo_plv_z5_projector_says_bulb_needsaccording to the manual the lamp replace light is saying i need to ch1ange the bulb but i did that and i cant get it to turn on now! it turns red and yellow and opens the lens cover but after about ten seconds it closes and locks up and doesnt work!...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t1164008-yellowed_image_projectionI have an issue with the quality of projection. The image itself is clear and legible however there is a strong yellow cast to a portion of the image when projecting. When the projector is powered on and projecting only light (not connected to a...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t589754-sanyo_xu50_not_coming_after_lampI replaced the bulb in my Sanyo XU50 projector and cleaned the filters. Now when I switch it on using the mains power, the power light goes red, when I press the power button the light goes to green and the fan starts up, then the amber lamp...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t386500-sanyo_pro_xtra_projector_warning_lightHi we have a new ( 2 week old) projector. When we turn it on the green light appears and it seems to be turning on. After about 15 seconds the warning light appears and it will not turn on. The cycle keeps repeating itself. We were left no user...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t364693-check_lamp_hours_xf_45_or_xf_35how do you check lamp hours on xf-45 or x4-35 projectors?Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t142670-when_u_switch_timer_comes_30_secondswhen u switch it on a timer comes on for 30 seconds then the projector turns off can any one help pleaseMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t2656809-projector_displaying_yellow_tint_inI have tested in input with RGB(VGA) connections and Svideo connections. I have changed out cables. I have changed the laps. I have check the color tinting settings. All this, however, and the projector is displaying a strong yellowish tint in the...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t649294-sanyo_plc_xu58_projector_completly_deadhave a?Sanyo PLC-XU58 projector was working one day not the next its completly dead when plug in no sounds no led lights absolutly nothing - have tried a different power cable and there is nothing obviously wrong with it bulb is fine and it hasn't...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t511322-projector_turnThe ready and lamp lights are on, but when I press the on/off switch, the lamp light dims as if it is about to turn on but it doesn't. The ready ligh will turn off and the fans will come on then the projector shuts itself off.Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t501493-sanyo_pro_xtrax_plc_xu50Hi, My Sanyo Pro Xtrax has a problem. When I plug it in i get nothing?? No power light, no lights at all havetried new lead and bulb Any Solutions?? Please AdamMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t357117-usb_driver_plc_su70_sanyo_multimediaHi, I Own a Sanyo PLC-SU70 Projector. In that I do have an option to connect my projector to my PC/Laptop through USB Connector. I have Searched for a driver for quite a long time, but I have not suceed so far. If there is a solution for my issue,...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t3559204-got_purple_stripe_from_lower_edgegot a purple stripe from the lower edge of the screen center to center. gradient to the middle of screen. like 100 lines wide. any hints THANKS michi mMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t3345210-sanyo_projector_projecting_everything_inMy sanyo projector is projecting everything in red and the replace lamp light has come on, I have replaced lamp but it is still red.Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t3308482-plc_xp45lHello, I have a PLC XP45L. As soon as I turn on the projector it goes off. The only light on top of the projector is the READY light. We replaced the lamp last year and probably have around 50 hours on it. Thanks, DavidMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t3099802-put_new_lamp_in_plc_xu83_but_lampput a new lamp in my plc-xu83 but the lamp warning light is still onMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t2190463-sanyo_plc_xp55_quot_new_quot_both_tempThe unit is near new, less than 50 hours on the lamp. I bought it on Ebay from a reputable dealer as a working demo tested but no warranty. It starts normally when the power button is pressed but as soon as the lamp strikes a few seconds later the...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t613232-upside_down_projectionho do i get my projector to project while on a desk it has previously been hanging from a celingMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t568620-sanyo_hd1000_exactiHi, Everything was fine (I thought)... New Camera takes videos well and plays back OIN CAMERA fine. when docking and transferring to exacti and playing on my laptop, the sound is great but the video frezzes after 2 seconds. Previous videos taken last...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t340013-toshiba_tl_s30_projector_project_oneWhen i project using the above projector, all the data,etc. comes thru fine, BUT the projection has 1/2 of the screen blue and the other half normal. I just purchased a new bulb, and that didn't do anything to helpMon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t197063-permanent_coloured_tintMy Sanyo PLC-XU47 Multimedia Projector has developed a problem where the image it projects has a permanent pink tint. This occurs when a computer is attached, but is not present when the projector is displaying its 'idle' screen before a computer is...Mon, 07 Dec 2009 11:39:46 GMThttp://www.fixya.com/support/t102937-projector_randomly_shuts_offHello, After 2 years of use, one of our 2 projectors has started randomly shutting off. It first happened after about 3 hours of continuous use, and now it happens after about 30 minutes. It's done this about 8 times now over the last 2 months, but...Mon, 07 Dec 2009 11:39:46 GMT