Samsung Washing Machines

Samsung Washing Machine Problems & Solutions

• 

  how to replace the door rubber seal and part number

  Here is the door seal to order. Below is a video to show you how to replace the boot. The model may...

  • kwaite
  • Washing Machines
  • 2013-02-17
  • 37 Views

  1 Solution

• 

  my washing machine spins but does not drain, what could...

  If the machine is spinning as hard and fast as it should.... then I can only think that you have a...

  • patti_morris
  • Washing Machines
  • 2013-01-16
  • 260 Views

  2 Solutions

• 

  My Samsung WA5471ABW top- load washer is leaking from...

  You bet there is. But first let's double check some common causes of leaks that may not be located...

  • Oreata Banks
  • Washing Machines
  • 2013-01-13
  • 36 Views

  1 Solution

• 

  I have a Samsung top load washer #WA5451ANW. Will only fill...

  Possible that the cut off to the Inlet valve has failed which means that the controller unit is a...

  • Stacey Lockshaw
  • Washing Machines
  • 2012-12-31
  • 92 Views

  1 Solution

• 

  Samsung front loader not spinning at high speed

  Yes ! this is related to fabric and hair accumulation and so it will be best to check the drain...

  • Donna Smith
  • Washing Machines
  • 2012-12-30
  • 33 Views

  1 Solution

• 

  my washing machine wont start?

  What is the complete model number of your unit?

  • Marjani Bt Abdul
  • Washing Machines
  • 2012-12-07
  • 159 Views

  2 Solutions

• 

  won't spin out

  First, check to see if the drain filter is clear. Post back the results.

  • michael barletta
  • Washing Machines
  • 2012-11-30
  • 163 Views

  1 Solution

• 

  samsung sw68asp manual

  Hello & Welcome to FixYa Please click on this link to download the manual. Please get back if...

  • tim bygate
  • Washing Machines
  • 2012-11-24
  • 2946 Views

  2 Solutions

• 

  I have a Samsung J1045 and it won't stop taking in water...

  You need to replace the water inlet valve.

  • smwandtribe
  • Washing Machines
  • 2012-11-11
  • 94 Views

  1 Solution

• 

  flashing SE and stop running, there is still water inside

  5E errorWATER DRAIN ERROR5E is displayed if the water level frequency detected is 25 KHz or less in...

  • floraida Gonzaga
  • Washing Machines
  • 2012-11-06
  • 167 Views

  1 Solution