Tip & How-To about Computers & Internet

Lost Your Manual?

This is a very short Tip ,
Recently i have noticed that a large percentage off questions asked are about how to get a new manual. So this is where this Tip Comes in

There is a site called manuals online (http://www.manualsonline.com/)
where from there u can download and save manuals for everything



There is a box that says enter product model , This box is self explanatory
after that you should come to a page with all of the downloadable manuals



Click on one of the manuals then click on Get this manual.

I hope this solves all of your lost manual problems!

Posted by on

Computers & Internet Logo

Related Topics:

Related Questions:

1 Answer

I cant get it...cant u please just tell me the answer?????


Nobody can answer your question, because you haven't stated what the percentage is of?

If you multiply something by 4 it is 4 times bigger, so 400% bigger. If you want the percentage of the smaller number in relation to the larger number, it is 25% of the larger number. The actual number figure is irrelevant, because you are just multiplying a whole number by 4.

As I have said many times, to get good answers, you have to ask good detailed questions.

Feb 08, 2017 | The Computers & Internet

1 Answer

No one answers my questions! What good is Facebook?


Hello Bernice

We all answer questions that we know the answers to. I am one of the Facebook experts and happen to be on line tonight. I am also a Fixya moderator, so welcome :>)

I noticed that you posted this to the Wagner Spray Airguns category and this will certainly be the reason you received no response to your previous question about Facebook. Facebook has its own Category and is a busy group. I will edit your previous question to the correct category (I can do that) and we will see what happens. When asking future questions, we just ask that you make them clear what you want and give as much information as you can.

You ask what good Facebook is. Well, it is the top Social Networking site and tool in the world with 40 million subscribers worldwide. It is good for keeping in touch with family and friends and one particular benefit is free phone calls worldwide using the Facebook Messenger App. It is a repository for any pictures that you have, as well as videos that you might take. You can also learn a lot form it and pick up new music and suchlike. I love it!

Jan 24, 2016 | Wagner Air Tools & Compressors

1 Answer

How many gallons of water does the Kenmore elite SM9711174 use in each cycle?


Hello Tricia

Ask them direct, but there are a lot of variables in your question like wash size small, medium or large load, programmes, pre-wash or not, and the absorbency of the laundry in the washer.

All new models are energy efficient, so they use as little water as they can which also reduces electricity use. My Whirlpool had a sticker that said it uses about $25 of electricity a year.

http://www.kenmore.com/search=elite

Dec 31, 2015 | Kenmore Washing Machines

2 Answers

2002 jeep wrangler recently had a new clutch put in,I am starting to have trouble putting it into 1st gear and shifting into 2nd, all other shifting fine.what could it be?


to answers 100% accurately id have to drive it.

but here in net bunny land, cant do that!
but can ask you to post full symptoms.

(trans or clutch issues)
question 1: can you start car in any gear. clutch held to floor, even reverse )
Q2: once started, can you always shift to reverse (the tricky one, gin?) and not grinding and no complaints,balking?
yes/no
yes then your transmission fluid is low.
or worse.
Q3:
is the clutch MC full? and does not drop day by dead week by week???


q4: new clutch
all 5 parts? or more?
PP pressure plate
disc.
throw out bearing
flywheel pilot bearing (oops?)
new slave cylinder? ,mc set

the slave and mc are a fixed pair in 2002.FSM C6-p9
and on my 2008

the slave and MC are one part and pre filled.
there is no bleeding steps only top offs.

if the clutch drags,(seems it does)
put in a new MS/SLAVE first.
avoid the 10hr labor. if a new clutch, 4wd.ad4f429a-1dc7-4f8b-aa26-1116f5bce673.jpg


I have lots more to ask.
trouble putting
so you are driving
and shifting and moving
and 1>2 shifts are what, grinds, or balks.

can you start engine in any gear (clutch to floor)

can you shift any gear parked ,running, and clutch to floor and not moving. including REVERSE ?
if all are good, cept the 1>2 upshift
that means the clutch is not dragging.
and the #2 synchro ring is worn.
or running the wrong trans fluids.

the newer transmissions are very tricky here.
some are very upset with wrong lube. (or too low or is not black as tar)
or mixing 2 brands, or using synthetic and its so slippery the syncrho fails, (cured many like this)

if all this is true, and clutch don't drag (ever)
then get the car to jeep and have them drain it and fill it with the correct lube and win.


now answer 3:
it might be just the shift linkage messed up
if the 1>2 change balks. (not grind)
on mine boxes i can hear the synchro's spin up.
i can feel them engage, if i cant feel that
then the linkage is bad.

the word trouble does not say what that means.
define trouble putting....

find a shop, a Service tech, that owns a m/T box.
and win.
Some with a/t are clueless...
ive blown more clutches racing than many ever drove.
IMO, and remember it COST YOU NOTHING to ask. (I'm retired early, gin!)

Sep 21, 2014 | 2002 Jeep Wrangler

Not finding what you are looking for?

1,333 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Loading...