Tip & How-To about Televison & Video


There is something that you can do safely and it'll cost you just a few dollars, just go to any electronic store(Kmart, circuit city, office depot, best buy etc.) and buy a dvd laser lens cleaner and that might solve your problem.

Posted by on

Televison & Video Logo

Related Topics:

Related Questions:

1 Answer

how do I change/clean the printer head

It sounds to me like it would be cheaper to just replace the printer. if you don't hardly do any printing then a cheap wal-mart printer for around 30 dollars is what you need. if you printer all the time then you need a laser printer and they run between 200 to 600 dollars and can pick one up at Sams club or a office supply store like Office Max or Office Deport. You might also check Kmart. Most people don't realize that they sell printers too.

Dec 30, 2014 | Office Equipment & Supplies

1 Answer

I have mislaid the power cable for my Maxtor OneTouch 4, do you not where I can buy a replacement?

Online: www.eBay.com

Any "big box" store: Office Depot, Radio Shack, Circuit City, Staples, Future Shop, Best Buy, Walmart, or even at some "Nothing Over A Dollar Stores" or maybe at a local "Thrift Store" or "Value Village".

Or, online, through the manufacturer's web-site: www.maxtor.com

Nov 14, 2009 | Maxtor OneTouch II external hard drive...

2 Answers

Pads on MDR-V300 need replacing

I've found replacement headphone pads at all of the electronic store outlets as well as WalMart, Big Lots, Dollar Stores, Kmart, etc.

Aug 02, 2009 | Sony Audio Players & Recorders

1 Answer

my TV doesn't show the image/picture

ya thats the standard line from the twenty somethings at the stores now suddenly 15 years of crt tvs all magically have bulbs like a dlp tv these are the same people that they interview on the street and ask who the president of the united states is your tv was originally made by samsung if you read the sticker on the back no user serviceable parts... its kinda like the tag on a pillow any way there is circuit board with two parts on an aluminum heatsink unplug the tv of course take off the back panel and uplug the red plug from the circuit board with the two black modules labeled stk392-040 this whole board can be replaced for 70 dollars parts store dot com

Dec 07, 2006 | Akai PT4298HD Rear Projection Television

4 Answers

DVD Player won't read

I have to disagree with the previous answer you got. It's a common scenario that someone uses his DVD player to play CD's and then the point is lost. DVD players DO get plagued with dusty lenses, same as any other disc player. If you can get to the lens its worth a try, but from your post it seems that you should take it to a pro lab. I say this because you'll have to open the TV chasis to get there, and TV's are just about the most dangerous home appliance to mess with. Touch the wrong spot, even when plugged out, and you can get bit by enough voltages to kill. Take care and good luck

Mar 22, 2006 | Sharp 27DV-S100 27 in. TV/VCR/DVD Combo

Not finding what you are looking for?

499 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75581 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

80608 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions