Tip & How-To about HP DeskJet 5550 InkJet Printer

Bottom Two Lights Flashing

Was printing recently and paper tray ran empty. Then cartridges jammed to the right side and bottom two lights flashed continuously, in spite of disconnecting power, restart, etc. Finally, in attempt to change ink cartridges, pushed down on housing for ink cartridges and heard a click. They were jammed in the far right position. Restarted printer and all worked fine. Not very techy, but it worked!

Posted by on

HP DeskJet 5550 InkJet Printer Logo

Related Questions:

1 Answer

Epson Stylus PHOTO R220 red lights keep flashing


I hope this will help you :)
* Green Power light flashes- The printer is receiving a print job, replacing an ink cartridge, charging ink, or cleaning the print head.
* RED paper light is On- If the CD/DVD try guide is open, close the CD/DVD tray guide, load paper, then press the paper button. Your paper ran out or multiple sheets loaded at the same time . Load paper and press the paper butoon to resume printing.
* RED paper light flashes- Paper is jammed in the printer. Press the paper button to eject the jammed paper. If the light is still flashing , open the cover and remove all paper, including any jammed or torn pieces. Then reload paper and press the paper button to continue printing.
* RED Ink Light Flashes - One or more cartridges are low on ink. Check the message that appears on your screen to determine which cartridge is low, or follow the instructions in " Checking the Ink Supply". Make sure you have a replacement cartridge.
* RED Ink Light is ON- One or more cartridges are out of ink or not installed. If you have just installed a new cartridge, it may be incomaptible with the printer or incorrectly installed. Reinstall it or replace it with the correct cartridge
* RED Ink and RED paper lights flash alternately- The CD/DVD tray guide was left open when you turned on the printer or when printing on paper. Just simply close it/
* Green Power Light is Off; RED paperand RED Ink Lights flashing- Paper may be blocking movement of the print head. Turn off the printer, then open the cover and remove any jammed paper or other foreign objects. Turn the printer back on again. Or it may have an internal error. Turn off the printer, wait a few seconds, then turn it on again.

Jul 06, 2011 | Epson Stylus Photo R220 InkJet Printer

2 Answers

4TH LIGHT FROM THE TOP KEEPS COMING ON LEXMARK E232


What this light sequence means that the printer has a paper jam.

When a paper jam occurs, the printer stops and the operator panel's Paper Jam light and Continue button lights come on. Press and release Continue twice quickly to display the specific secondary error paper jam light sequence.


How to clear Paper Jam

Press Continue button twice quickly to see the secondary error code.


To get the secondary error codes

When the Error light (!) and Continue button lights are both on, a secondary error has occurred.

When the Paper Jam light (4th light) and Continue button lights are both on, a paper jam secondary error has occurred.

Press and release Continue button twice quickly to display the secondary error code light sequence.


Press Continue button to resume printing once all the jammed pages are cleared from the paper path.

We recommend that you clear the entire paper path when a paper jam occurs.


To clear a paper jam:


1 If you are feeding paper from a tray, remove the tray, and then remove any jams.

2 Open the front cover and remove the print cartridge assembly.

NOTE: Do not leave the print cartridge assembly exposed to direct light for an Extended period of time. Extended light exposure can cause print quality problems.

3 Remove any jams in the area behind the print cartridge assembly.

4 Lift the flap at the front of the printer and remove any jams beneath the flap.

5 Open the rear exit and remove any jams.

6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer covers and trays are closed, and then press Continue button to resume printing.

NOTE: The printer reprints the pages that caused the paper jam.

Jun 30, 2011 | Lexmark E232 Laser Printer

2 Answers

Light is flashing on Resume on my HP Deskjet F2110 All-in-One printer scanner copier. What does that means?


Regular paper, envelopes, or specialty media may get stuck or jammed in the printer. Follow the instructions below to find and remove jammed paper (or other media) from the printer. If the HP All-in-One has a paper jam, first check the rear door. If the jammed paper is not in the rear rollers, check the front door.

Step one: Check for and remove any paper stuck in the paper In tray

  1. Remove all loose paper from the paper In tray.
  2. Press the RESUME button.
    • If the paper jam is cleared, skip to Step Four
    • If the paper is still jammed, continue on to the next step below.
  • If more than one sheet is stuck in the printer, remove the paper, one sheet at a time by taking hold of a sheet in the middle of the stack and, with both hands and firm, even pressure, pull the sheet towards you. Usually, removing one or two sheets from the middle of the stack will release the pressure and the rest of the stack can be removed.
  • After removing the paper, check to make sure no scraps of paper are stuck in the printer.
    • If the paper jam is cleared, skip to Step Four.
    • If the paper is still jammed, continue on to the next section.

  • Step two: Clearing a paper jam from the back of the printer

    If the paper jam is not accessible from the In tray, follow the instructions below to clear the paper from the back of the printer.
    1. Unplug the HP All-in-One.
    2. Press in the tab on the left side of the rear door to release the door. Remove the door by pulling it away from the HP All-in-One. Figure 1: Removing the rear door

    b4334db0-9c6c-4a8d-be58-38a7346f3e8c.jpg

    1. Gently pull the paper out of the rollers. caution.png
      CAUTION:If the paper tears when removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If all of the pieces of paper are not removed from the HP All-in-One, more paper jams are likely to occur.
    2. Replace the rear door. Gently push the door forward until it snaps into place.
    3. Press Cancel to continue the current job.
      • If the paper jam is cleared, skip to Step Four
      • If the paper is still jammed, continue on to the next section.

    Step three: Lift the front cover and slowly remove any jammed paper

    1. Unplug the power cable.
    2. If necessary, pull the input tray down to open it. Then, lower the print cartridge door. Figure 2: Lowering the print cartridge door

    355b6f41-4668-4827-a91c-ff5c4852e74f.jpg

    1. Gently pull the paper out of the rollers. caution.png
      CAUTION:If the paper tears when while removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If all the pieces of paper are not removed from the HP All-in-One, more paper jams are likely to occur.
    2. Close the print cartridge door.
      Figure 3: Closing the print cartridge door

    4b07607d-706b-46d4-8067-d6d9c380a6ec.jpg
    1. Plug the power cable into the HP All-in-One.
    2. Turn the power on.
    3. Press Start Copy Black or Start Copy Color to continue the current job.

    Step four: Verify the print cartridge carriage can move freely

    1. Unplug the power cable.
    2. Check to see if the print cartridge carriage can move freely from one side of the printer to the other. If the carriage is to the right and out of plain view, skip to Step Five. Do not try to force it to move if it is hung up on something. [img src="http://h10025.www1.hp.com/ewfrf-JAVA/Image/common/note.png" alt="">
      NOTE:Be careful not to force the print cartridge carriage. If the carriage is stuck, forcing it to move will damage the printer.
      • If the carriage does not move, continue with the next step below.
  • Remove the print cartridges.
  • Step five: Reload and test the printer

    Once the jammed paper is removed, verify that the printer is still functioning properly.
    1. Reload the printer with plain paper.
    2. Perform a self-test by pressing and holding the Resume button until the printer starts printing. A test page should print.
    note.png
    NOTE:Do not put more than 35 sheets of plain paper in the document feeder tray.
  • Gently move the print cartridge to the far right of the printer.
  • Remove the paper from the paper In tray, but do not remove the drawer.
  • Remove the rear access door.
  • With your fingers, rotate the rollers "up" three full rotations.
  • Push the rear access door back into the printer until it snaps firmly into place.
  • Replace the print cartridges.
  • Plug the power cable into the HP All-in-One.
  • Turn the power on.

  • Step six: Service the printer

    Perform all the steps mentioned above. If the problem continues, service the printer.
    Cause Paper jams can be caused by several factors. Follow these guidelines to prevent further paper jams.
    • Insert paper into the paper tray only until it meets resistance. Do not push it farther in.
    • Make sure that the paper is flat in the paper tray and that the guide is adjusted to the width of the paper.
    • Do not add paper while the product is printing.
    • Remove printed pages frequently.
    • Do not use paper that is too thin, too slick, or that stretches.
    • Do not use torn or creased paper. Used paper might cause jams.
    • Make sure that the rear access door is securely fastened.

    Jun 17, 2011 | HP Deskjet F2210 InkJet Printer

    1 Answer

    My HP psc1315 will not turn on. Some of the


    Hi,


    To be able to understand the problem, you should give extra info about the lights.
    Please find the information below about the status lights that provide information about error conditions of your printer. But first you need to install the driver for your operating system. The drivers are necessary to print documents and scan images. These drivers must be installed to use the print and scan features.

    0b0f1f4.jpg
    If the On light, Check Print Cartridge light, Check Paper light, and Start Copy, Black and Start Copy, Color lights are all flashing, do the following:

    1 Verify that the front-panel overlay is attached to the HP PSC.
    2 Turn your HP PSC off and on by disconnecting the power cord and reconnecting.



    Problem 1: “ON” light is on, “check paper” light is blinking and “check print cartridge light” is off .

    Explanation 1: The paper tray is empty, the HP psc has a paper jam, or the paper size setting and paper in paper tray are not the same.

    Solution 1:
    • Load paper, or remove thepaper jam.
    • Change paper in paper tray to correct size.
    • Change paper size on the computer software.
    Then press On/ Resume to continue.

    NOT : PLS SEE THE NEXT MESSAGE. CONTINUED AS THE COMMENTS BELOW:

    Mar 31, 2010 | HP PSC 1315 All-In-One InkJet Printer

    1 Answer

    Flashing light


    Here is what HP has on the subject of the triangle light flashing:
    c00028322.gif 1 - Attention Light 2 - Ready Light 3 - Go Light Figure 2: Printer light key c00028323.gif 1 - Symbol for light off 2 - Symbol for light on 3 - Symbol for light blinking
    c00028328.gif Door open, media out, no print cartridge, or media jam

    The printer is in an error state that requires operator intervention or help. Check the following:
    • The print cartridge door is completely closed.
    • Media is loaded.
    • The print cartridge is correctly installed in the printer.
    • There is no media jam.

    Figure 8: Paper jam c00028328.gif 13.JJ.NT JAM IN TRAY 1

    13.JJ.NT JAM IN TRAY X

    The Attention LED is blinking. Check paper loading then open and close top cover.

    When there is a jam in tray 1, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored.

    When there is a jam in tray X, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored. These are the error explanations for just the flashing triangle light, there are many more, but none for just the flashing triangle.

    If the light pattern is different let me know (other lights on as well)
    -Hope this helps.

    May 28, 2008 | HP LaserJet 1012 Printer

    Not finding what you are looking for?

    2,640 people viewed this tip

    Ask a Question

    Usually answered in minutes!

    Top HP Office Equipment & Supplies Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Seeker5211
    Seeker5211

    Level 3 Expert

    1089 Answers

    kakima

    Level 3 Expert

    102366 Answers

    Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Loading...