Tip & How-To about Computers & Internet

Use Supported Equipment Whenever You Can

Even admitting we are generally tempted to use unsupported/non-certified accessories in adjustment to save money or because we artlessly like one accessory over another, if that accessory isn't certified to action appropriately with the arrangement you are installing it may not absolutely accomplish properly. A acceptable archetype of this is that all buzz apparatus paging and intercom abnormally and affairs a non-supported buzz with an IP PBX could beggarly your barter don't accept the adeptness to use that feature.

Posted by on

Computers & Internet Logo

Related Topics:

Related Questions:

1 Answer

I'm buying a car from Florida and I live in Portland. The seller has set me up with EBay buyer protection. Is this a legit way to do business?


eBay's Vehicle Purchase Protection covers only certain vehicle transactions that are completed ON eBay.com. If a Craigslist or non-eBay seller 'promises' you the eBay protection plan, this is ***** and you should walk away. ... Vehicles advertised well below what it is worth may be tempting, but should be a red flag.

Jan 27, 2018 | eBay Computers & Internet

1 Answer

Tighten belts on my Yard machine ride on lawn mower


There is rarely any adjustment to tighten the belts on a riding mower. The belts are tensioned by an idler pulley which is controlled by a idler pulley spring. Almost all riding mower belts must be accurate to the hundredth of an inch or no less than accurate to 1/8th inch. It is very rare for a belt to be in full inch increments. This is why automotive or general purpose belts will not work on a riding mower. I know it is tempting to try to get by with a $10 belt rather than spending $35 or more for the correct belt. Trust me, you will only waste your money trying to get by with the inferior belts. Riding mower belts and extra heavy duty and generally will not stretch at all. Generally they will have 5 or more strands of a Kevlar type material so that stretching is virtually non existent. If the belt will not tighten then it is most likely not the correct belt. If the belt is in fact the proper belt and still is too loose, then you should look for pulley wear or weak tension springs. Metal pulleys do wear and tension spring do loose tension.

Sep 12, 2009 | Mtd Garden

1 Answer

Sony KP-51HW40 Convergence issue


Can you adjust the convergence by the convergence menu without going through the service menu? The settings through the convergence menu should save automatically. Have you replaced the convergence ICs? If so the settings should save, if not the D board will need to be replaced or at the very least rebuilt. Let me know if you need further assistance with this issue.

Apr 10, 2008 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?

878 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Loading...