Tip & How-To about Pioneer AVH-P5700DVD Car DVD Player

Parking break bypass

Just run the parkingbrake wire into one side of a toggle switch, and grond the other side of the toggle switch, When the WARNING pops up on the screen, just flip the toggle on then off then hit OK on the screen, Youll be good to go

Posted by on

Pioneer AVH-P5700DVD Car DVD Player Logo

Related Topics:

Related Questions:

1 Answer

Wired in 5224 switch using (1) white wire and (3) black ones and it popped the breaker. I switched the wires and now both toggle switches control same light. The previous switch controlled a light and a garbage disposal.


10-25-12
Copy following link for wiring diagrams for Leviton double switch.
http://waterheatertimer.org/How-to-wire-switches.html#double

Only 3 wires will connect to switch. Not 4

If you blew breaker than you connected Neutral wire to switch.
Neutral wire never connects to switch.

Identify Hot wire.
There is only one Hot wire that carries power to switch box.
This wire connects to one side of device ... which side? ... the side where both screws are bonded together.

Oct 25, 2012 | Leviton Electrical Supplies

1 Answer

i just bought two flood lamps to fit to the bumper of my 95 jeep wrangler, how would i wire them to a toggle switch?


  1. 2-wires on each fog ligth
  2. toggle switch 2-hook up
  3. okay run hot wire from battery to one side of toggle
  4. on fog ligths one wire migth be white or black
  5. take one of the wire on fog ligth (white)&other fog ligth (white)wire
  6. take a wire hook both white wire from both ligths an hook to this wire an run it to the other side of toggle
  7. black wire on ligths hook them to ground
  8. after you hook the ligths up an they work it best to put a fuse connector between one of the wires on toggle

Dec 06, 2010 | Jeep Wrangler Cars & Trucks

1 Answer

I want it bypassed, so I can play dvds in motion.


  1. Install a toggle switch in your car.
  2. Run 1 wire to the Brake Wire coming out of your Head Unit Wiring Terminal.
  3. Run the other wire to a ground.
  4. Turn on the vehicle, insert a DVD, and then flip the switch after the warning comes on the screen.

Aug 06, 2010 | Car Audio & Video

1 Answer

i cant watch dvds on it what wire do hook up to what.


Take the green parking light wire and put it to 1 side of a toggle switch, ground the other side of the toggle switch. Put dvd in wait for warning screen, flip toggle swithc off, then on. You should be all set.

Jul 17, 2009 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

on my touch screen came out the view video while driving warning i cant get it off can you help?


unhook your E-Brake wire and do the following:(2 options depending on DVD Unit)

If you have the old firmware then all you need to do is ground the parking brake wire
OR
if you have the new firmware(just bought the system) a toggle switch is involved:
1 - connect e-brake wire from dvd unit to the switch
2 - connect a ground wire from switch to the unit chassis(any good metal grounding surface will do)
3 - pop in a dvd, toggle the switch back and forth 2 or 3 times depending on what wire you placed where...and voilaa!! your dvd system should work in motion!!

Jul 01, 2009 | Jensen's VM9312 Car DVD Player

Not finding what you are looking for?

1,798 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Loading...