Tip & How-To about Clothing

Zega Apparel: Defining Custom Clothing Manufacturers

At Zega Apparel we never lose track of our origins, as it defines our very journey and who we were and where we are headed towards in the future. So today we would like to visit our roots and bring forth with it a new zeal that can lead us on the road to greater accomplishments and milestones.
Perhaps what resonated more with the title of our post today, is none other than the phrase first used in 1902, made to order, which literally translates to some commodity that is made specifically as per a person's demand and wishes. However, over the years, as it happens with all things that face the test of time, this phrase and its counterparts became muggy and the distinction for its particular use was lost. At Zega Apparel we never lose track of our origins, as it defines our very journey and who we were and where we are headed towards in the future. So today we would like to visit our roots and bring forth with it a new zeal that can lead us on the road to greater accomplishments and milestones. Let's take a look at how we would like to define ourselves and others who presume themselves to be worthy of being called as one of the best custom clothing manufacturers at present times.
Diversity Personified
For any product to be customized, it depends greatly on the ability of the service provider of how they are able to manage a diverse workflow and its management. Customization isn't an easy to attain attribute and we find many businesses in today's world finding themselves to have become stagnant due to the restrictions they have placed on their own operations. These self-imposed limitations regarding the undertakings of a new project bring them to a halt, like invisible chains that deter them from achieving their true potential. Clothing is a line of business where diversity of products can become the driving factor behind the freedom your setup needs to stay fresh and alive over time.
Innovation Becomes Inevitable
For any business to succeed nowadays, innovation and technology pave the way to not only aiding them to survive and staying relevant, but it also keeps them moving forward while enduring the test of time. Thus, at Zega Apparel we keep on testing our methodologies and stick with the recognized and do away with redundancies. However, what really keeps us moving are the newfound ways of improving our operations and delivering the impeccable for our customers' delight and updating our own track record for delivering the impossible. We have observed that what really crushes out the competition is the will to thrive, and whoever delivers on an unyielding resolve, becomes the gamechanger within the industry. So far, our team has shown a never back down spirit and we readily accept challenges head-on without compromising the quality of our work.
Creative Arts as the Centerfold
There is no doubt that prosperity of a clothing line manufacturing establishment, heavily implies on creativity and the ability to materialize thought processes into the real world. Though it sounds much simpler when we say it, it is indeed easier said than done. Even though imagination has no bounds, it is the reality check every business must go through when they find their resources limited to deliver an order. Hence for this sole reason, Zega Apparel defines its task force by taking an edge over creativity and seeking favorable options whenever a challenging order arises. It is our fuel for excitement, and our dedicated and committed team works tirelessly towards meeting deadlines. Our appeal towards creativity pushes us to go out of the box at times, in fact, several times, to surprise our customers with a WOW effect that other simply cannot deliver.
Though there are many out there who label themselves as a highly customized service provider, we at Zega Apparel know what truly matters and that is to meet customer demands at full so that we can truly deliver a product that is made to order.

Posted by on

Clothing Logo

Related Topics:

Related Questions:

1 Answer

Oil sludge found in Air Cleaner, replaced PCV and filter and cleaned and had to replace filter in 6 months due to yellow oil sludge


Oil sludge can be caused by a few different things. I don't think you have head gasket/head problems as you say you've been using the vehicle for 6 months.

However, do check your oil dipstick and see if the same sludge (also known as 'mayonnaise') is on it. Mayonnaise on a dipstick is a symptom of a defective head gasket that is allowing coolant into the oil system.

If your vehicle looses/uses coolant this may be a sign of a faulty head gasket/head.

Very short- repeated - journeys can allow sludge to form, simply because on short journeys the engine does not reach its normal operating temperature. The engine is 'cool'.

It can also be caused by a faulty thermostat. If the thermostat is jammed in the open position it can take a long time for the engine to reach normal operating temperature. Other than changing the thermostat (maybe for one that opens at a higher temperature - a 'winter' thermostat) there's no practical way of checking it. Replacement is the easiest and cheapest option. It's not a difficult job.

It's not unknown for a thermostat to have been removed by a previous owner (for various reasons..). If you're going to check if there's a thermostat there - replace it anyway.

If you're not losing/using coolant and there's no mayonnaise on the dipstick it may well be due to repeated short journeys where the engine doesn't reach normal operating temperature - or the thermostat.

Feb 05, 2016 | Cars & Trucks

1 Answer

Peugeot 206 temp gauge issue


Make sure the coolant level is correct. If it is, could be a bad water pump or a clogged radiator. Check the radiator to see if it looks like the inside has a lot of scale and deposits. Remove some coolant if necessary. If the radiator looks relatively clean , could be a bad pump.

May 06, 2014 | 2006 Peugeot 206 1.4

1 Answer

My wife's Suzuki Vitara (GV 1.6, 2003) is losing water and we cannot find any sign of an external leak. Someone suggested the head gasket is the problem but my mechanic is very doubtful about that but is scratching his head now! We lose most of the reservoir on a 60 mile journey. Any ideas please?


Pressure test the cooling system. The head gasket possiblity can be tested with dyes, or testing for exhaust gases in the cooling system.
What happens in this case is combustion gases escape into the cooling system and push coolant out, usually when under load, driving...If this is what is happening, the fix can be fairly costly.

Sep 16, 2010 | 2003 Suzuki Grand Vitara

1 Answer

Tracking


A CONSTANT streak anywhere on the screen could be a scratch in the tape itself. Losing sound, and ocassionally everything going to black and white, sounds like a dirty control track head.(The audio and control track are in the SAME head (a 3/4" metal cube that the videotape travels on). The control track section is on the upper part, and the audio on on the lower part.

If the control track head's dirty I'm sure the rotary head's dirty too! Losing audio and have tracking problems, point to dirt. And you MAY have SO much dirt built up on that head it's scatching your tapes (unrepairable), and causing you problems. Make sense?

Mar 16, 2008 | Sylvania 6260VF VCR

1 Answer

Tracking won't zero in


try cleaning the heads with a head cleaner or even a high grade blank tape letting it play for 20 mins.
hope it helps
wg

Feb 02, 2008 | Sylvania DVC840F

Not finding what you are looking for?

369 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Clothing Experts

Erin Wood
Erin Wood

Level 3 Expert

652 Answers

ray gallant
ray gallant

Level 3 Expert

61719 Answers

Bill Boyd

Level 3 Expert

53745 Answers

Are you a Clothing Expert? Answer questions, earn points and help others

Answer questions

Loading...