SERVCIE MODE AND WHITE BALANCE ADJUSTMENT

WHITE BALANCE ADJUSTMENT
Note: Please execute this adjustment if necessary.
Change Data of "VPC" service mode. ("006 WB" category)
a. Press "1" or "4" on remote to select WB adjustment menu.
b. Change data by pressing "3" or "6". Each range of these items is 0~255.
c. Press "mute" +"0" on remote to save the data.
"SERVICE" comment is changed to "WRITE", indicating writing process.
d. After a while, "WRITE" comment returns to "SERVICE", which means writing process is done.
VCOM ADJUSTMENT
Note: Please execute this adjustment if necessary.
1) Change Data of "Digital" service mode.
a. Select "003 DIG_SRV_MODE" category by pressing "2 / 5" on remote.
b. Press "0" to go to "TEST PATTERN" Mode.
c. Press "Enter" or "12" to go into Video TEST PATTERN.
d. Press "7" or "8" to select the test pattern.
e. Press "Enter" or "12" twice to show the VCOM TEST PATTERN. continue reading>>>>>>> www.electro-medical.blogspot.com