Tip & How-To about Sony Kdl-32l504

SERVICE MODE AND DISASSEMBLING

SERVICE MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY > Channel 5 > Volume + > POWER .
If you wish to get some details; and disassembling process circuit check the site linked here. Pull up older posts
http://electro-medical.blogspot.in/
google.com/+AjinGopakumar

Posted by on

Sony Kdl-32l504 Logo

Related Topics:

Related Questions:

1 Answer

HOW DO I RESET THE LAMP TIMER ON A SONY KDF55WF655


Procedure for resetting your lamp timer,

Use the Remote Commander to put the set into service mode to display the service menus.

1. TV must be in standby mode (Power off).
2. Press the following buttons on the Remote commander within a second of each other: DISPLAY ==> Channel 5 ==> Volume + ==> POWER. The first service menu (TV) displays.

To reset the Lamp Timer:
1. Press the JUMP button 3 times on the remote to get to the Panel OSD mode.
2. Next press the remote channel 2 button 9 times to get to the Lamp Timer mode.
3. Press the remote 3 button, mute, then enter to reset the timer to zero.

It will take 45-50 seconds for the timer to reset. After the timer is reset you can shut the TV off. The lamp timer will remain reset (no need to save).

Jun 30, 2011 | Sony Televison & Video

2 Answers

i don't know the model code


Hello

You are a technician and you whats to know the model service code I thinks, and posts this solution.

Use the Remote Commander (RM-Y183, RM-Y184) to perform the circuit adjustments in this section

SETTING THE SERVICE ADJUSTMENT
MODE

1. Standby mode (Power off).

2. Press the following buttons on the remote commander within one

second of each other:
DISPLAY Channel 5 Sound Volume + Power

READING THE MEMORY

1. Enter into service mode.

2. Press 0 on the remote commander.
3. Press ENTER to read memory.

ADJUSTING THE PICTURE

1. Enter into service mode

2. Press 2 or 5 on the remote to select the device item.

3. Press 1 or 4 on the remote to select an item.

4. Press 3 or 6 on the remote to change the data.


RESETTING THE DATA

Note: Be careful when using the remote! It will clear and re-initialize

ALL NVM data including defl ection adjustment data if not reset
properly as follows:
5. Press MUTING then ENTER to write into memory.

RESETTING THE DEFLECTION NVM DATA

1. Enter into service mode.

2. Press 7 , then MENU, and then press ENTER on the remote.

RESETTING THE SYSTEM NVM DATA

1. Enter into service mode.

2. Press 7 , then 9 , and then press ENTER on the remote.

RESETTING THE SYSTEM NVM DATA

1. Enter into service mode.
2. Press 8 and then press ENTER on the remote.

MEMORY WRITE CONFIRMATION

METHOD

1. After adjustment, pull out the plug from the AC outlet, then replace the

plug in the AC outlet again.

2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confi rm they were adjusted.
Ok.

Nov 30, 2010 | Sony KV-32XBR250 TV

2 Answers

Still getting "Projection lamp is nearing end of life"


KDF46E2000 - Change Lamp Warning - Reset

Bulb is most likely OK. Original bulb in Sony TV is Philips, label on bulb usually says Philips. Sony don't make bulbs. Sony Cost is usually 1.5 times other sources. Many shopping cart operations sell condemned, reject or poor quality electronic service items because cost of return and fooling with them is excessive. This is obvious and widespread with convergence ICs and other parts.

Lamp timer needs reset. This is usually an automatic function. TV detects Increased lamp current from previous failed bulb or weak bulb condition and resets automatically. TV must be unplugged for lamp replacement for this to work. Occasionally it must be reset manually, as below:

1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY Channel 5 Volume + POWER .1. Access Service Adjustment Mode and select the Service Menu that
contains the Category with the Adjustment Item you want to change.
2. To change the Category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the
Service Menu displayed. To change a Category on one of the other
Service Menus, press the JUMP button until the correct Service
Menu is displayed.
3. To change the Adjustment Item, press 1 or 4 on the Remote
Commander.
4. To change the Data Value, press 3 or 6 on the Remote
Commander.
Note: To go back to the last saved Data Value, press 0 then ENT
on the Remote Commander to read the memory.
5. To save the changes, press MUTING then ENT to write into
memory.
6. To exit service mode, turn the power off by pressing POWER .
Wait 2 minutes before restarting the set to allow the fans to
completely shut down or the Service Menu will appear on the screen.

easyab

ConvergenceRepair.com
__________________

Feb 27, 2010 | Sony KDF46E2000 46" Projection HDTV

1 Answer

service menu


Hi,
How to Enter Service Mode
1. Turn on the main power switch to place this set in standby
mode. (LED will light in red.)
2. Press the buttons on the commander as follows, and enter
service mode.

PRESS these buttons in sequence

ON SCREEN DISPLAY---> (DIGIT 5) ---> (VOLUME +) --->STANDBY

Method of Cancellation from Service Mode
1. Set the standby mode (Press “ (TV STANDBY)” button
on the commander), then press “ (TV STANDBY)” button
again, hereupon it becomes TV mode.


Thanks

Oct 29, 2008 | Sony KP-53HS30 53" Rear Projection...

Not finding what you are looking for?

2,321 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Loading...