Tip & How-To about iRobot Mirra 530

IRobot Mirra 530 Setup

Setting up your Mirra 530 is easy!

  1. Use the power supply at least 12 feet from the pool
  2. Plug the cable into the power supply
  3. Place your Mirra in the pool, rocking it side to side to release air
  4. Once Mirra has sunk to the bottom, plug in the power cord into a grounded outlet
  5. Press the "Clean" Button on the power supply.

Mirra will start the cleaning cycle!

Posted by on

iRobot Mirra 530 Logo

Related Topics:

Related Questions:

1 Answer

Where can I purchase a new power supply for my Mirra M-160

Go to http://www.suntekpc.com/
I found this for my unit. http://www.suntekpc.com/htm-2/power-supply-ps-flex-81x-flex-atx-fan-blow-out.htm
FLEX ATX Switching Power Supply
FSP150-50PL (FSP150-50PL-B Flex ATX)
WxHxL: 3.2x1.6x6-inch (81.5x40.5x150mm)

I sent email to simon@suntekpc.com for pricing and sure way to see if power supply is out.

May 26, 2010 | Mirra M-160 (M020160) Server

Not finding what you are looking for?

638 people viewed this tip

Ask a Question

Usually answered in minutes!

Top iRobot Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1368 Answers

Bill Jordan

Level 2 Expert

372 Answers

David Spradling
David Spradling

Level 3 Expert

6889 Answers

Are you an iRobot Pool and Spa Expert? Answer questions, earn points and help others

Answer questions