Tip & How-To about i-mate Jama 101 Smartphone

Safety Information

Important Safety Information

Please read the following information carefully before you start using your
device to avoid any damages caused by improper usage:

  1. The device is partially charged when you take it out of the box.
  2. The battery should be charged for at least 8 hours before first use.
  3. Please use the charger supplied. Do not remove the battery while charging.
  4. Do not use batteries which have not been specified by the manufacturer, as this may cause leakage or rupture, or personal injury.
  5. Do not charge the battery with an unspecified AC Adapter, as this may cause damage to both the device and the battery.
  6. When discarding the batteries, dispose of them in a proper manner, according to the battery manufacturer's instructions and your local laws.
  7. Power off the device and remove the battery before inserting SIM card. Make sure the SIM card clips correctly into the SIM socket.
  8. Do not open or tamper with the device cover.
  9. Do not press hard on this product, as it may cause damage to the screen or theinternal components,

Posted by on

i-mate Jama 101 Smartphone Logo

Related Topics:

Related Questions:

1 Answer

# 60758 Solar dragon fly lights. Is there a way to make them stop falshing?


Warning Warning Assembling Solar Powered Dragonfly Humming Bird and...
Your author recently purchased some decorative garden lights at a garage sale and found that they could have endangered his family. Being a typical man, he took the lights out of the box and assembled them without reading important safety warnings in the owner's manual. Fortunately providence offered protection despite such negligence. As a public service, we have provided the opportunity for others to avoid such hazards. Please read below the fold for some important safety information.

The owner's manual for these garden lights actually lists the following hazards to be considered during assembly:
Important Safety Information
  • Assemble only according to these instructions. Improper assembly can create hazards
  • Wear ANSI-approved safety goggles during assembly
  • Keep assembly area clean and well lit
  • Keep bystanders out of the area during assembly
  • Do not assemble when tired or when under the influence of drugs or medication
  • Position battery in proper polarity and do not install batteries of different types, charge levels, or capacities together
  • WARNING: The brass components of this product contain lead, a chemical known in the State of California to cause birth defects (or other reproductive harm). (California Health & Safety Code Section 25249.5 et. seq.)
  • This is not a toy.
  • Do not allow children to play with or near this item
  • Use as intended only

The manufacturer went to great lengths it seems to bring such a product to homes and gardens in America. A lot of good men were lost. Hopefully future customers wanting happy, colorful garden night lights will be safe and the past sacrifices of these unsuspecting men, too eager to assemble butterflies without reading the directions first, will not have been in vain.
By Darren Smith

May 22, 2015 | Cars & Trucks

2 Answers

CD tray opens and shuts fine. With CD loaded and shut the screen still says NO DISK. These are disks which have always played without problem on this CD player. Is there anything I can try before taking it in for repair?


When the CD player loads properly and still reads as no disk this indicates that the player lens (Optical device which reads the disk information) Is either dirty or bad. The only option you have is to get a disk lens cleaner and run it on the system. Once you run it, it is supposed to work if the lens is not spoilt. Otherwise you will just have to replace the lens by taking it to a repairer.
Hope this solution has been helpful?

Jan 17, 2011 | Audio Players & Recorders

1 Answer

i dont want yahoo email any more i want to delete it completely


Sign in to the account you want to remove, and please click here to delete it:
https://edit.yahoo.com/config/delete_use...

Now just follow the steps to remove your account. Please be sure to read each page carefully, as important information about your account and account information is included

Best of Luck to You...

Dec 01, 2010 | Computers & Internet

1 Answer

i have error code number 11in my ricoh fw780 when i saw the service manual it asked me to look into the main switch or the main board please help me if i need to replace the main switch and hou to get it


PDF manual URL http://files.mail.ru/CNREX9
Detailed instructions for use are in the User's Guide.
FW780 Operating Instructions Zfah010e.eps Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH COMPANY, LTD. 15-5, Minami Aoyama 1-chome, Minato-ku, Tokyo 107-8544, Japan Phone: +81-(0)3-3479-3111 FW780 Operating Instructions Overseas Affiliates U.S.A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B.V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. Ricoh House, 1 Plane Tree Crescent, Feltham, Middlesex, TW13 7HG Phone: +44-(0)20-8261-4000 Germany RICOH DEUTSCHLAND GmbH Mergenthalerallee 38-40, 65760 Eschborn Phone: +49-(0)6196-9060 France RICOH FRANCE S.A. 383, Avenue du Général de Gaulle BP 307-92143 Clamart Cedex Phone: +33-(0)-821-01-74-26 Spain RICOH ESPAñA S.A. Avda. Litoral Mar, 12-14, 08005 Barcelona Phone: +34-(0)93-295-7600 Italy RICOH ITALIA SpA Via della Metallurgia 12, 37139 Verona Phone: +39-045-8181500 Hong Kong RICOH HONG KONG LTD. 21/F., Tai Yau Building, 181, Johnston Road, Wan Chai, Hong Kong Phone: +852-2862-2888 Singapore RICOH ASIA PACIFIC PTE.LTD. 260 Orchard Road, #15-01/02 The Heeren, Singapore 238855 Phone: +65-830-5888 Printed in Japan AE AE B048-8608 Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Notes: Some illustrations might be slightly different from your machine. Certain options might not be available in some countries. For details, please contact your local dealer. Warning: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Two kinds of size notation are employed in this manual. With this machine refer to the metric version. For good copy quality, Ricoh recommends that you use genuine Ricoh toner. Ricoh shall not be responsible for any damage or expense that might result from the use of parts other than genuine Ricoh parts in your Ricoh office product. Power Source 220V - 240V, 50/60Hz, 7A Please be sure to connect the power cord to a power source as above. For details about power source, P.76 "Power connection" Where symbols are used on or near switches, they mean an under in accordance with IEC 60417: a means POWER ON. c means STAND BY. Copyright © 2001 Ricoh Co., Ltd. Safety Information When using your equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. R CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. i R WARNING: · Connect the power cord directly into a wall outlet and never use an extension cord. · Only connect the machine to the power source described on the inside front cover of this manual. · Avoid multi-wiring. · Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary. These actions could cause an electric shock or fire. · Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur. · Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged. · Make sure the wall outlet is near the machine and freely accessible so that in event of an emergency it can be unplugged easily. · Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following conditions exists: · You spill something into the equipment. · You suspect that your equipment needs service or repair. · Your equipment's cover has been damaged. · Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock, explosion or loss of sight. If the machine has laser systems, there is a risk of serious eye damage. · To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than those specified in this manual. · Some parts of the machine are at a high voltage and could give you an electric shock. Also, if the machine has laser systems, direct (or indirect) reflected eye contact with the laser beam may cause serious eye damage. When the machine needs to be checked, adjusted, or repaired, contact your service representative. · Do not keep using the machine with a fault or defect. Contact your service representative. · If the machine looks damaged or breaks down, smoke is coming out, there is a strange smell or anything looks unusual, immediately turn off the operation and main power switches then unplug the power cord from the wall. Do not continue using the machine in this condition. Contact your service representative. · Do not put any metal objects or containers holding water (e.g. vases, flowerpots, glasses) on the machine. If the contents fall inside the machine, a fire or electric shock could occur. · Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame. · Disposal can take place at our authorized dealer or at appropriate collection sites. · Dispose of the used toner cartridge in accordance with the local regulation. ii R CAUTION: · When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing fire or electric shock. · Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. · When the machine will not be used for a long time, unplug the power cord. · If you use the machine in a confined space, make sure there is a continuous air turnover. · Keep the machine away from humidity and dust. A fire or an electric shock might occur. · Do not place the machine on an unstable or tilted surface. If it topples over, it could cause injury. · After you move the machine, fix it with the caster fixture. Otherwise, the machine might move or come down to cause a personal injury. · Protect the equipment from dampness or wet weather, such as rain, snow, and so on. · Do not allow paper clips, staples, or other small metallic objects to fall inside the equipment. · Do not reuse stapled paper. Do not use aluminum foil, carbon-containing paper or other conductive paper. Otherwise, a fire might occur. · Do not eat or swallow toner. · Keep toner (used or unused) and toner bottle out of the reach of children. · For environmental reasons, do not dispose of the equipment or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer or at appropriate collection sites. · When removing misfed paper, do not touch the fusing section because it could be very hot. · Do not touch the anti-humidity switch from inside the machine because it could be very hot. · The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot surface". Otherwise it could cause a personal burn. · Rolls of paper can be heavy, so you should be careful when loading one. · This machine has been tested for safety using this supplier's parts and consumables.

Oct 05, 2009 | Ricoh FW 780 Black and White Copier

1 Answer

Why wont my Omron Blood Pressure Monitor work?


I contacted the manufacturer here is the response with information to contact them yourself if this does not help.


I am sorry to hear that you are having this issue with your readings and would be happy to assist you in determining where the problem lies.
Initially, I would like to provide you with some basic user information on factors that could impact the quality of your readings enough to cause the E error message you have been receiving. I will follow that with some critical steps that you must take in order to obtain a reading on your Omron unit.
User technique is important for reliable measurement results. Listed below are the common causes why you may get an erroneous reading:
Cuff Size - Measure the circumference of your wrist. If the incorrect cuff is used, you may get an inaccurate reading or error messages, if not at the first reading, then after a short period of use because the cuff bladder will be damaged. To determine your wrist size, measure your wrist approximately ½” above your wrist bone using a cloth tape measure. Wrap the tape measure evenly around your wrist. Do not pull the tape tight.
*The cuff that came with your unit is appropriate for wrist circumferences of 5 ¼ to 8 ½ inches. If your wrist circumference is not within that range, your readings will be inaccurate or you may receive error messages.
Cuff Application - Make sure you are wrapping the cuff around your wrist in the correct position. The cuff should be wrapped snugly around your wrist. If your wrist monitor can be used on either the left or right wrist, make sure you have set the monitor to the wrist you are using.
*If the cuff is wrapped too tightly or too loosely, your readings will be inaccurate or you could receive an error message.
Before Taking a Measurement - Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes and rest for 15 before starting the measurement. Avoid taking a measurement during stressful times. Take the measurement in a quiet place.
Body Position - Sit in a chair with your feet flat on the floor. If you do not have your wrist at heart level, your reading will be affected. Holding your arms or shoulders tensely may affect the reading. Remain quiet while taking the measurement.
The E error message is telling us that the unit is recognizing some type of interference while taking the reading. This could be as simple as speaking or moving, having a computer, cell phone or medic alert device too close to the phone, a loud television/radio in the same room or more complicated, such as a rapid or weak arterial pulse.
Reading Timing - Because Omron units read your blood pressure by 'listening' to the blood as it vibrates through the artery, the artery must be fully opened for an accurate reading. It is critical to wait a full 5-10 minutes between readings to allow the brachial artery to 'bounce back' from the initial constriction.
Refer to the Instruction Manual provided with the unit for the complete operating instructions.
If after reviewing the information above your unit is still not functioning properly, in order to best serve you, please call our Consumer Support team, toll-free at 800-634-4350. Our trained representatives are available Monday through Friday, 830a to 430p CST to assist you over the phone and try to resolve your issue without sending your unit in for repair. If repair is necessary, they can set up your file to start the process or provide valuable options to your particular situation.
Please have the following information available in order to expedite your call:

1. Model number (from the front of the unit)
2. Serial number (from the sticker on the side of the unit)
3. Proof of purchase information - from the receipt or online verification.

4. The wrist circumferences of all users of your unit.
They will be happy to assist you with your options regarding service.
We appreciate your interest in Omron products and want to ensure your satisfaction.
Please let me know if I may be of further assistance and have a wonderful day!


Jon McGillicuddy
Customer Service Representative
Consumer Support
Omron Healthcare, Inc.

Mar 03, 2009 | Omron Healthcare Blood Pressure Monitor...

Not finding what you are looking for?

926 people viewed this tip

Ask a Question

Usually answered in minutes!

Top i-mate Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

castletech
castletech

Level 3 Expert

372 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you an i-mate Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Loading...