Tip & How-To about Dell W4201C 42 in. Plasma HDTV

Service Menu Code

To get to the Service Menu on this TV do: Press the key, then enter 6 1 9 The service menu will appear. I've heard that on some software versions, this does not work if you have the input list set to ALL. It works regardless on mine.

Posted by on

Dell W4201C 42 in. Plasma HDTV Logo

Related Topics:

Related Questions:

1 Answer

digital input not working and greyed out on the menu.


Most JVC TV's with HDMI and Digital Input have an optical sensor inside the case to sense if someone is trying to bypass the hardware encryption. My JVC was exposed to sunlight prolonged sunlight and triggered this optical sensor which disabled my HDMI ports. This may be the same situation for you.

JVC HDMI Port Fix

Turn the TV on, and enter the Service Menu. Select 2 for Self Check. Then turn the TV off, and after the fan turns off, unplug the power cord. Reconnect the power cord, turn the TV on, and the HDMI port is re-enabled.


Here's how to get to Service Menu:

Before entering the SERVICE MENU, confirm that the setting
of TV/CATV SW of the REMOTE CONTROL UNIT is at the
"TV" side and the setting of VCR/DVD SW of the REMOTE
CONTROL UNIT is at the "VCR" side. If the switches have not
been properly set, you cannot enter the SERVICE MENU.
1) Press [SLEEP TIMER] key and while the indication of
SLEEP TIMER 0 MIN is being displayed, press
[DISPLAY] key and [VIDEO STATUS] key (Fig.2)
simultaneously.
2) The SERVICE MENU screen of Fig.1 is displayed.
3) Verify what to set in the SERVICE MENU, and set
whatever is necessary (Fig.1).
Refer to the SERVICE ADJUSTMENT for setting.
4) Press the [BACK] key to return the SERVICE MENU.

Dec 12, 2010 | JVC AV-56WP74 56" Rear Projection...

1 Answer

What is the code to service the Samsung Rear Projection TV HCN5527W


PLEASE BE ADVISED TAMPERING WITH YOUR SERVICE MENU MAY VERY WELL COMPLETELY DISABLE YOUR DISPLAY

Turn Melody off in the user menu this allows entering the Service Menu from "power on" state without using an additional lamp cycle.

With the set off, press Mute-1-8-2-Power in quick succession.

The service menu will appear for the input you were viewing before keying the above sequence in a minute or less.

Use the CH up the CH down and the select keys to navigate the Service Menu. Press MENU to return to the main Service Menu after viewing individual functions.

Later, you will use the VOL(+) and VOL(-) keys to change the Service Menu values.

I hope that this helps you, please be carefull with this information.
asnowman

Sep 27, 2009 | Samsung Televison & Video

Not finding what you are looking for?

1,928 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Dell Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Dell Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Loading...