Tip & How-To about Epson Office Equipment & Supplies

How to fix if carriage motor assembly is failed to operate

Symptom:- The CR motor assembly failed to drive the timing belt after power on.

Cause :- Foreign substances are lodged in the mechanism or The carriage motor assembly is defective.
Check Point:- Manually move the timing belt to see if the motor can rotate
freely.Measure the motor coil resistance(approx.>18Ohm). If the motor is shorted, also check the CR motor driver in MLC.
Solution:- Remove the foreign substances in CR assembly or Replace the CR motor and MLC if necessary..

Posted by on

Office Equipment & Supplies Logo

Related Topics:

Not finding what you are looking for?

3,533 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions