Tip & How-To about Broan-NuTone WS230 Kitchen Hood

The green fan-level indicators will operate properly but the fan/light will not turn on

Hi Mertl, I sure hope you found the solution since, but I am posting the answer for other people like me (and you) who need to find it !

The service manual says:

To replace the fuse:
1. Disconnect power at service entrance.
2. Remove filters, bottom panel, light wire harness, and air chute.

The fuse is actually right behind the fan controls, so to access it you need to disassemble everything that's in the way.

BTW, for anyone wondering if it's the fuse that's faulty, here's a clue:

If the fuse has opened (blown), the green fan-level indicators
will operate properly when the fan buttons/switches are pressed
- but the fan and lights will not turn on.

The fuse is a 5 x 20 mm, 10 Amp, Fast-Acting, 125V (min.).

Good luck all !

Posted by on

Broan-NuTone WS230 Kitchen Hood Logo

Related Topics:

Related Questions:

1 Answer

have a stellarscope made in France with no manual for use. Its a star finder hand held


Hi James Watkin!

I found this link below to a scanned copy of a Stellarscope:

http://www.theoriginalgift.co.uk/wcsstore/ExtendedSitesCatalogAssetStore/Attachment/1985040-IM.pdf

I also found two other answers in a post in the "Astronomy Forum" of a person presenting two sets of scanned pages (but, in this case, you will need to register in the forum to see the answers):

Thread stellarscope user manual

Hope you may find this answer helpful!

Best regards,

Miguel L. Martins

Dec 08, 2017 | Optics

1 Answer

How long does this take for an answer? is it on my email?


Hi Lorraine:
I'm not sure what you're asking about.
If you've posted a question on FIXYA and someone out there thinks they may be able to help, they will post an answer.
You will then get an e-mail telling you that there has been a response.
If you click on "view entire thread" it will link back to Fixya and you can see your question, the answer, and maybe even some comments.
If you want additional info regarding the reply, enter it as a COMMENT. That way the FIXYA helper will get a notification.
Hope this helps.

Jul 28, 2015 | Computers & Internet

2 Answers

How do I get my answer


Hi Mike,

When your question gets an answer you will be notified via email and also receive a notification on the website. To have a better chance at receiving an answer, make sure to provide as many details as possible so Fixya experts will have the information they need to provide a helpful answer.

Hope that helps!

Feb 09, 2014 | FixYa Service

2 Answers

were do i go to get your answers


Hi Troy,

Sorry, the site is a little confusing since it got revamped. If you post a question (like you did here), you basically just wait until someone answers your question. Then you will get an email notification that someone has answered your question (like you you got for this one). Any of the experts on the site that run across your question can post an answer. You will receive an email notifying you of each post that is made.

If you sign up for one of the expert's Pro services, it works pretty much the same, except the only one that will be answering is the Pro who's services you signed up for. The Pro services is a better way to get specific information about your vehicle, For instance, If you sign up for my Pro services, I can get you instructions, wiring diagrams, and picture diagrams from the service manual that explain the job you are doing. This type of information usually cannot be posted on the FixYa site either because of the size of the files or because of copyright issues. It is best to review the Pro's profile to make sure that the Pro's ratings and customer feedback indicates that the Pro is likely to get you the information and provide the services that you are needing.

Welcome to FixYa, I hope this information has been helpful.

-Dave (dttech)

Dec 03, 2011 | 2002 GMC Sierra

1 Answer

Changing fuse on Nutone Allure Ws2


Hi Mertl, I sure hope you found the solution since, but I am posting the answer for other people like me (and you) who need to find it !

The service manual says:

To replace the fuse:
1. Disconnect power at service entrance.
2. Remove filters, bottom panel, light wire harness, and air chute.

The fuse is actually right behind the fan controls, so to access it you need to disassemble everything that's in the way.

BTW, for anyone wondering if it's the fuse that's faulty, here's a clue:

If the fuse has opened (blown), the green fan-level indicators
will operate properly when the fan buttons/switches are pressed
- but the fan and lights will not turn on.

The fuse is a 5 x 20 mm, 10 Amp, Fast-Acting, 125V (min.).

Good luck all !

Aug 16, 2008 | Broan-NuTone Allure III QS330SS Kitchen...

Not finding what you are looking for?

1,312 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Broan-NuTone Kitchen Ranges Experts

Dan Phillips

Level 1 Expert

3 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a Broan-NuTone Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Loading...