20 Most Recent AT&T 1726 Digital Answering Machine Questions & Answers


need to record message

AT&T 1726... | Answered on Nov 20, 2012


Hello,
the answer is "yes". You can connect the 1726 answering system to a Fax-Phone.
In case you don't have the manual for the 1726 answering system, click here: http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000009219.pdf
Regards.

AT&T 1726... | Answered on Jun 21, 2011


Hi, dial your telephone number using a touch tone telephone. When the answering machine picks up and begins to play your outgoing message, enter your remote access code. Your answering machine will announce the number of messages you have and then beep twice.

Wait for the machine to begin to play your messages. It should start after about four seconds. Use the relevant keys to repeat, skip, save or delete a message. You can also repeat a part of a message or back up to previous messages.

AT&T 1726... | Answered on Mar 18, 2011


To get the manual you can get it on the link below. Scroll down to product detail to get the manual.

http://www.amazon.com/1726-Digital-Answering-System-Mailboxes/dp/B00006I529

If the manual does not load then you will need to download adobe reader on the link below.

http://get.adobe.com/reader/otherversions/

AT&T 1726... | Answered on Feb 13, 2011


The answering machine is supposed to save messages during a power failure. If the messages are gone, then the unit is defective.

AT&T 1726... | Answered on Sep 14, 2009


If you are at the machine and know which box the message is in, press and hold the button for the mailbox. The machine will then play old messages.

Here is a link to the 1726's userguide:

http://telephones.att.com/docMgt/public/art/285/1726_manual.pdf

AT&T 1726... | Answered on Sep 14, 2009


Here is a link to the 1726's User Guide:

http://telephones.att.com/docMgt/public/art/285/1726_manual.pdf

From page 9/13:

1) Call your telephone numer
2) During (or right after the announcement), dial your access code.
3) Press "5" during the session to use the various codes listed in the manual.
4) Press "*9" to end the call.

AT&T 1726... | Answered on Sep 14, 2009


Power Failure Recovery

If the system is disconnected from the AC power it will not operate. Your announcemen and messages are retained in memory during a power failure but you will need to reset the clock. See the instructions on the bottom of the unit. If the message window displays CL, you need to reset the clock. See the instruction on the bottom of the unit.

AT&T 1726... | Answered on Feb 25, 2009


Record Your Announcement

You must record your announcements (A, b,C and RO) one at a time.

1 Select the announcement you wish to record.

2 Press and hold "ANNC/SKIP". When the system beeps, speak toward the microphone normally, from about nine inches away.

3 To stop recording, release "ANNC/SKIP". The system automatically plays back your announcement.

To review your announcement, press and release "ANNC/SKIP".

To erase your announcement and return to the pre-recorded announcement press "DELETE" while your announcement is playing.

AT&T 1726... | Answered on Feb 25, 2009


Press "Delete", then press an MBOX button to delete all the messages in that mailbox

AT&T 1726... | Answered on Feb 25, 2009


Moving a Message to Another Mailbox

You can move a message from one mailbox to another. The message is saved a a new message in the mailbox to which it's been added and is deleted from the original mailbox.

1 While the message you want to move is playing press "setup". The system beeps and stops playback, the Message Window displays CP (for copy) and the Mailbox lights flash.

2 Press the MBox button where you want to move the message. The system resumes playing messages in the original mailbox.

AT&T 1726... | Answered on Feb 25, 2009


Press the mail box button quickly to hear only new messages. Press and hold until you hear the system respond to hear all messages. Press again to stop playback.

AT&T 1726... | Answered on Feb 25, 2009


System will not record messages

When memory is full, saved messages must be deleted before new messages can be recorded.

If RO (announce only) is selected, no messages will be recorded.

AT&T 1726... | Answered on Feb 25, 2009


Do you hear tones when you press the buttons to dial?Many phones have the option to dial by pulses instead of tones. Make sure your phone is set to tones.

AT&T Lands... | Answered on May 13, 2019


REREAD THE INSTRUCTION MANUAL . IT TOOK ME SEVERAL TRIES TO DO MINE . 40 YEARS AGO

AT&T Lands... | Answered on Mar 26, 2019

Not finding what you are looking for?
AT&T 1726 Digital Answering Machine Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

Cindy Wells

Level 3 Expert

5866 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

AT&T Lands Phones

  • AT&T Lands Phones

Most Popular Question

please let me know

  • Lands Phones
Loading...