20 Most Recent Lionel Cw 80 Transformer - Page 9 Questions & Answers

You may have to go to a Digitrax N /HO scale decoder for it to fit. The decoder handles motor functions OK but a sound N scale has very low volume as the speaker is very small. I have done this a few times with good results. Or put the decoder in the tender and run the 30ga wires to the engine

Check and see if there is a model number, serial number or barcode number on the kiln. Usually if you just put the number into a search engine e.g. Google, it can find the manufacture, etc.

Sounds like the power button may have gone bad.

Hello, Virginia - I have not yet found any online written instructions on how to use the Boye (not Boyer) Electric Yarn Ball Winder. You may find this video tutorial instructive: http://curvetube.com/Instructions_for_using_the_Boye_Electric_Yarn_Ball_Winder/hCF1jFCEpQ0.video The Boye company is owned by the Simplicity Creative Group. If you wish, you can contact the company and ask about the availability of printed written instructions for use of the Boye Electric Yarn Winder: https://www.simplicity.com/contactus/?topic=PRODUCT+QUESTION Best wishes.

Check the wiring again, or the switch mechanism is faulty. The acc transformer operates a solenoit when changing the switch direction so no irect contact with the track power. If your wiring is correct, the switch should be replaced, in my opinion

You should be able to change the font size in the software program.

Check the instruction manual.

Yes, you will damage the machine if you keep using it. Contact Pfaff. They have a customer service # on their website. Call them and see who is authorized to fix it, or call the shop where you bought it. Don't use it unless you are ready to get rid of it.

If your instructions don't tell you how, check the Cricut website.

Check the Cricut website for troubleshooting. You are not the first person with that problem.

Try WD 40.

Take it back to whoever just cleaned and oiled it, and tell them the issue.

Contact the manufacturer through the Customer Service number.

Call Customer Service.

Remeasure and recut the pieces. You somehow mismeasured one or more of the colors. Don't cut more than one color at a time, and fit it to the rest of the design before you cut the next piece.

Attach the handle material about 4 inches before where you want the handle. When you get to that point, start covering the handle and working it separately from the rest of the basket. When you get to the edge, rejoin the handle to the basket, and continue to cover the handle material for an additional 4 inches, then cut off the excess. Repeat on the other side of the basket.

Check the Lionel website.

No. It isn't designed to do that.

Every day that you can.

Not all locomotives have working smoke and whistles. If you think yours should, contact the seller or the manufacturer.