20 Most Recent 5701 VIPER 5701 2-WAY ALARM w/REMOTE START Questions & Answers

to find out what is going on do the logical thing
go knock on her door and politely ask what it all means
Then explain politely that is affecting your peace of mind and ask if she minds closing the curtains or ask if she can do something different
Sitting at home and wondering about it is making you loose your mind and the explanation and remedy is simply a matter of talking direct to the neighbour in a polite non abrasive manner

5701 VIPER 5701... | Answered on Nov 12, 2017

If you have replaced the battery in the remote, go to the fuse box and check the fuses.

5701 VIPER 5701... | Answered on Sep 17, 2017

To adjust the alarm sensitivity there is a sensor usually on the steering column with a plastic screw that can be turn to adjust the sensitivity. To change the setting you will probably need the manual for the alarm and there is a wire with a small button on that to program settings for alarm sound or remote start start and stop time.

5701 VIPER 5701... | Answered on Apr 26, 2017

First thing is to trip the system to see if the siren works then. If it does, then perhaps you inadvertently set the chirp commands to silent. If the siren doesn't work when the system is tripped then that's your problem. You'll need to find the siren and troubleshoot possible causes. I'd start with the wiring but the siren could have simply gone bad. You should be able to test it easily with a test light or multi-meter.

5701 VIPER 5701... | Answered on Mar 31, 2017

I see your problem and it is a shame it should cost so much to press a few buttons. How about you look at the below link and see if you can access the guides to reprogram your remote.


There is a lot of info on this web page and I think you should be able to get it working again and thanks for using FixYa.

5701 VIPER 5701... | Answered on Sep 27, 2016

Yes the best way is disarm the alarm and put in a Valet Mode
To activate the Valet Mode do the following:

There is a push button or toggle switch to disable the alarm (to engage the valet mode). Without knowing where this
switch is you won't be able to disconnect the alarm.

1. Put the key in the ignition and turn it to the "on" position.
2. Flip the toggle or hold the push button for at least 5 seconds.
3. The LED. light will stay solid on.
4. Turn the ignition off
5. Release the push button. If you have a toggle leave it alone in step 2

5701 VIPER 5701... | Answered on Feb 01, 2016

[PDF]Responder LE Model 5701 Security and Remote Start ...

the year, make and model of the vehicle; vehicle license number and vehicleidentification number. All ..... One five-button/2-way Supercode Responder LE RemoteControl. ? .... Disarm. Unlock LED blink for one second with 2 Beeps. Remote. Start..... Long-time Viper system users will notice the following differences:.

Viper LED 2-Way Security + Remote Start System

Viper's elegant new Responder LE transceivers mark a giant leap forward in 21st century vehicle security and remote start, and an evolutionary milestone for the ...

Viper 5901 remote start error fix - YouTube

? 2:38
Jan 13, 2013 - Uploaded by Power2ThePeopleZ
5901 won't start vehicle; gives an error. ... or even try to open the hood. the door remains locked when you start the car with theviper alarm.

Help With Programming/Pairing Viper Remote - YouTube

? 2:49
Dec 2, 2010 - Uploaded by Paul L
I have a two-way remote from my Viper 5901 system. ... The other car (one in video) has the Viper 5701 system in it. .... and then release 3) press the remote start button 2 times until pairremote is displayed 4)press and old ... I had the same problem that the remote won't pair with the system no matter what.

15964701 Viper 5701 2 way alarm w/ remote start won't

5701 VIPER 5701... | Answered on Jan 05, 2016

Unlock doors
Push and hold f button for 8-10 seconds until amber light is on solid
Push Remote start button for about 4 seconds till amber light flashes 3 times
Put key in to IGN position
Push valet (black button) one time and release
Push and hold valet button
Push either lock or unlock on viper remote
Key out of IGN
Test unit
The horn or siren may sound afterwards to indicate SUCCESS!!!!!!

5701 VIPER 5701... | Answered on Mar 20, 2015

The first problem is, you went to bestbuy. The second issue is the remote should not lose the pairing because the battery was removed. Your remote is probably defective.

5701 VIPER 5701... | Answered on Dec 01, 2014

Not finding what you are looking for?

343 questions posted

Ask a Question

Usually answered in minutes!

Top Viper Vehicle Parts & Accessories Experts


Level 3 Expert

905 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22393 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Viper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Viper Vehicle Parts & Accessories

  • Viper Vehicle Parts & Accessories

Most Popular Question

valet button located viper 5702

  • Vehicle Parts & Accessories