Top 20 SIM2 Domino 30 Multimedia Projector Questions & Answers

Lower the resolution of your laptop (or PC). With Windows update - assuming that's your OS - when you do an update, it might have also update the driver of your video card.

Hi. I find that often in times of bad weather, the HD picture on U-verse can become unstable like this. Likely they have a small outage from the hurricane last night. Try calling ATT, or giving it some time. This problem should rectify itself.

ATT contact information: http://www.att.com/gen/general?pid=1605

It could also be the projector, though. If the signal from your U-verse or Satellite devices is digital, or otherwise not compatible with the projector, this could cause the unstable picture issue. The following is from your projector's manual:

Image is disturbed, unstable or noisy:

- Verify compatibility of video/graphic signals with the technical
specifications of the projector.
- Check the integrity of cables connecting projector to various
sources.
- If the signal source is a terrestrial broadcast (via a VCR) check
that the receiving channel has been correctly tuned in and
that the aerial system is in good working order.
- Should the problem be present with a signal coming from a
video-recorder, ensure that the videotape is an Original "first
generation" copy and in good condition.
- Adjust the VCR's tracking control for optimum picture performance.
Ensure the VCR mode is active in the Picture menu.

Manual for your projector: http://sim2-extranet.com/files/downloads/down-Domino_20_30_21x21_UK_1.pdf

Regards,

D

Hi,
Welcome to Fixya. I would like to know what do you mean when you say that the picture is unstable? are you using the SIM2 Domino and you connect it to the receiver? How many receiver do you have?
Thanks

uninstall all of it,then reinstall,hope this helps

I am not familiar with your brand in particular but they are all pretty much the same. In the menu under settings you should be able to scroll to lamp settings. Under that category or something like that will be where you can reset the hours.

There is most likely a short circuit in the power supply unit, or on the main processor board.
You would have to disconnect the cables running from the power supply to the other boards and gradually reconnect them until the problem shows up again. If you have the service manual you could follow the fault finding procedure, but would need to have a lot of experience in electronic fault finding and the correct test instruments.

Edited for clarity. Full 'make model (what is is )' please first 3 words. Thermal cut out, thermal fuse, or burned out motor. They all have a suggested time limit for running them and is generally 20 minutes unless it is a commercial model and cost $1,200 to $4,000. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power It looks to be a capable machine, but no parts from 'Shredder Parts dot com'. https://www.google.com/search?q=Tech+Solutions+TS8000 ..

The series on the following link includes the model you are asking about. EMERSON FINCOR 2330MKII SERIES EQUIPMENT MANUAL Pdf Download ' ManualsLib

Question edited for clarity.

Canon imageCLASS MF3010 - Error Codes

PrintCopy .info https://printcopy.info > model=imageCLASS+MF3010 Error Codes List page 1 · Code: E000 · Description: Startup failure · Remedy: (1) Check the connectors of the Fixing Assembly. (J101, J1011, J552 and J702) (2) ... ..

You posted to the Category 'Cars and Trucks'? shedding? Help in the link https://www.google.com/search?q=Tech+solutions+mod%23+TS8000 All questions need 'make model (what is is)' as first 3 words. Thinking that this might be a 'shredder' gives better results, we also have a Shredder Category, so I moved it. Shredders have an overheat thermal cut out and also a thermal fuse. It may reset itself. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power ..

Try "supervisor" as the username (no password).

No money ever! There is no payment made for answers on Fixya, points don't mean prizes, they are just for fun. ADMIN Andrew

• Answers: 65,820 and not a penny per Answer.

Head over to www.justanswer.com they pay lots of money because they charge for people to ask a question. ..

Question edited for clarity. Help in the link https://www.google.com/search?q=farex+frm+04+error+126 ..

Question edited for clarity. https://www.google.com/search?q=OCE+error+code+22550+22515 ..

This link is the best I can come up with: How to fix E6 & E7 on Trojan treadmill solved!! (youtube.com)

All questions need full 'make model (what it is)'. Posted to Office Equipment. Is this a Point of Sale Cash Register. Answers can usually be found on Google but 'farex 04' doesn't show much, but there is an FM04? https://www.google.com/search?q=farex+04+error+78 ..

Question edited for clarity correct spelling, turn question around. https://www.google.com/search?q=porpo+yh2000+calculator+calculate+sine ..

https://www.google.com/search?q=write+sin%5E2(x)+on+my+TI-84 ..

When you have no driver for this Windows version and the former did not work, even in compatibility mode, then try the free program IrfanView. In the File menu first go to Select scanner source. VueScan is also a program supporting many scanners but not free.

Refer to pages 92 and 98 in the manual regarding error code. Switching it off and on may help (page 32). If such does not resolve the issue, you may have to consult your system administrator or the Xerox Welcome Center. 1 (800) 835-6100