http://www.fixya.com/support/p96987-siemens_wiq1430_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 28 Dec 2009 18:15:53 GMT80http://www.fixya.com/support/t194539-kenmore_elite_he3_front_loading_washerI have had alot of trouble with this washing machine. I have had it for a 1&1/2 years. First the rubber around the door went out and now on of one of the plastic things connected to the steel drums broke off. It is suppose to be such a great washer...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t196807-front_panel_removalOpen door button is tuck. We are trying to remove the front control panel for access so we can un stick the buttonMon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t199171-drain_pump_replacement_instructionI have a top mount Roper washer that's leaking from the Drain Pump (It's the only thing that's wet when i looked in the bottom). Is it possible to get a step by step instruction on replacing the pump?Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t199347-miele_washing_machine_model_w713_front15 years old - no previous maintenance done Filters maintained clean. Problem: 1) machine leaks water underneath after completing wash & rinse cycle 2) always washes a very long time ( approx. 3 hours to complete) regardless of pressing short...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t205803-washing_maching_not_taking_fabicHi, this machine is about 7 years old and work fine, except in the last couple of weeks it no longer takes in the fabic softner from the rinse draw. Apart from that everything is OK. Any idea on what's wrong?Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t208779-kenmore_washing_machinemy machine will not spin the timmer stops when it reaches the spin cycleMon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t210235-whirlpool_top_load_washing_machineThe agitator won't move during the washing cycle and the it will not dispense the softener. When the machine is off you can spin the agitator freely with your hand.Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t209335-whirlpool_washer_awm5100ACQUIRED ABOVE WASHER. UNACCOMPANIED BY INSTRUCTIONS MANUAL. PLEASE ADVISE HOW TO USE THIS MACHINE. THANKS.Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t213099-kenmore_washer_drain_pump_not_comingFills fine, agitates, gets to drain cycle and nothing happens- no noise from the pump- more common pump problem or timer problem?Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t213323-final_spin_cycle_kenmore_417_40042990My washer will not do the final spin cycle in any mode of wash, regular,perm press,etc. until I move the timer back to the begining of the final spin cycle after the initail cycle is over.The motor and timer have been changed.Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t213531-hoover_premier_10_1_kg_washing_machineOn the spin cycle the motor rotates, water is pumped out but the drum is not spinningMon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t223267-hot_cold_water_knob_will_not_workI have a Kenmore 90 Series washer Model number 20922991. The knobs for all the different water temps. work such as Warm/Cold, Cold/Cold, etc. When I turn the knob to Hot/Cold no water comes out. Please advise. Thank you.Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t223531-kenmore_series_70_washer_model_110Washer fills, but will not spin.? No motor noise at spin cycle.? Did a large load break it?? The wash bin appears to be loose.? There is nothing for the pokey piece in the lid to press to activate the spin cylcleMon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t224347-spots_white_clothesHI, MY CLOTHES HAVE BROWN SPOTS, LIKE TAR/GREASE, AND THE SAME APPEAR ON THE AGITATOR. SIMILAR DRIPS RUN UNDERNEATH THE AGITATOR BASE. THANKS A LOT, BARBMon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t229311-brushesI need to replace my brushes on my brosch wfl2063gb. Not sure how to get to them?Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t234563-whirpool_washerHi, I have only had my washer for 3 years. It will fill up with water and drain. It will not spin or agitate. Please help i dont want to get rid of it but i dont want to pay a future to get it fixed if it is something expensive.Thank youMon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t239959-non_spinning_washerMy washer will not spin on it's own. We replaced the drive belt. After we replaced the belt we reconnected everything and tested. It spun for 5 seconds, creaked, and then quit. The belt was warm to the touch. When I tried to turn the tub manually the...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t240671-hoover_nextra_1200my washing machine has stopped rinsing and spinning on certain programmes but not all the timeMon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t242835-whirlpool_front_loader_washing_machinewashing machine will not drain, stays on spin cycle for ever and is only draining a slight trickle. have checked filter and only found two small coins, removed them, still wont drain properly, tried to fluch hose through with tap, still wont drain...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t241531-washing_machine_wont_drainmaytag old...about 20yrs.... will fill up... when it comes to spin cycle to drain its like there no pressure from the pump.... if you put the drain hose low the water will drain out of the machine ...no probs.... not sure if i need new belts... or...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t247075-kenmore_washer_odorI have a 70 series Kenmore washer and there is a mildew odor coming from the tub. It does not effect my clothes but then again I use fabric softner. Can you please help me find and fix the problem. Tanks!Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t248071-bleach_spilling_directly_clothesI have a Whirpool front loader and sometimes when I add the bleach, it drains directly into the tub and on to the clothes. The bleach is supposed to be added during the rinse cycle. Sometimes it works and sometimes it doesn't. I have made sure that...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t249311-washer_displays_fl_codeWasher displays FL code Hi Where do I find the model number for my machine. It's a Kenmore Elite Calypso Motion Top Loader? I am getting an error code of FL and need to trouble shoot problem but, I have no manuel - I inherited the machine with no...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t249387-whirlpool_top_load_washerI replaced the transmission because it leaks and made a loud noise, now it works fine except when it goes into the spin cycle it sounds like there,s a bowling ball in the tub. With the tub empty in the spin cycle if I open the lid and by pass the...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t250099-maytag_lat9356aae_drive_pulley_stuckThe washing machine will proceed through all wash cycles, it will proceed through the spin cycle, but the tub will not spin. The pulley seems to be stuck, it will not move past 1/4. The belt tension is okay, and the belts are in good repair. The...Mon, 28 Dec 2009 18:15:53 GMThttp://www.fixya.com/support/t252351-washer_keeps_drainingMy Fridgidaire washer model # FWS1339ECO seems to keep draining even though is agitating. So it stops every minute or less to refill. That happens over and over all thru the wash cycle. Is the drain cycle sticking on?Mon, 28 Dec 2009 18:15:53 GMT