HP iPAQ 510 Voice Messenger Smartphone - Answered Questions & Fixed issues

First Option:Phone in the Other Sim and check the Phone Network Signal If Network Signal Problem not Solved SoSecend Option:Your Phone Network IC Fault So Please change Network ICAnd Network Signal Problem will Solvedif it is there isn't much you can do on this side of the network.Contact your phone company.

HP iPAQ 500 Voice Messenger Series - Resetting the DeviceSometimes you need to reset your iPAQ if, for example, it is not responding to your pressing a button or your tapping the screen.There are two types of resets.

• Soft Reset - A soft reset stops all running applications, but does not erase any programs or saved data.
• Factory or Hard Reset - A factory or hard reset clears all user-installed settings, programs, and data, and restores your iPAQ to factory settings.

Performing a Soft ResetPerform a normal or soft reset to stop all running applications, to restart the iPAQ after installing a new application, or if the iPAQ locks up.CAUTION:Make sure to close all running applications before performing a soft reset, since a soft reset erases all unsaved data in such applications.Perform a soft reset using one of these two options.

• Turn off the iPAQ by holding down the End key.1 - End Key
• Remove the battery of your iPAQ.

Performing a Factory or Hard ResetPerform a factory or hard reset when there is a need to clear all settings, programs, and data from the RAM.CAUTION:Performing a hard reset will return the iPAQ to its default settings and it loses all information (files and settings, among others) that is not recorded in the ROM. Back up all important information or data before performing a hard reset.Follow these steps to perform a hard reset and return your iPAQ to factory settings.

1. Turn off your iPAQ by holding down the End key.
2. Then hold down the center of the 4-Way Navigation key and turn on the iPAQ again while continuing to do so.1 - 4-Way Navigation Key2 - End Key
3. A confirmation screen opens asking whether you want to perform a hard reset or not. SelectYes . The iPAQ will reboot with its original factory settings.

NOTE:The applications and data present on your iPAQ before performing the hard reset can be reinstalled by synchronizing your iPAQ with a computer using ActiveSync/WMDC (Windows Mobile Device Center).NOTE:If you don't want the iPAQ playing a tune after you turn it on, create a new text document and save the document as StartUp.wav. Replace this new document with the file on your device.

Here it is:
http://www.retrevo.com/support/HP-rx1955-PDAs-and-Handhelds-manual/id/400ci760/t/2/

Hi,


Just Restore factory settings it will get solved. If the problem not solved then call your service provider they will tell you about the settings you just set that settings on your IPaq


Regards,
Harish



// Feel free to vote this answer with 4 thumbs up //

its you voice and sound settings of phone.

Easy and lazy way. Just turn on your phone, connect it to a USB port, use Windows Mobile Device Center without synchronizing it, and go to main folder of your phone and copy your *.pim files from root folder to another place. When you have another Windows Mobile (same version or newer), just paste that file on your root folder of your new mobile phone. That's it.

Hi there your question not much clear. Can you please give a brief explanation?

Hi there,
For hanging/Jam problem, few factors can be involved, First of all you have to check, how much space is being left in phone memory after installing particular applications, To check the settings, Go to settings, Memory,
Solutions:
1. Soft Reset,
Try resetting the device while hold down the End Key for few seconds, when the phone is switched off take off battery for few minutes, then try putting the battery again, It will clear the memory used by the softwares,
CAUTION: Make sure to close all running applications before performing a soft reset, since a soft reset erases all unsaved data in such applications.



2. Hard Reset
Hard reset will restore your Ipaq to factory default settings, Perform a factory or hard reset when there is a need to clear all settings, programs, and data from the RAM.
settings.

1. Turn off your iPAQ by holding down the End key.
2. Then hold down the center of the 4-Way Navigation key and turn on the iPAQ again while continuing to do so
   
   3. A confirmation screen opens asking whether you want to perform a hard reset or not. SelectYes . The iPAQ will reboot with its original factory settings.

NOTE: The applications and data present on your iPAQ before performing the hard reset can be reinstalled by synchronizing your iPAQ with a computer using ActiveSync/WMDC (Windows Mobile Device Center).

if you require more assistance feel free to reply to this post
Thanks for using FixYa
Regards-BA

To get the Unlock code You can REACH here
http://www.mobileunlocksolutions.com/hp-ipaq-510/rs1wp9/ and Unlock HP IPAQ 510.

You can get the manual on the link below.

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&contentType=SupportManual&prodTypeId=215348&prodSeriesId=421399#2

Good Luck please rate 4 thumbs up and please leave a testimonial

any mobile & memory card and other many devises unloke code
simply connect it to the pc and open its file in note pad and
FIND YOUR PASSWORD

Use unlock code to unlock your mobile....Get the unlock code here http://www.wickedunlock.com/unlock-your-phone/rs11wp2/ and also get the unlock instruction in the same site....With the help you can unlock easily....

use google search or go to hp ipaq website.maybe can find a solution~~~~

Hi..

You can download from the below link..
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&prodClassId=-1&contentType=SupportManual&prodTypeId=215348&prodSeriesId=1132544

Good Luck:-)

Wlcome to FixYa
Do Following:

• Determine the number that you wish to block. If it's a harassing call, write down the number that appears on your caller ID. If the number is coming from an automated system, you may need to call the owner of the institution responsible for the calls, and have it corrected.
• Call your cellular provider's Customer service department. This phone number can be found on the provider's website.
• Avoid the automated system by continually pressing zero. With a representative on the phone, identify yourself, your account, your phone number and provide any password information if instructed. Explain your request to the representative, emphasizing the speed with which you need your request filled. Offer your phone number and the phone number you wish to block on your account. Obtain the representative's name, title and extension.
• Contact your cellular provider's technical support department immediately after speaking with the customer service representative. This number can also be found on the provider's website. While a customer service representative may have already handled the problem, technical support can verify its completion. Provide the customer service representative's pertinent information to clarify and expedite the tech support's search. Ask if your request has been handled, technically-speaking. Obtain the tech support representative's name, title and extension.
• Wait 24 to 48 hours. If the phone calls continue from the blocked number, contact customer service. Immediately ask to speak with a supervisor or manager. Explain to the superior your unresolved issue, provide the names and extensions of the previous representatives, and wait on the line until the number is successfully blocked. Again, ask to be transferred to technical support to verify the correction. If the problem continues, repeat until it is resolved.

So you need Assistance of Network Provider to Block...Hope you got an Idea...If this Helped you-Vote Me..Thanks for Contacting FixYa....

The fault is from the phone keypad.

Switch of your phone, remove the battery, use a phone screw driver to loose your phone to access the internal keypad board. Clean the keyboard with cotton wool and a little liquid carefully, allow it dry and couple the phone back.

You could test the phone before coupling it back.

Best wishes.

You can download and print your manual here:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01071521/c01071521.pdf

go to the sync settings and change the setting so that you backup on your device application. outlook is cool too. i use it and its wonderful. any version of outlook is fine. by default, it saves to outlook but if you go through the customised or advance settings,, you can change it to save into the device center

copy the phonebook on your sim, then transfer it to another phone then save all the contacts to the sim 

Press
Start-settings-profiles-normal(or profile wich you want to change)-press menu on the profile-then choose edit.
And there you will find -
Ring volume
Alarm volume and others.